Page 2 - Safety Precautions; IMPORTANT SAFEGUARDS
Safety Precautions IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated int...
Page 6 - Information for Users on Disposal of Old Equipment; Maintenance; Screen
Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling...
Page 7 - Contents
Contents Safety Precautions ........................................................ 2 IMPORTANT SAFEGUARDS ................................... 2Maintenance ............................................................. 6 Controls and Features .................................................. 8 Fron...
Page 8 - Controls and Features; Front panel; Menu control button; Volume control button*; Tally lamp
8 1 3 6 7 2 4 5 Controls and Features 7 Front panel 1 Speaker (Monaural) Outputs the audio signal of the selected input. 2 CHROMA/PHASE button* 1 Activates the Chroma (picture color density) adjustment mode or the Phase (picture hue) adjustment mode.• Press the button to select the mode, then adjust...
Page 9 - INPUT SELECT buttons/lamps; Power lamp
9 q 8 9 w p ENGLISH 8 ASPECT button/lamp Changes the aspect ratio of the picture from 4:3 to 16:9.• When “16:9” is selected, the lamp lights up. • To return to 4:3, press the button again.• Use this function when the picture of 16:9 aspect ratio is squeezed into 4:3 format signal. NOTE: • When displ...
Page 10 - Rear panel; AC inlet; COMPONENT terminals
10 Controls and Features (cont.) 7 Rear panel 1 AC inlet Power input connector. Connect the provided AC power cord to an AC outlet (AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz). 2 VIDEO terminals a VIDEO 1 terminals (BNC) Input (IN) and output (OUT) terminals for the composite signals.• The IN and OUT term...
Page 11 - SDI terminals; Security slot
11 ENGLISH 5 SDI terminals g AUDIO 1 terminal (pin jack) Input terminal for the analog audio signals.• Use the SDI 1 terminal for the video connection. h AUDIO 2 terminal (pin jack) Input terminal for the analog audio signals.• Use the SDI 2 terminal for the video connection. i SDI 1 terminal (BNC) ...
Page 12 - Installation; Using the monitor on the stand
12 Stand Monitor VESA mounting holes Screw (M4 x 10) Installation NOTE: • Do not rest your arm on the monitor or lean against the monitor.• Do not hold the LCD panel when installing the monitor.• Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage ...
Page 13 - Installing the monitor on the wall; Installing the monitor on the rack
13 VESA mounting holes(See page 22 for the specifications of the mounting holes.) ENGLISH 7 Installing the monitor on the wall Use a commercial wall mounting unit compliant with the VESA standard (100 mm x 100 mm). NOTE: • Detach the stand first. ( ☞ page 12) • Ask your dealer to install. 7 Installi...
Page 14 - How to Use the MAIN MENU; MAIN MENU items; BACK LIGHT; all reset
14 How to Use the MAIN MENU The MAIN MENU contains the functions for daily use. Operation guide Shows the buttons for each operation. 7 MAIN MENU items BACK LIGHT Adjusts the brightness of the display. Setting value: 00 - 25 APERTURE Adjusts the clearness of the picture. Setting value: 00 - 10 CTI. ...
Page 15 - How to Use the SET-UP MENU
15 ENGLISH How to Use the SET-UP MENU The SET-UP MENU contains the initial settings of the monitor. SET-UP MENU NOTE: • The menu automatically disappears in about 30 seconds after the last menu operation. • Some items may not appear on the menu. Those items are not available for the current input or...
Page 16 - REMOTE SETTING
16 How to Use the SET-UP MENU (cont.) 7 SET-UP MENU items PICTURE SUB ADJ. Sets the standard level for the picture adjustments by using the CHROMA/PHASE and CONTRAST/BRIGHT buttons on the front panel. CONTRAST* Adjusts the standard level for contrast adjustment. –20 - 00 - +20 BRIGHT* Adjusts the st...
Page 17 - NO SYNC FUNCTION; TALLY SELECT; STATUS DISPLAY; CONTROL LOCK
17 ENGLISH NO SYNC FUNCTION Selects the screen status when no signal is being input. NO SYNC DISPLAY Sets the screen status when no signal is being input. OFF, SUSPEND (suspend mode), GRAY (gray screen) DELAY TIME Sets the period until the screen status changes after signals stop coming in. 5, 20, 6...
Page 18 - How to Use the External Control; About the external control; How to use the MAKE/TRIGGER terminal
18 How to Use the External Control 7 About the external control The monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the MAKE (make contact) or TRIG. (trigger) system. MAKE (make contact) system: Controls the function by short-circuiting the corresponding pin termina...
Page 19 - Troubleshooting
19 ENGLISH Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) Ref...
Page 21 - Specifications
21 ENGLISH Specifications Model TM-15L1D Type LCD Display Monitor LCD panel 15”, active matrix TFT Effective Screen Size Width: 304.1 mm (11 15/16”) Height: 228.1 mm (8 15/16”) Number of Pixels Displayed 1024 x 768 Horizontal/vertical Frequency H: 15.625 kHz/15.734 kHz V: 50 Hz/59.94 Hz Input/Output...
Page 22 - Dimensions
22 Specifications (cont.) 7 Dimensions Unit : mm (inch) Front View Side View Rear View (without the stand) 342 (13 1/2) 291 (11 1/2) 70.5 (2 7/8) 28.5 (1 1/8) 330.6 (13 1/8)* / 295.6 (11 3/4)** * at the higher position** at the lower position 100 135 (5 3/8) 100 VESA mounting holes(Size: M4, depth: ...
