JL Audio XD700/5 - Manual
JL Audio XD700/5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – PRODUCT DESCRIPTION; The XD700/5 can be operated with a wide; TYPICAL INSTALLATION SEQUENCE; The following represents the sequence
- Page 6 – INPUT SECTION
- Page 10 – When a pair of the XD700/5’s main channels; SUBWOOFER OUTPUTS; The XD700/5’s single subwoofer channel is; You will notice that there are two “+” positive
- Page 11 – STATUS LED / PROTECTION CIRCUITRY; There is a single multi-color LED on the top; SERVICING YOUR JL AUDIO AMPLIFIER; If your amplifier fails or malfunctions, please
- Page 12 – SYSTEM CONFIGURATIONS; Crossover Setup for Bi-Amplified System; Mode” switch and select an appropriate “Filter; Crossover Setup for Tri-Amplified System; “Filter Freq.” setting. The “24dB” setting engages
- Page 14 – Following the directions below will allow the; Necessary Equipment; amplifier’s speaker output connectors.; not recommended
- Page 15 – Rated Power at 14.4V with less than; Detent Panel Actual
- Page 16 – contact with the input jacks on the amplifier.; APPENDIX D: TROUBLESHOOTING
- Page 20 – If you need service on your JL AUDIO product:; (do not send product for repair to this address); International Warranties:; by that country’s distributor and not by JL Audio, Inc.
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
OWNER’S MANUAL
700W 5-Channel Amplifier with 2-Way / 3-Way Crossover
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 | JL Audio - XD700/5 Owner’s Manual PRODUCT DESCRIPTION The JL Audio XD700/5 is a five-channel, system amplifier utilizing JL Audio NexD™ ultra-high speed switching technology for its four main channels and NexD™ high-speed switching for its subwoofer channel. The NexD™ technologies deliver outsta...
6 | JL Audio - XD700/5 Owner’s Manual TURN-ON LEAD The XD700/5 uses a conventional +12V remote turn-on lead, typically controlled by the source unit's remote turn-on output. The amplifier will turn on when +12V is present at its “Remote” input and turn off when +12V is switched off. If a source unit...
10 | JL Audio - XD700/5 Owner’s Manual When a pair of the XD700/5’s main channels are bridged, they will deliver 200W x 1 into a 4 ohm load or 150W x 1 into an 8 ohm load. Operating a pair of bridged channels into a load lower than 4 ohms is not recommended. A bridged pair of channels requires that ...
