Page 2 - Safety Precautions; IMPORTANT INFORMATION; IMPORTANT SAFEGUARDS
1 2 Getting Started Safety Precautions IMPORTANT INFORMATION About the installation place Do not install the projector in a place that cannot support its weight securely. If the installation place is not sturdy enough, the projector could fall or overturn, possibly causing personal injury. IMPORTANT...
Page 4 - POWER CONNECTION
4 Safety Precautions (Continued) 1 Getting Started POWER CONNECTION Use only the following power cord. Power cord WARNING: Do not cut off the main plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obt...
Page 6 - Main Features
6 Main Features Supports Multiple Digital Devices z Comes with a dual HDMI terminal that allows digital transmission of high definition signals. ( p P14 ) DLA-RS1_EN.book Page 6 Wednesday, January 24, 2007 9:23 AM
Page 7 - Beautiful Images on Big Screen
7 Getting Started Preparation B asic Operation S ettings Troubleshooting O thers Beautiful Images on Big Screen z Enjoy smooth and high resolution video images with no visible grid, brought about by full high definition resolution of 1920 c 1080 pixels. ( p P20 ) Perfect for Any Location z Comes wit...
Page 8 - Contents
8 1 Getting Started Getting Started Safety Precautions................................................2Main Features .....................................................6Contents..............................................................8How to Read this Manual/ Accessories/Optional Accessories ...
Page 9 - About this Manual; Check the Accessories
9 ENGLISH Getting Started Preparation B asic Operation S ettings Troubleshooting O thers How to Read this Manual/Accessories/Optional Accessories z Instruction manual, warranty card and other printed material are also included. Please check with your authorized dealer for details. z Replacement Lamp...
Page 10 - Controls and Features
1 10 Getting Started Controls and Features Rear Side/Top Surface Exhaust Vent To adjust the size of the image( p P21 ) To adjust the focus( p P21 ) Lamp Cover ( p P38 ) To connect the power cord ( p P20 ) Remote Sensor ( p P13 ) Front Side/Left Side Remote Sensor( p P13 ) Air inlets Lens Cap z T...
Page 13 - How to Use the Remote Control; Loading Batteries
13 ENGLISH Getting Started Preparation B asic Operation S ettings Troubleshooting O thers How to Use the Remote Control z If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries. Insert the batt...
Page 14 - Selecting Connecting Devices
2 Preparation 14 Selecting Connecting Devices z Do not turn on the power until connection is complete. z The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be connected. z For audio output, connect the device to an amplifier. ...
Page 15 - Connecting; Connecting via Video Cable
15 Getting Started Preparation Basic Operation S ettings Troubleshooting O thers ENGLISH Connecting Connecting via Video Cable Connecting via S-video Cable Video cable (sold separately) VCR and camcorder Video output To video input terminal This unit S-video output S-video cable (sold separately) To...
Page 16 - Connecting via HDMI Cable Or HDMI-DVI Conversion Cable
16 Connecting (Continued) 2 Preparation z Set A COMP B in the setting menu to A Y Pb/Cb Pr/Cr B . ( p P27 - P ) Connecting via HDMI Cable Or HDMI-DVI Conversion Cable Connecting via Component Video Cable HDMI output terminal HDMI cable (sold separately) DVD recorder To HDMI 1 or HDMI 2 input termina...
Page 17 - Connecting via SCART-RCA Cable
17 Getting Started Preparation Basic Operation S ettings Troubleshooting O thers ENGLISH z Set A COMP B in the setting menu to A SCART B . ( p P27 - P ) z Set A COMP B in the setting menu to A RGB B . ( p P27 - P ) z For information on compatible input signals, see A Specifications B . ( p P48 ) Con...
Page 18 - Installing the Projector and Screen; Install the projector and screen
2 Preparation 18 Installing the Projector and Screen Install this unit and the screen. Place this unit and the screen perpendicular to each other.Failing to do so may give rise to trapezoidal distortion of the projected image. A Install the projector and screen Left/Right position * 0 % up/down po...
Page 19 - Adjust such that the projected image is in the center of the screen; Screen Size and Projection Distance
19 Getting Started Preparation Basic Operation S ettings Troubleshooting O thers ENGLISH B Adjust such that the projected image is in the center of the screen z It may be necessary to set A Pixel Adjust B in the setting menu after adjusting the image position. ( p P26 - J ) Determine the distance fr...
Page 20 - Projecting Image; Insert the power plug to the power outlet; Select input mode; Adjust the position of the projection screen
20 3 Basic Operation Projecting Image Preparation z Remove the lens cap. A Insert the power plug to the power outlet B Turn on the power C Project the image a Select input mode b Play back the selected device D Adjust the position of the projection screen This section describes the basic operations ...
Page 21 - Adjust the focus
21 Preparation Basic Operation Settings Troubleshooting O thers Getting Started ENGLISH E Adjust the image size (zoom) F Adjust the focus G Turn off the power Hold and rotate the tab z The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only af...
Page 22 - Convenient Features during Projection; Project the image; Setting the Screen Size; Masking the Surrounding Area of an Image
22 3 Basic Operation Convenient Features during Projection The projected image can be set to a most appropriate screen size (aspect ratio). z The screen size can also be set from A Aspect B of the setting menu. ( p P28 - R ) z When high definition images are input, the screen size is fixed at A 16:9...
