JVC TK-C1480 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS; or aerosol cleaners. Use a damp cloth for cleaning.

E-2 IMPORTANT SAFEGUARDS PORTABLE CART WARNING (symbol provided by RETAC) S3126A 1. Read all of these instructions.2. Save these instructions for later use.3. All warnings on the product and in the operating instructions should be adhered to.4. Unplug this appliance system from the wall outlet befor...

Page 3 - CAUTION; Safety Precautions; CONTENTS

E-4 FOR USA AND CANADA CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS I N S I D E . R E F E R S E RV I C I N G T O QUALIFIED SERVICE PERSONNEL. The lightning flash wish arrowheadsymbol, within an equilateral triangle isintended to alert the use...

Page 4 - Features; INTRODUCTION; Operating Precautions

E-6 A new DSP (Digital Signal Processor)features a Extended Dynamic Range(ExDR) and enables to shoot both brightand dark locations. The use of a new CCD with a SENSE UP( X 3 2 ) f u n c t i o n r e a l i ze d t h e m i n i mu mluminous flux density for subject of 0.8 lx(F1.2, 50%, AGC 20dB) and 0.02...

Page 5 - Lens mount; b y t u r n i n g i t; Camera-mounting bracket; Be sure to use a 6 mm long screw.; Controls, Connectors and Indicators; Cover; When the button is pressed, a menu

E-8 INTRODUCTION 1 Lens mount This means to attach the lens.This is applicable to both the C-mountlenses and CS-mount lenses. 2 Backfocus adjustment ring Adjusting the back focus dur ing lensinstallation.When readjustment is required, loosent h e l o c k i n g s c r e w 3 b y t u r n i n g i t count...

Page 6 - right Button; terminates at 75; NOT USED; To input DC 12V or AC 24V power.; signal connection terminals; ON the EXT.TERM switch; Signal

E-10 INTRODUCTION 13 [ , , , ] Up-and-down, left-and- right Button These buttons select items on the menuscreen and change a set value.( Page 23) 14 [EXT.TERM-ON/OFF] Terminal On/OffSwitch of External SynchronizationSignal This is a terminating ON/OFF switch forthe external synchronization input sig...

Page 7 - VIDEO CASSETTE RECORDER; CONNECTION/INSTALLATION; System with up to 8 cameras; MEMO; Confirm that the image from the camera to be checked; Connecting the control signal cable; switch on the power again.; Setting on the MENU screen (; MACHINE ID setting switches; When connecting

E-12 REC PLAY FF REW REVERSE PAUSE/ STILL REC CHECK STOP/EJECT COUNT/CLOCK TIMEMODE TIMER REC AL/PLRESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.LOCK RESET /CANCEL OPERATE SR-L910 OPE. LOCK 1 TO CAMERA TO CAMERA DATA I / O DATA I / O RX RX+ RX RX- TX TX+ TX TX- COM COM 1 2 3 4 5 6 7 8 COM ...

Page 8 - Monitor; Procedures; Attached 4 pin plugs

E-14 CONNECTION/INSTALLATION SET MENU CAMERA SETUP EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF IOT USED ON LLSIMPLEXON VIDEO DC ALC LEVEL Av Pk L H DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLA TED POWER ONL Y (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B C D SEE INST- RUCTION MANUAL...

Page 9 - Connections on the back; Power supply; • Genlocking is not possible with a signal

E-16 DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLA TED POWER ONL Y (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B C D SEE INST- RUCTION MANUAL 1 + - 2 Connect the DC 12 V or the AC 24 V powersupply to the DC 12V/AC 24V terminals. Top r eve n t c o n n e c t i o n e r r o r s o r ...

Page 10 - Mounting the camera; Fall Prevention; Fixing screws; Installation of camera

E-18 DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLA TED POWER ONL Y (E TYPE) TX + TX - RX + RX - AUX Y/C OU T SYNC IN POWE R VIDEO OUT GND A B C D SEE IN ST- RUCTIO N MANU AL + - 1 2 2mm 6mm M3 x 6mm MAX. 7 mm Mounting the camera CONNECTION/INSTALLATION Camera mountingscrew Camera-mounting bracket Rotation...

