JL Audio XD600/6 - Manual
JL Audio XD600/6 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – ENGLISH; Planning Your installation
- Page 5 – Power connections
- Page 6 – The XD600/6 uses a conventional +12V remote; Remote
- Page 7 – inPut section
- Page 8 – Filter controls
- Page 9 – With the addition of the optional Remote; “Remote Level Mode” Switch:; This switch; “All”; In the “5&6” position, only the level of
- Page 11 – status led / Protection circuitrY
- Page 12 – sYstem conFigurations
- Page 13 – Crossover Setup for Bi-Amplified System
- Page 15 – rated Power at 14.4V with less than; “Filter Freq”
- Page 16 – to make sure there is +12V at the; “my amplifier’s output fluctuates when i tap on it or hit a bump.”
- Page 17 – “my amplifier shuts off once in a while, usually at higher volumes.”; to ensure that the speaker wires are making a good
- Page 20 – if you need service on your Jl audio product:; (do not send product for repair to this address); international warranties:; by that country’s distributor and not by JL Audio, Inc.
- Page 21 – benutZerHandbucH; Vielen Dank für den Kauf eines JL Audio Verstärkers.
- Page 23 – Planung der installation
- Page 25 – stromanscHlÜsse
- Page 26 – Ausreichend sind jedoch nur 1.5mm; “Remote”
- Page 27 – VerstÄrkereingÄnge
- Page 29 – Dämpfer
- Page 30 – lautsPrecHerausgÄnge
- Page 31 – statusanZeige / scHutZscHaltung
- Page 32 – sYstem-konFigurationen; Beachten Sie dazu folgende Optionen:
- Page 35 – raster- regler- aktuelle
- Page 37 – Anschlussblöcken befestigt sind.
- Page 38 – installationsnotZiZen:
- Page 39 – Jl audio Vertrieb für deutschland:
- Page 40 – Printed in China
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
owner’s manual
600W 3/4/5/6 Channel Amplifier
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 ENGLISH Planning Your installation It is important that you take the time to read this manual and that you plan out your installation carefully. The following are some considerations that you must take into account when planning your installation. cooling efficiency considerations: The outer shell...
5 ENGLISH Power connections Before installing the amplifier, disconnect the negative (ground) wire from the vehicle’s battery. This will prevent accidental damage to the system, the vehicle and your body during installation. The XD600/6’s “ +12 VDC ” and “ Ground ” connections are designed to accept...
6 | JL Audio - XD600/6 Owner’s Manual turn-on lead The XD600/6 uses a conventional +12V remote turn-on lead, typically controlled by the source unit's remote turn-on output. The amplifier will turn on when +12V is present at its “ Remote ” input and turn off when +12V is switched off. If a source un...
