Page 3 - MANUFACTURERS WARRANTY; ONE YEAR LIMITED PARTS & LABOR WARRANTY
ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROMDEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONEYEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DATEOF SHIPMENT FROM THE FACTORY. Jacks...
Page 6 - ii; NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL; TEMPSTAR NB
ii NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL Model: Serial No.: Installation Date: Service Rep. Name: Phone No.: TEMPSTAR NB TEMPSTAR = Electrically heated, high temp, hot water sanitizing, with booster heater, door-type dish-machineTEMPSTAR LT = Electrically heated, low temp, chemical sani...
Page 7 - TABLE OF CONTENTS
Section Description Page I. Specifications Operating Capacities 2 Electrical Requirements 3 Dimensions Tempstar/Tempstar LT/Tempstar NB (Side Mounted Control Box) 4 Dimensions Tempstar/Tempstar LT/Tempstar NB (Top Mounted Control Box) 5 Dimensions Tempstar SDS 6 Table Dimensions 7 II. Installation/O...
Page 8 - Tempstar SDS Dispenser; Electrical Diagram Options; Drain Quench; Jackson Maintenance & Repair Centers; iv
VI.A Electrical Diagrams - Top Mounted Control Boxes Tempstar (UT w/Cycle Switches) 208 - 230V, 50/60 Hz, single/three phase 60 Tempstar (UT w/Cycle Switches) 460V, 60 Hz, three phase 61 Tempstar LT & NB (UT w/Cycle Switches) 208 - 230V, 50/60 Hz, single/three phase 62 Tempstar LT & NB (UT w...
Page 9 - SPECIFICATION INFORMATION
Page 10 - SECTION 1: SPECIFICATION INFORMATION; OPERATING CAPACITIES
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION OPERATING CAPACITIES PERFORMANCE/CAPABILITIES OPERATING CAPACITY: RACKS PER HOUR 57 DISHES PER HOUR 1425 GLASSES PER HOUR 1425 OPERATING CYCLE (SECONDS): MINIMUM (OTHER CYCLE TIM...
Page 12 - ELECTRICAL CONNECTION POINT
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION DIMENSIONS TEMPSTAR/TEMPSTAR LT/NB (SIDE MOUNTED CONTROL BOX) 4 25 1/4” (64.1 cm) 32” (81.3 cm) 17 1/2” (44.5 cm) MACHINE OPENING 10 5/8” (27 cm) 34” (86.4 cm) TABLE HEIGHT 14” (...
Page 13 - LEGEND
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION DIMENSIONS TEMPSTAR/NB/LT/S (TOP MOUNTED CONTROL BOX) 5 25 1/4” (64.1 cm) 32” (81.3 cm) 17 1/2” (44.5 cm) MACHINEOPENING 34” (86.4 cm) TABLE HEIGHT 76” (193 cm) W/ DOOR OPEN 14” ...
Page 14 - DIMENSIONS TEMPSTAR SDS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION DIMENSIONS TEMPSTAR SDS 6 25 1/4” (64.1 cm) 32” (81.3 cm) 74” (188 cm) 17 1/2” (44.5 cm) MACHINEOPENING 7 1/4” (18.4 cm) 34” (86.4 cm) TABLE HEIGHT 76” (193 cm) W/ DOOR OPEN 14” ...
Page 15 - TABLE DIMENSIONS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION TABLE DIMENSIONS 7 TABLE DIMENSIONS CORNER INSTALLATION TABLE DIMENSIONS CONNECTION TO DISHMACHINE TABLE DIMENSIONS STRAIGHT THROUGH INSTALLATION 20 1/2” (52.1 cm) OPENING 25 1/4...
Page 17 - SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS; INSTALLATION INSTRUCTIONS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 9 VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi- cator that there ...
Page 18 - ELECTRICAL POWER CONNECTION:; Ensure that the power switch is in the OFF position and; Power Block
PLUMBING CHECK: Slowly turn on the water supply to the machine after the incoming fill line and the drain line have been installed. Check for any leaks and repair as required. All leaks must be repaired prior to placing the machine in operation. ELECTRICAL POWER CONNECTION: Electrical and grounding ...
Page 20 - DETERGENT CONTROL
Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate.Using detergent in the proper amount can become, in time, a source of substantial savings. A qualified water treatment spe-cialist can tell you what is needed for maximum effic...
Page 21 - FALSE PANEL INSTALLATION; Bottom of side panel.; False panel positioned in unit.; False Panel
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS 13 FALSE PANEL INSTALLATION 1. Remove the rack assembly from the unit.2. False panel will mount inside the dishmachine.3. Position panel in unit on side to be closed.4....
Page 22 - PREVENTATIVE MAINTENANCE
Page 23 - SECTION 3: PREVENTATIVE MAINTENANCE
The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However,this does not mean that some items will not wear out in time. Jackson highly recommends that any maintenance and repairsnot specifically discussed in this manual should be perform...