Page 23 - Mask the image; Display the setting menu; To end
23 Preparation Basic Operation Settings Troubleshooting O thers Getting Started ENGLISH B Mask the image a Display the setting menu b Select A Setup B g A Mask B c Set a mask value C To end z Masking is available only when high definition images are input. MEMO Setup Image Video Install. Func. Info....
Page 24 - Setting Menu; Procedures for Menu Operation
24 4 Settings Setting Menu Example: When A Aspect B is changed from A 4:3 B to A 16:9 B A Display the setting menu B Select “ Video ” g “ Aspect ” C Set to “ 16:9 ” D To end Projected images can be adjusted to a desired view by changing the default settings. Procedures for Menu Operation Setup Image...
Page 32 - Customizing Projected Images; Select the image profile; Select; Other items can also be adjusted; Changing the Default Image Profile Values
32 4 Settings Customizing Projected Images A Contrast B , A Brightness B , A Color B , A Sharpness B , A DNR B , A Color Temp. B , A Gamma B and A Offset B are registered in the image profile. A Select the image profile B Adjust image quality Example: To adjust A Contrast B a Select A Image B g A Im...
Page 33 - Registering User-defined Image Profiles
33 Preparation B asic Operation Settings Troubleshootin g O thers Getting Started ENGLISH A Select the image profile B Adjust image quality C Register the image profile a Select A Setup B g A Profile Memory B b Register the setting D To end Registering User-defined Image Profiles z See A Changing th...
Page 34 - Troubleshooting
5 34 Troubleshooting Troubleshooting Before sending the unit to your authorized dealer for repair, check the following points. The following situations are not malfunctions. You do not need to worry under the following situations if there is no abnormality on the screen. z Part of the top surface ...
Page 35 - Troubleshootin
35 Getting Started P reparation B asic Operation S ettings Troubleshootin g Othe rs ENGLISH Video image is fuzzy Is the focus correctly adjusted? Adjust accordingly using the focus adjustment ring. p P21 Is the unit placed too near or too far away from the screen? Set the unit at a correct distance ...
Page 37 - About Warning Indicators; Actions to Be Taken for Warning Mode
37 Getting Started P reparation B asic Operation S ettings Troubleshootin g Othe rs ENGLISH About Warning Indicators The accumulated lamp time or warning mode of this unit is displayed by the indicators.For information on indicator display during normal operation, see A Controls and Features B ( p P...
Page 38 - Replacing the Lamp; Remove the lamp cover; Procedure for Lamp Replacement
38 5 Troubleshooting Replacing the Lamp A Remove the lamp cover B Loosen the screws on the lamp unit C Pull out the lamp unit The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit. z When the lamp replacement time approaches, a message is displayed on t...
Page 39 - Install the new lamp unit
39 Getting Started P reparation B asic Operation S ettings Troubleshootin g Othe rs ENGLISH D Install the new lamp unit E Tighten the screws of the lamp unit F Attach the lamp cover z Fasten the screws with a + screwdriver. z Insert the top part (with 2 claws) of the lamp cover into the unit. z Fast...
Page 40 - Resetting Lamp Time
40 Replacing the Lamp (Continued) 5 Troubleshooting After installing a new lamp unit, reset the lamp time. A Insert the power plug to the power outlet B Reset lamp time Resetting Lamp Time z The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3 seconds. After that, the unit switche...
Page 41 - Cleaning and Replacing the Filter; Remove the inner filter
41 Getting Started P reparation B asic Operation S ettings Troubleshootin g Othe rs ENGLISH Cleaning and Replacing the Filter A Remove the inner filter B Clean the filter C Reinstall the inner filter Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur. z Was...
Page 42 - RS-232C Specifications
6 42 Others RS-232C Interface Control of this unit via a computer is possible by connecting the computer to this unit with a RS-232C cross cable (D-Sub 9 pin). The command between this unit and the computer consists of A Header B , A Unit ID B , A Command B , A Data B and A End B . z Header (1 byte)...
Page 45 - RS-232C Communication Examples
45 Getting Started P reparation B asic Operation S ettings Troubleshooting Othe rs ENGLISH This section shows the communication examples of RS-232C. Operating command Reference command RS-232C Communication Examples Type Command Description Connection check PC This unit: 21 89 01 00 00 0A This u...
Page 46 - Copyright and Caution; About Trademarks and Copyright
6 46 Others Copyright and Caution z HDMI, HDMI logo and high definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LCC. z This product uses Ricoh TrueType fonts manufactured and sold by Ricoh Co., Ltd. D-ILA Device Characteristics Do not project still pictures or ...
Page 47 - Precautions for Mounting; Mounting this Unit
47 Getting Started P reparation B asic Operation S ettings Troubleshooting Othe rs ENGLISH Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention during emergencies including earthquakes. When mounting this unit on a pedestal or ceiling, rem...
Page 48 - Specifications
6 48 Others Specifications 1 D-ILA is the abbreviation for Direct drive Image Light Amplifer. 2 D-ILA devices are manufactured using extremely high-precision technology. Pixel effectiveness is 99.99 %. Only 0.01 % or less of the pixels are either missing or would remain permanently lit up. 3 HDCP is...
Page 49 - Dimensions
49 Getting Started P reparation B asic Operation S ettings Troubleshooting Othe rs ENGLISH (Unit: mm) Dimensions Center of Lens Front Left Side Top Surface Bottom Surface DLA-RS1_EN.book Page 49 Wednesday, January 24, 2007 9:23 AM
Page 50 - Memo
6 50 Others Memo DLA-RS1_EN.book Page 50 Wednesday, January 24, 2007 9:23 AM
