Page 2 - ii; CONTENTS
ii Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9410 Mobile Multimedia AM/FM/DVD Receiver for maximum enjoym...
Page 3 - PREPARATION; Features
VM9410 1 PREPARATION Congratulations on your purchase of the Jensen VM9410 Mobile Multimedia AM/FM/DVD Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9410 installed by a reputable installation shop. Features 1. 1 DIN Si...
Page 4 - INSTALLATION; CAUTION! Be careful not to damage the car wiring.; Wiring; PREPARE RADIO; FINAL INSTALLATION; FINAL ISO-DIN INSTALLATION
VM9410 2 INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the half-sleeve from the radio. 2. Remove the transport screws. 3. Install the half-sleeve.a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (only use the supplied scre...
Page 5 - ACC; WIRING DIAGRAM
VM9410 3 Antenna Jack ACC Auto antenna control(connect to antenna control lead & power supply of antenna amplifier) External power amplifier control GND CENTER SUB.W SURROUND REAR R BATT ACC REVERSE + ANT.CONT P.CONT PRK SW FRONT L FRONT R SURROUND REAR L REAR L FRONT L FRONT R AUX IN/L AUX IN/R...
Page 6 - CONTROLS AND INDICATORS; Button Operation
VM9410 4 CONTROLS AND INDICATORS Button Operation 1. OPEN Press the OPEN button (1) to activate the automatic mechanical system and move the TFT monitor into viewing position. 2. WIDE/PICTURE Press the WIDE/PICTURE button (2) to adjust the display aspect of the picture to one of three settings: Wide...
Page 7 - IR Remote Control Receiver
VM9410 5 CONTROLS AND INDICATORS 10. 3/SCN DVD Mode: Press once to start scan playback. TUNER Mode: Press once to play preset radio station channel 3. Press and hold to store the current radio station in preset channel 3. 11. 4/REP DVD Mode: Press once to start repeat playback. TUNER Mode: Press onc...
Page 8 - LCD Display/Indicators
VM9410 6 CONTROLS AND INDICATORS LCD Display/Indicators 1. Disc Indicator Illuminated when disc is loaded 2. DVD Playback Indicators (SCN/RPT/RDM/ALL) The following DVD playback indicators become Illuminated when the corresponding function is active: • SCN: scan playback • RPT: repeat playback • RDM...
Page 9 - FRONT ZONE REMOTE CONTROL
VM9410 7 FRONT ZONE REMOTE CONTROL Table 1: Front Zone Remote Control Functions Button Function Name Ref # DVD VCD CDC TUNER CD/MP3 MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE 3 Tog...
Page 11 - REAR ZONE REMOTE CONTROL
VM9410 9 REAR ZONE REMOTE CONTROL Table 2: Rear Zone Remote Control Functions Button Function Name Ref # DVD VCD MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE 3 Toggles on/off audio o...
Page 12 - USING THE TFT MONITOR
VM9410 10 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN button (1) on the front panel or press the ( ) button (25) of the front zone remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button...
Page 13 - OPERATING INSTRUCTIONS; Press and hold
VM9410 11 OPERATING INSTRUCTIONS Power On / Off Press the /MUTE button (1) to turn the unit on. The buttons on the front of the unit light up and “WELCOME” appears briefly in the LCD panel (17), followed by the current mode status. If the TFT screen is open, only the current mode status is displayed...
Page 14 - SYSTEM SETUP MENU; General Setup Menu
VM9410 12 SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL SETUP” are available for adjustment. Setup can be performed by pressing the dedicated button on the remote control or on the front panel. For system settings, press the SYS SETUP button (31) on the remote control to enter ...
Page 15 - Adjusting a Feature; Exiting the System Setup Menu; ASP Config
VM9410 13 Adjusting a Feature 1. Enter the option field for the feature you want to adjust by pressing the button (18) on the remote or by pressing the ENTER (joystick) button (20) on the unit. A submenu appears in a second row with the selected option highlighted in light blue. 2. Select a new valu...
Page 16 - TUNER OPERATION; Using Preset Scan; press and hold
VM9410 14 TUNER OPERATION Tuner TFT Display 1. Current Radio Band Indicator 2. Radio Frequency Indicator 3. Clock 4. Stereo Broadcasting Indicator 5. Strong Local Signal Broadcasting Indicator 6. Preset Radio Stations 7. Front Zone Playing Mode 8. Rear Zone Playing Mode 9. User Defined Equalizer Lev...
Page 17 - DVD PLAYER OPERATION
VM9410 15 DVD PLAYER OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking break is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicabl...
Page 18 - top
VM9410 16 playback. Depending upon the channel selected and your speaker setup, the audio output varies according to the following table. NOTE: The information in the above table is valid only when the setup values for “Front Speaker”, “Center Speaker”, and “Surround Speaker” are set to “low”. Goto ...
Page 19 - General Disc Information
VM9410 17 • Rear: AUX IN – “AUX IN” is the current playing source for the rear zone.“Surround” is the current playback audio encoding system.“DSP” indicates Digital Signal Processing. VCD Playback Information The following information is displayed at the top of the screen during VCD playback: • VCD2...
Page 20 - DVD SETUP MENU; Accessing the DVD Setup Screen; Accessing a Menu; LANGUAGE Menu; L A N G U A G E
VM9410 18 DVD SETUP MENU In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO”, “SURR SETUP”, and “RATING” (parental lock) are available for setup. This operation can be performed using the remote control or joystick controls. Accessing the DVD Setup Screen For system settings, press the DVD SETUP butto...
Page 21 - SURROUND SETUP Menu; To change speaker settings for 2-channel mode, use the; SURROUND SETUP
VM9410 19 SURROUND SETUP Menu To change speaker settings for 2-channel mode, use the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick to select “Stereo”. To change speaker settings for 6-channel mode, select “Multi-CH”. After selecting 2 or 6-channel mode, use the...
Page 22 - CD PLAYER/CHANGER OPERATION; Random Play; CD Changer Operation
VM9410 20 CD PLAYER/CHANGER OPERATION Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD, CD Changer and MP3 operation. Please see the DVD Player Operation section for information about these topics...
Page 23 - TROUBLESHOOTING; Table 18: Troubleshooting
VM9410 21 TROUBLESHOOTING Table 18: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right co...
Page 24 - Do not get water or cleaning fluids on the unit.
VM9410 22 Error Messages Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If t...
Page 25 - SPECIFICATIONS; CEA Power Ratings; as source reference
VM9410 23 SPECIFICATIONS CEA Power Ratings Power Output : 13 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio : 70dBA below reference. (Reference: 1 watt, 4-ohms) Dynamic Power : 64 watts into 4-ohms, all channels driven Frequency Response : 20Hz to 20kHz, -3dB. Aux input use...
