JVC AV-29VT34 - Manual - manualsarea.com

Page 2 - Thank you for buying this JVC color television.

2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV.2 Avoid damaging th...

Page 3 - Knowing your TV’s features; Confirm your TV’s functions; Main features

3 Knowing your TV’s features 3 2 1 Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV.Please see the chart below and check the functions that are equipped for your TV’s model number. Themodel number is indicated at the rear of your TV. When...

Page 4 - Remote control buttons and basic functions

4 Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME -/+ Adjust the volume level. 6 T...

Page 5 - Remote control buttons and basic functions (continued); How to operate menus and menus locations

5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual,location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus.* To exit the menu, the on screen display will show BACK indicat...

Page 6 - TV buttons and functions; Front of the TV

6 TV buttons and functions The illustrations shown below is for AV-29VT34 andAV-21YT14 only, which are used for explanationpurpose.Your TV may not look exactly the same as illustrated. IN (VIDEO-3) V R MENU OK L/MONO CHANNEL VOLUME TV/VIDEO EXIT POWER ! 9 8 7 6 5 2 3 4 1 Front of the TV AV-29VT34 Re...

Page 7 - Setting up your TV; CAUTION

7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCRand the aerial jack on the TV with the aerial cable. Then connect theoutput jacks of your VCR and the VIDEO-1 input jacks of the TVwith the video cable (or S-VIDEO cable if available) and audiocables. Fo...

Page 9 - COLOR SYSTEM; To operate this function with a menu:; PICTURE MODE; *TINT can only be adjusted in NTSC system.; Basic setting for picture

9 COLOR SYSTEM You can select the appropriate color system when the picture isnot clear or no color appears.Press the COLOR SYSTEM button to select a setting. In TV mode: NTSC 3.58 MHz (Fixed). In VIDEO mode: To operate this function with a menu: For the color system in each country or region, see t...

Page 10 - Adjusting the picture – USER; Select the USER in PICTURE MODE under PICTURE menu.; PICTURE BOOSTER; WHITE BALANCE

10 MENU PICTURE menu PICTURE FEATURES menu PICTURE BOOSTER ❇ Adjusting the picture – USER You can adjust the desired picture setting when selecting USERin PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjustthe setting. PICTURE...

Page 11 - Correcting the Slanting Picture (PICTURE TILT); The following display appears.; BLUE BACK; Advanced setting for picture

11 AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness ofyour room.Press the ECO button to select the desired mode. 1 Mild contrast (recommended). 2 Even contrast. OFF Cancel the function. To operate this function with a menu: You can display the graphic of AI ECO SENSO...

Page 12 - Basic setting for sound; BALANCE; You can enjoy the emphatic low and high frequency levels.; SOUND MODE

12 Basic setting for sound BALANCE You can adjust the volume balance between the left and rightspeakers.Select the BALANCE in SOUND menu, then adjust the setting. SOUND TURBO You can enjoy the emphatic low and high frequency levels. Press the SOUND TURBO to select ON or OFF.To operate this function ...

Page 13 - Advanced setting for sound

13 CINEMA SURROUND You can enjoy an enhanced sound for wider audience.Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect. MONO Listen to mono sound with stereo effect...

Page 14 - To register the favorite channel; Favorite channel and video setting; To adjust the video setting (VIDEO SETTING)

14 To register the favorite channel You can register and recall 4 favorite channels by using the colorbuttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (CH02-CH69, CC01-CC125)you desired to register. 2 Press and hold a color button for 3 seconds or more.“FAVORITE CHANNEL ■ PROGRA...

Page 15 - Press the; Customized setting; CHILD LOCK

15 VNR You can reduce the noise.Select the VNR in the PICTURE FEATURES menu underPICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select...

Page 17 - TV channel presetting

17 To register the TV channels automatically You can register the TV channels into the TV’s channel listautomatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. 3 Press the 5 / ∞ button to select AIR or CABLE, then press the MENU/OK button.AUTO PROGRAM functio...

Page 18 - Before connecting; • Read the manuals provided with the devices for the proper; Connecting to front video input terminal; Additional preparation

18 The illustrations shown in this section are for AV-29VT34 and AV-21YT14 only, which are used for explanation purpose. Your TVmay not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including...

Page 19 - Attaching the Twin Port Bass Blaster Unit; • Do not move the TV with the Twin Port Blaster Unit mounted

19 2 Firmly insert the Twin Port Bass Blaster Unit connector into theBASS SPEAKER OUT terminal. VIDEO -1 INPUT OUTPUT COMPONENT (VIDEO-2) INPUT BASS SPEAKER OUT R C R V MONO L / V Y / V L MONO L / C B S OVER R R Twin PortBass BlasterUnit 1 Place the unit on top of the TV making sure that the mountin...

Page 20 - Troubleshooting

20 Troubleshooting If a problem occurs when you are using the TV, check the belowtroubleshooting guide before calling for repair. • Deactivate the BLUE BACK function if it is turned on. • Check the aerial cable and its connection with the TV. • Interference occurs caused by other devices such as an ...

Page 21 - Specifications

21 TV RF systems M Color systems TV mode: NTSC 3.58 MHzVIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: S-video input (E...

Page 22 - MEMO

JVC AV-29VT34 - Manual

Table of Contents:

Summary

Other JVC Models