JBL GT5.0c - Manual
JBL GT5.0c – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – ANGLE MOUNT; Line up tab with slot on bracket
- Page 4 – Typical installation of the GT4.0c and GT5.0c; as shown in Figure 2a.
- Page 5 – Tweeter Output Level
- Page 6 – Installation of the GT4.0c woofer; as shown in Figures 4a and 4b.; Figure 4a
- Page 7 – Installation of the GT6.0c woofer
- Page 8 – Figure 5d; Mounting the GT6.0c woofer in; shown in Figures 5d and 5e.
- Page 9 – Component Placement
- Page 10 – System Design
- Page 11 – Tweeters
- Page 13 – Specifications; Component Systems
GRAND TOURING SERIES
G E N U I N E J B L
A u t o m o t i v e
C o m p o n e n t S y s t e m s
G T 4 .0 c , G T 5 .0 c , G T 6 .0 c O w n e r ’ s M a n u a l
GT4.0c, 5.0c, 6.0c OM 7/16/98 9:54 AM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
03 Component System Parts Your new Component System consists of the GTC04 neodymium magnet tweeter and either a 4", 5-1/4", or 6-1/2" midwoofer. Both the GTC04 and the midwoofer have high-quality passive crossover parts already built into them. Figure 2 is an illustration of the proper w...
04 IN-LINE CROSSOVER(DO NOT CUT OR BYPASS) GTC04 WIRING HARNESS CONNECT TO AMPLIFIER 2 1 Line up tab with slot on bracket Push tweeter into bracket and turn clockwise 2 1 FLUSH MOUNT Midwoofer Terminal Block Connect to Amplifier or head unit Lead from GTC04 tweeter Small 0.11" (-) Terminals Larg...
05 Tweeter Output Level The GTC04 is a very efficient tweeter. If there is a need to lower the tweeter output level, a pair of 4 ohm / 5 watt resistors can be connected in series with the GTC04 as shown in Figure 3. To avoid short circuits, make sure that heat-shrink tubing or electrical tape is use...
