JVC DLA-X35 - Manual
JVC DLA-X35 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Note; Setting up an iOS device
- Page 3 – Confirming connection between the projector and iOS device
- Page 4 – Confirm connection status between the projector and iOS app
- Page 5 – Notes; Setting menu
- Page 6 – ©2013 JVCKENWOOD Corporation; Trademarks; their respective holders.
1
D-ILA Home Theater Projector
Initial Setup Manual Ver. 1.0 for Using iOS App
This manual describes initial setup to remote control JVC D-ILA projector (hereinafter referred to as the projector)
using iPhone, iPod touch and iPad.
DLA-X95R, X75R, X55R, X35, XC7800R, XC5800R, XC3800, RS66, RS56, RS4810, RS48, RS46
The following conditions are necessary to remote control the projector using iPhone, iPod touch, and iPad.
•
Compatible iOS device: iPhone 4, iPhone 4S, iPod touch (4th generation), iPad (3rd generation)
•
Compatible OS: iOS 5.1 (iOS6 is currently under study)
* The app is not compatible with Android OS devices.
* Operability of all functions is not guaranteed.
* In order to remote control the projector from an iOS device (e.g. iPhone, iPad, or iPod touch), it is necessary to
first install exclusive app into an iOS device. Exclusive application is available free of charge.
•
A wireless LAN network environment connected with the projector via wired LAN.
•
Compatible projector
•
Compatible iOS device
•
Wireless LAN router* (hereinafter referred to as router), and LAN cable that connects the projector and router.
* A router with DHCP server function.
1
Setup an iOS device for use
2
Connection and setup of a D-ILA projector and a router
3
Confirm connection between the projector and iOS device
4
Install iOS app (exclusive application)
5
Confirm connection status between the projector and iOS app
Compatible projectors
Operating Conditions
Requirements
Procedures for the initial setup
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 A In Settings, switch ON Wi-Fi. B Inside Choose a Network, look for the router in use and select it. C Connection is complete when the Wi-Fi strength indicator appears at the top next to the signal strength indicator. 䡵 Note Refer to the user manual of router in use for how to select a router, and...
3 Confirm to see whether the IP address of the Router on iOS device's Wi-Fi network setup, and default gateway shown on the network setup screen on the projector, are identical. Confirm by checking these A Install iOS app * Please refer to the support page on our website prior to installing the iOS ...
4 Refer to the following to confirm the connection status. Connection status can be found at the top right of the app interface. Color of the indicator changes to notify the projector status to the user. A Connection is made between the projector and remote (iOS device) B Connection is deactivated b...