Page 24 - TROUBLESHOOTING SECTION
Page 25 - SECTION 4: TROUBLESHOOTING; COMMON PROBLEMS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 4: TROUBLESHOOTING COMMON PROBLEMS 17 WARNING: Inspection, testing and repair of electrical equipment should only be performed by a qualifiedservice technician. Many of the tests require that the unit have p...
Page 26 - PSI connected to the machine.
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 4: TROUBLESHOOTING COMMON PROBLEMS 18 WARNING: Inspection, testing and repair of electrical equipment should only be performed by a qualifiedservice technician. Many of the tests require that the unit have p...
Page 27 - PARTS SECTION
Page 28 - SECTION 5: PARTS SECTION; TOP MOUNTED CONTROL BOX ASSEMBLY WITH UNIVERSAL TIMER
10 29 30 6 11 39 40 42 1 35 34 36 6 Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TOP MOUNTED CONTROL BOX ASSEMBLY WITH UNIVERSAL TIMER 20 14 15 18 33
Page 29 - TOP MOUNTED CONTROL BOX ASSEMBLY WITH UNIVERSAL TIMER (CONTINUED); ITEM
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TOP MOUNTED CONTROL BOX ASSEMBLY WITH UNIVERSAL TIMER (CONTINUED) 21 ITEM QTY DESCRIPTION Mfg. No. 1 1 Control Box Weldment 05700-003-30-14 2 1 Timer Bracket 05700-003-02-08 5 2 Locknut, 6-3...
Page 30 - TOP MOUNTED CONTROL BOX ASSEMBLY (MECHANICAL TIMER)
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TOP MOUNTED CONTROL BOX ASSEMBLY (MECHANICAL TIMER) 22 21 20 1 2 3 4 5 6 7 9 8 10 11 12 13 14 19 18 17 16 15
Page 31 - Other components not shown:
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TOP MOUNTED CONTROL BOX ASSEMBLY (MECHANICAL TIMER) (CONTINUED) 23 ITEM QTY DESCRIPTION Mfg. No. 1 1 Control Box Weldment 05700-002-29-76 2 1 Ground Lug 05940-200-76-00 3 1 Terminal Block 05...
Page 32 - SIDE MOUNTED CONTROL BOX ASSEMBLY; CONTROL BOX FRONT COVER
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION SIDE MOUNTED CONTROL BOX ASSEMBLY 24 1 2, 21 3 CONTROL BOX FRONT COVER 4 5 6 7, 8 INNER CONTROL BOX LAYOUT 9, 22 11, 22 10, 22 12, 22 13, 14 12, 22 15, 16 17 18, 23, 24 19 CONTROL BOX BOTTOM...
Page 33 - SIDE MOUNTED CONTROL BOX ASSEMBLY (CONTINUED)
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION SIDE MOUNTED CONTROL BOX ASSEMBLY (CONTINUED) 25 ITEM QTY DESCRIPTION Mfg. No. 1 1 Power Switch 05930-301-21-18 2 1 Cycle Counter 05990-111-47-42 3 1 Normal/Delime Switch 05930-301-46-00 4 1...
Page 34 - SDS SIDE MOUNTED CONTROL BOX ASSEMBLY; Bracket, Side Mount Electrical Box
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION SDS SIDE MOUNTED CONTROL BOX ASSEMBLY 26 Cover, Dielectric Control Panel05700-021-50-89 Bracket, Side Mount Electrical Box 05700-041-65-68 6 14 15 19 20 23 22 11 12 13 10 16 17 18 9 8 7 1 2 ...
Page 35 - SDS SIDE MOUNTED CONTROL BOX ASSEMBLY (CONTINUED)
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION SDS SIDE MOUNTED CONTROL BOX ASSEMBLY (CONTINUED) 27 ITEM QTY DESCRIPTION Mfg. No. 1 1 Control Box Cover Weldment 05700-021-60-43 2 1 Decal, Control Box Cover 09905-021-50-13 3 1 Light, Ambe...
Page 36 - HOOD ASSEMBLY
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION HOOD ASSEMBLY 28 1 2 3, 5 4 6 7 8 9 10 Switch Box Weldment 05700-002-14-34 SDS Switch Box Weldment 05700-002-30-98 Magnetic Reed Switch 05930-003-05-84 ITEM QTY DESCRIPTION Mfg. No. 1 1 Hood...
Page 37 - HOOD ASSEMBLY (BOLTED SINGLE SUPPORT DESIGN); Hood Support
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION HOOD ASSEMBLY (BOLTED SINGLE SUPPORT DESIGN) 29 ITEM QTY DESCRIPTION Mfg. No. 1 1 Hood Weldment (Tempstar/Tempstar LT/Tempstar NB) 05700-002-29-79 1 1 Hood Weldment (Tempstar SDS) 05700-002-...
