Page 3 - CONTENTS
i CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9412 Mobile Multimedia Receiver for maximum enjoymen...
Page 4 - ii
Page 5 - PREPARATION; Features
1 VM9412 PREPARATION Congratulations on your purchase of the Jensen VM9412 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9412 installed by a reputable installation shop. Features DVD • Aspect Ratio - ...
Page 6 - Optional Equipment; Rear Camera; Optional Accessories; WARNING! Never disassemble or adjust the unit.
2 VM9412 Optional Equipment • NAV101 The VM9412 is "navigation ready." Before accessing any navigation features, you must purchase and install the NAV101 module. All installation and operating instructions will be included with the NAV101 navigation module.Once the NAV101 is connected and op...
Page 7 - WIRING DIAGRAM
3 VM9412 Antenna Jack Harness Cord ACC Auto antenna control (connect to antennacontrol lead & power supply of antennaamplifier) External power amplifier control GND BATT ACC ANT.CONT P.CONT REAR L FRONT L FRONT R REAR R PINK BLACK BLUE BLUE/WHITE WHITE/BLACK - GREEN/BLACK - YELLOW YELLOW RED WHI...
Page 8 - jLink iPod Cable; Head; MEDIALINK AND SATELLITE CONNECTIONS
4 VM9412 * ** jLink iPod Cable (Sold Separately) iPod Nano iPod Mini iPod iPod Video S AT R a d i o S AT L S AT R T o Head Unit VIDEO LEFT RIGHT 3.5mm - Audio MediaLink MEDIALINK AND SATELLITE CONNECTIONS *SAT Cable Kit: JXMC or XMDJEN100 (sold separately) **XM or Sirius satellite tuner (sold separa...
Page 9 - INSTALLATION; CAUTION! Be careful not to damage the car wiring.; Wiring; PREPARE RADIO; FINAL INSTALLATION; FINAL ISO-DIN INSTALLATION
5 VM9412 INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the half-sleeve from the radio. 2. Install the half-sleeve.a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve int...
Page 10 - Press the; SETUP; touch the; RATINGS; Enter a new 6-digit password and press; ENTER
6 VM9412 ANTI-THEFT FEATURE The VM9412 is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. The default user password is 012345 (6 digits). To change the anti-theft and RATINGS protection password, perform the following steps: 1. Press the SETUP button...
Page 11 - CONTROLS AND INDICATORS; Button Operation; IR Remote Control Receiver
7 VM9412 CONTROLS AND INDICATORS Button Operation 1. OPEN/CLOSE Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. DISP Press to cycle through information available on the LCD screen. 3. AS Press to automatically store t...
Page 12 - Press and hold
8 VM9412 7 15 14 13 20 16 8 6 18 19 9 VM9412 s Audio Enter SRC STOP REAR SCN RPT RDM PTY MUTE BAND AS DISP OPEN BAND AS DISP OPEN BAND CLOSE AS DISP PICTURE ANGLE / TILT Multimedia Receiver WIDE WIDE 17 1 2 4 3 5 Pres 22 21 12 10 11 24 23 25 CONTROLS AND INDICATORS 13.Pause/Play/Enter Press to pause...
Page 13 - REMOTE CONTROL
9 VM9412 REMOTE CONTROL The VM9412 Remote controls both the front and rear zones. To switch from front to rear zone, move the F/R switch (32) located on the right side of the controller. 29 3 4 5 9 6 7 26 27 15 16 34 33 19 32 23 24 31 30 8 35 1 2 10 13 28 25 11 12 14 20 18 17 22 21 NOTE: Your remote...
Page 16 - USING THE TFT MONITOR; Open TFT Monitor; Reverse Driving Use
12 VM9412 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN button (1) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button (1) on the...
Page 17 - Parameter Adjustment Procedure; Parking Brake; Parking Brake Inhibit; Monitor Movement Mechanism
13 VM9412 Parameter Adjustment Procedure 1. Enter Picture Quality Setting Mode: Press the PIC button (24) on the remote control or the WIDE/PICTURE button (23) on the monitor. 2. Select Item to Set: Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”. 3. Set Parameters: Use the left/ri...