Page 11 - Lens adjustment; Monitor screen; Back focus adjustment

E-20 CONNECTION/INSTALLATION Lens adjustment ALC LEVEL Av Pk L H Connect the camera according to the connection method, turn it on, display an image on themonitor, and check the image. The camera has been factory-adjusted to the best position, butit may need to be adjusted according to the object co...

Page 12 - Auto white balance control adjustment; Error message display; AWC button; MENU SETTING; Setting the menu; The MENU screen is displayed.; MENU button

E-22 CONNECTION/INSTALLATION Auto white balance control adjustment Each light source has its own colour temperature. Therefore, when the main light sourcelighting an object is changed, the white balance should be adjusted again by pressing theAWC button. 1. Place a white object under the samelightin...

Page 13 - The flow of menu screen; The word “COLOUR” is displayed as “COLOR” on the TK-C1480U.

E-24 ME N U S Y N C A D J U S T V I D E O A D J U S TMOD E E S L E C T A L C S E T T I NGS C OMMUN I C AT I ON F A C TOR Y S E T T I NGS MOT I ON D E T E CT S Y NC D A J U S T V P HA S E 0 H P HA S E 0 S C E COARS 0 S C F I NE 1 2 8 DE V I O AD J U ST WH T E B A L E A T W NC A I C O OUR L E N ORMAL ...

Page 14 - SYNC ADJUST Screen; The ExDR does not function.; NORMAL

E-26 Item Functions and set values Initial value V PHASE H PHASE SC COARSE SC FINE This adjusts the vertical synchronization to those of other cameraswhen a selector switch for the synchronizing system on the sideis at LL. (50Hz (60Hz) power region only. ( ): TK-C1480U)When it is not set to LL, “---...

Page 15 - Item

E-28 Item Functions and set values Initial value FAST LIMIT ExDRLEVEL M.ExDRSPEED AGC MODE SENSE UP This sets the fastest value of a shutter speed when AUTO is set.The MANUAL, M. ExDR, A. ExDR set value is displayed as “- - -”and cannot be changed. The higher the shutter speed becomes,the more smear...

Page 16 - VIDEO ADJUST Screen; MODE SELECT Screen; MOTION DETECT Screen

E-30 Item Functions and set values Initial value WHITEBALANCE COLOURLEVEL ENHANCELEVEL PEDESTALLEVEL AUTOBLACKCTL Selects the white balance adjustment function. The whitebalance can be adjusted manually or automatically forlight within the colour temperature range of 2500K to8000K.• ATW: Auto-Tracki...

Page 17 - DEMONSTRATION; COMMUNICATION Screen

E-32 Item Functions and set values Initial value LEVEL AREA EDIT ALARM TIME DEMONSTRATION NORMAL – 10s – MENU SETTING MOTION DETECT Screen(Continued) This sets the level that detects motion.If the item MODE is set to OFF, “- - -” will appear, andsettings cannot be changed.To function with large sign...

Page 18 - BLC EDITTING Screen; Press the SET button.; Manual Adjustment of White Balance

E-34 BLC EDITTING Screen MENU SETTING It is possible to set freely the light metering area for backlight compensation. The 2 screensof EDIT1 and EDIT2 can be set. CAMERA SETUP SET MENU AWC L A C S E T T I N GS I I R S L E V E L NORMAL A E V R A GE : P E AK 8 2 : S U T H T E R E x DR ) ( N RMAL O P I...

Page 19 - The screen returns to MODE SELECT.; CAMERA TITLE Setting; Setting the MOTION DETECT Function; The setting screen is brought up.; * It is possible to check and confirm the set

E-36 1. Select the item CAMERA TITLEon the MODE SELECT screen,and push the SET button. Then, the CAMERA TITLE screen isbrought up. 2. Select the first character from thecharacter area using buttons. The selected character is displayedflashing on and off. 3. Push the SET button. The first character g...

Page 20 - OTHERS; Installing the ferrite core; Wind twice; Specifications; Synchronization method :

E-38 OTHERS Installing the ferrite core To retain electromagnetic compatibility, use the ferrite cores provided when connecting to the lens orthe power source. VIDEO DC IRIS ALC LEVEL Av Pk L H Notes: Install the ferrite cores within 50 mm of the camera-side connectors. (Fasten the ferritecore with ...

JVC TK-C1480 - Manual

Table of Contents:

Summary

Other JVC Models