JBL PSW-D112 - Manual
JBL PSW-D112 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CAUTION; Important Safety Precautions!
- Page 3 – Placement; Hookup
- Page 6 – Operation; Power; Level Control; Video Contour
- Page 8 – Specifications
PSW-D112
simple setup guide
thank you
for choosing JBL. For more
than 50 years, JBL has been involved in every
aspect of music and film recording and reproduc-
tion, from live performances to the recordings you
play in your home, car or office.
We’re confident that the JBL loudspeaker you have
chosen will provide every note of enjoyment that
you expected – and that when you think about pur-
chasing additional audio equipment for your home,
car or office, you will once again choose JBL.
Please take a moment to complete the enclosed
profile card. It enables us to keep you posted on
our latest advancements, and helps us to better
understand our customers and build products that
meet their needs and expectations.
JBL Consumer Products
PSW-D112 11/9/99 11:02 AM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
– 2 – – 2 – 1. Read Instructions. All the safety and operatinginstructions should be read before the product isoperated. 2. Retain Instructions. The safety and operating instruc-tions should be retained forfuture reference. 3. Heed Warnings. All warn- ings on the product and inthe operating instruct...
– 3 – Placement • As a general rule, bass response increases as asubwoofer is placed closerto a wall. Therefore, bassoutput is maximized whenthe subwoofer is placed ina corner. • It is also recommended that the subwoofer bepositioned along the same wall as the frontloudspeakers. Low-frequency sounds...
– 6 – Operation Power When the unit is plugged inand power is on and no signalis received, the LED on thefront of the unit will turn red.When a signal is present, theLED will turn green. Note: Itwill take several minutes forthe LED to turn from green tored after the input signal to the subwoofer is ...
