Jwin JX-CD476 - Manual
Jwin JX-CD476 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – LOCATION OF CONTROLS; CONTROL OPERATION AND FUNCTION; POWER SUPPLY; DC OPERATION; ALKALINE BATTERY INSTALLATION (NOT SUPPLIED); CHARGING AND USE OF RECHARGEABLE BATTERIES; RECHARGE INDICATOR
- Page 3 – CHARGE SWITCH
- Page 5 – Program number; THE CD MODE BUTTON; CD Mode button pressed
- Page 6 – CLEANING THE PICKUP LENS
- Page 7 – CD PLAYER SECTION
- Page 8 – TROUBLE SHOOTING GUIDE; SOLUTION
PORTABLE
COMPACT DISC PLAYER
WITH ANTI-SHOCK 10SEC.
INSTRUCTION MANUAL
PLEASE READ CAREFULLY BEFORE USING YOUR UNIT
MODEL: JX-CD476
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
E.1 LOCATION OF CONTROLS CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size “AA” alkaline batteries (not included), or use the ACadaptor 4.5V 600mA (not included) AC ADAPTOR OPERATION Plug one end of the AC adaptor into the DC 4.5V jack, then plug the other end intoAC wall ou...
E.2 BATTERIES MAY EXPLODE OR LEAK. 2. Plug in the AC adaptor. (not included)3. Slide the charge switch to ON position to start charging. The charge indicator will light up. USE ONLY THE AC ADAPTORFOR CHARGING. 4. After 15 hours, please unplug the AC adaptor and slide the recharge switch to OFF posit...
E.4 During programming, “PROG” flashes in the display. NOTE: Programming is possible in the STOP mode. 1. Press the PROGRAM button in the STOP MODE. The “PROG” appears in the display.2. Press the skip button ( ) to select the first track to be programmed. 3. Press the PROGRAM button again to enter t...