Page 18 - OPERATING INSTRUCTIONS; DISC; SOURCE MENU; OFF; Function
14 VM9412 OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (6) on the unit (or the /POWER button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the ...
Page 20 - SETUP MENU; Accessing Menu Items; General Sub-menu Features; AUDIO; RDS Sub-menu Features; RADIO
16 VM9412 SETUP MENU To access system settings, press the SETUP button (31) on the remote control or touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue. Accessing Menu Items Touch the sub-menu name or use the joystick to select a sub-menu (La...
Page 21 - Exiting the System Setup Menu; To exit setup mode and resume normal playback, press the; button (31) on the remote control or touch the; BACK; button on the screen.
17 VM9412 Rating Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is set at the highest setting (with no restrictions). The parental lock is released only by entering the correct ...
Page 22 - TUNER OPERATION; Storing a Station; Clear; E x i t
18 VM9412 TUNER OPERATION Tuner TFT Display 1. Current radio band indicator 2. Radio frequency indicator 3. Clock 4. Stereo broadcasting indicator 5. Strong Local signal broadcasting indicator 6. Preset radio stations: Touch to recall preset stations 7. RDS Information: PS (Program Service), PTY (Pr...
Page 23 - button (3) on the control panel or touch; The new stations replace stations already stored in that band.; PS; button to access; LOC; button again to turn Local
19 VM9412 close the menu). The preset number and station appears highlighted. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. Auto Store (AS) To select six strong stations and store them in the current band: 1. Sel...
Page 24 - SATELLITE RADIO OPERATION; SAT
20 VM9412 SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels wi...
Page 25 - Category Guide Mode
21 VM9412 • While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. • Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. Each page contains six channels to select from. • Press the on-scree...
Page 26 - DVD/VCD VIDEO OPERATION; press and hold
22 VM9412 DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applic...
Page 27 - Exit
23 VM9412 Direct Chapter / Track Selection Remote Control Direct Entry During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly. Touch Screen Direct Entry To select a title, chapter/track, or specific playback time directly, touch the butt...
Page 28 - General Disc Information; Table 5: Disc Properties; Table 6: Disc Symbols
24 VM9412 General Disc Information Table 5: Disc Properties Symb ol 12cm Disc Properties Max Play Time Single side single layer (DVD-5)Single side double layer (DVD-9)Double side single layer (DVD-10)Double side double layer (DVD-18) (MPEG 2 Method)133 minutes242 minutes266 minutes484 minutes Single...
Page 29 - DVD/CD AUDIO OPERATION; CD Player User Interface; CD
25 VM9412 DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9412 will play music or other audio files from the following disc media: • CD-DA • CD-R/RW •...
Page 30 - MP3 Format Compatibility; MP3/iPod User Interface
26 VM9412 MP3/WMA/iPod OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. MP3/WMA Media and File Requirements This player allows you to play back MP3 and WMA files recorde...
Page 32 - Direct Track/File Entry; Enter
28 VM9412 Direct Track/File Entry To select a track/file directly, touch the button on screen control to display the direct entry menu. Enter the desired track/file using the on-screen number pad. Press the Enter button to tune to the selected station. To exit the screen without changing the station...
Page 33 - TROUBLESHOOTING; Table 7: Troubleshooting; Problem; GENERAL
29 VM9412 TROUBLESHOOTING Table 7: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right cor...
Page 34 - Error Messages; SAT RADIO
30 VM9412 Error Messages Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating l...
Page 35 - Care and Maintenance; Do not get water or cleaning fluids on the unit.
31 VM9412 Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature ...
Page 36 - SPECIFICATIONS; *Specifications subject to change without notice.
32 VM9412 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD +/- R/RW (Single and Dual Layer) and CD-R / RWCompatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak picture CD (JPEG). Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 2...
Page 37 - Limited Warranty; DO NOT RETURN THIS PRODUCT TO THE STORE; What is not covered?
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800-323-4815 wi...
