Page 2 - FRONT SPEAKERS; SPEAKER PLACEMENT
2 INCLUDED Template/paintshield. Removepaint shield(inner rectangle)at perforation. One pair of speakers withgrilles. Template/paintshield. Removepaint shield(inner circle) at perforation. One pair of speakers withgrilles (SP6CII and SP8CII).Model SP6CSII includes onlyone loudspeaker, since it iscap...
Page 3 - MODELS SP5II, SP6II, SP8II AS REAR SPEAKERS; Digital; MODEL SP6CSII
3 WALL WALL 5 – 6 ft. WALL WALL MODELS SP5II, SP6II, SP8II AS REAR SPEAKERS IN-CEILING MODELS SP6CII, SP6CSII, SP8CII Proper placement of thespeakers is an important stepin obtaining the most realisticsoundstage possible. Theserecommendations are for theoptimum placement of the loud-speakers. Use th...
Page 4 - TOOLS NEEDED; INSTALLATION; CONNECTION TIPS; SPEAKER CONNECTIONS
4 Phillips #2 screwdriver Measuring tape Utility knife Pencil Carpenter’s level Awl TOOLS NEEDED The SoundPoint ® Series in-wall speakers were designed to beeasily installed. However, if youare unsure of your ability to prop-erly install these loudspeakers,please contact your dealer or aqualified in...
Page 5 - EXISTING CONSTRUCTION; Remove the inner template,
5 SP5II, SP6II, SP8II EXISTING CONSTRUCTION Remove the grille from thespeaker frame by pulling onthe paper tab. If the tab ismissing, to avoid scratchingthe grille or baffle you mayunfold a paper clip, insert thestraight end through one of theholes in the grille, and gentlypull up. Determine the cor...
Page 6 - Always allow at least
6 SP6CII, SP6CSII, SP8CII EXISTING CONSTRUCTION Remove the grille from thespeaker frame by pulling onthe paper tab. If the tab ismissing, to avoid scratchingthe grille or baffle you mayunfold a paper clip, insert thestraight end through one ofthe holes in the grille, andgently pull up. ≥ 1/2" ≥ ...
Page 7 - NEW CONSTRUCTION; Gently remove the; TROUBLESHOOTING
NEW CONSTRUCTION PAINTING THE SPEAKER FRAME AND GRILLE SoundPoint Series loud-speakers can be painted tomatch any décor. If you wishto change their color, the satinfinish on the grille and framewill function as a primer coat.Before painting, install thepaint shield (inner section oftemplate in the a...
Page 8 - Declaration of Conformity; SP6CSII; SPECIFICATIONS; OWNER’S GUIDE; S O U N D P O I N T
2 Declaration of Conformity We, Harman Consumer Group International 2, route de Tours 72500 Château du Loir France declare in own responsibility that the products described in this owner’s manual are in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Laurent Rault Harman Con...