Jwin JX-CD476 - Manuals

Jwin JX-CD476 – Manual in PDF format online.

Manuals:

Manual Jwin JX-CD476

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - LOCATION OF CONTROLS; CONTROL OPERATION AND FUNCTION; POWER SUPPLY; DC OPERATION; ALKALINE BATTERY INSTALLATION (NOT SUPPLIED); CHARGING AND USE OF RECHARGEABLE BATTERIES; RECHARGE INDICATOR

E.1 LOCATION OF CONTROLS CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size “AA” alkaline batteries (not included), or use the ACadaptor 4.5V 600mA (not included) AC ADAPTOR OPERATION Plug one end of the AC adaptor into the DC 4.5V jack, then plug the other end intoAC wall ou...

Page 3 - CHARGE SWITCH

E.2 BATTERIES MAY EXPLODE OR LEAK. 2. Plug in the AC adaptor. (not included)3. Slide the charge switch to ON position to start charging. The charge indicator will light up. USE ONLY THE AC ADAPTORFOR CHARGING. 4. After 15 hours, please unplug the AC adaptor and slide the recharge switch to OFF posit...

Page 5 - Program number; THE CD MODE BUTTON; CD Mode button pressed

E.4 During programming, “PROG” flashes in the display. NOTE: Programming is possible in the STOP mode. 1. Press the PROGRAM button in the STOP MODE. The “PROG” appears in the display.2. Press the skip button ( ) to select the first track to be programmed. 3. Press the PROGRAM button again to enter t...

Jwin Manuals