Page 38 - CANTILEVER ARM/DOOR ASSEMBLIES
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION CANTILEVER ARM/DOOR ASSEMBLIES 30 3 5 2 1 6 9 15, 16 17, 18 19, 11, 12 20 19, 11, 21 22 23, 18 7 8 4 24, 18 14 13 10, 11, 12 3d 3b 3f 3c 3a 3e
Page 40 - TUB ASSEMBLY; Pump Support Bracket Complete Assembly
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TUB ASSEMBLY 32 12 10, 11 2 3 4 7 8 13 14, 11 15 5 9 3 16 6 32 31, 30 22 23 21 24 25 27, 28 37 34 36 35 26 33 1 29 17 16 18 19 20 Pump Support Bracket Complete Assembly 05700-002-00-46 Nut, ...
Page 41 - Items for side-mounted control box not shown:
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TUB ASSEMBLY (CONTINUED) 33 ITEM QTY DESCRIPTION Mfg. No. 1 1 Tub Weldment 05700-002-12-59 2 1 Rack Assembly 05700-002-01-00 3 2 Bulk Head Plug 04730-609-05-00 4 1 See Page Entitled “Wash Mo...
Page 42 - STEAM TUB ASSEMBLY
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION STEAM TUB ASSEMBLY 34 12 10, 11 2 3 4 7 8 13 14, 11, 15 5 9 3 16 6 22, 23 21 24 25 27, 28 24 26 1 29 17 16 18 19 20 Pump Support Bracket Complete Assembly 05700-002-00-46 Nut, 1/4”-20 Serrat...
Page 44 - FRAME ASSEMBLY; Bullet Foot
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION FRAME ASSEMBLY 36 Front Panel05700-002-36-65 Bolt, 1/4”-20 x 1/2” 05305-274-02-00 Locknut, 1/4”-20 S/S Hex with Nylon Insert 05310-374-02-00 Bullet Foot 05340-108-01-03 Frame Weldment05700-0...
Page 45 - RINSE TANK ASSEMBLY; See page entitled; Booster Tank Weldment
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION RINSE TANK ASSEMBLY 37 4 5 9 11 12 2, 3 1 6 10 7, 8 See page entitled “WASH HEATERS/RINSE HEATERS”. ITEM QTY DESCRIPTION Mfg. No. 1 1 Booster Tank Weldment 05700-001-22-02 2 2 Locknut, 10-24...
Page 46 - COIL ASSEMBLY
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION COIL ASSEMBLY 38 Stand C, Steam Coil Support 05700-002-08-52 Steam Coil Weldment 05700-021-41-38 Stand D, Steam Coil Support 05700-002-08-53 Stand B, Steam Coil Support 05700-002-08-51 Adapt...
Page 47 - INCOMING STEAM PLUMBING ASSEMBLIES; /4” NPT Black Iron Pipe
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION INCOMING STEAM PLUMBING ASSEMBLIES 39 Union, 3/4’’ NPT, Black Iron 04730-912-01-01 Elbow, 3/4” 90° Street 04730-011-87-37 Elbow, 3/4” 90° Street 04730-011-87-37 Steam Trap, 3/4” NPT F&T ...
Page 49 - MOTOR & PUMP ASSEMBLY; Impeller Assembly, 60HZ; Other parts not shown.; Pump Casing 60HZ
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION MOTOR & PUMP ASSEMBLY 41 Impeller Assembly, 60HZ 05700-002-81-86 Impeller Assembly, 50HZ 05700-002-41-49 Mechanical Seal, 60HZ05330-002-34-22 Seal, 50HZ05330-002-06-21 Other parts not sh...
Page 51 - TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY; TEMPSTAR INCOMING PLUMBING; Tube Length Chart; Lower Outlet
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY 43 TEMPSTAR INCOMING PLUMBING TEMPSTAR/TEMPSTAR SDS OUTLET PLUMBING 15 4 9 10 16 1 7 3 2 6 5 4 4 8 9 10 11 10 14 13 17 13 9 18 12 12 10 Tu...
Page 52 - See Chart; WPRK KIT OPTION
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY/WPRK KIT OPTION 44 ITEM QTY DESCRIPTION Mfg. No. 1 1 Water Pressure Regulator, 3/4" NPT 06685-011-58-22 2 1 Valve, Ball, 1/4" NPT ...
Page 53 - TEMPSTAR LT & TEMPSTAR NB INCOMING PLUMBING ASSEMBLY
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR LT & TEMPSTAR NB INCOMING PLUMBING ASSEMBLY 45 ITEM QTY DESCRIPTION Mfg. No. 1 1 Vacuum Breaker, 3/4" NPT 04820-002-53-77 2 1 Elbow, Brass, Street, 3/4" NPT 04730-206-04...
Page 54 - TEMPSTAR SDS INCOMING PLUMBING ASSEMBLY
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR SDS INCOMING PLUMBING ASSEMBLY 46 ITEM QTY DESCRIPTION Mfg. No. 1 1 Gauge, Pressure, 0-100 PSI 06685-111-88-34 2 1 Valve, Ball, 1/4" NPT 04810-011-72-67 3 1 Tee, 1/4" x 1/4&...
Page 55 - /4” SOLENOID VALVE & 3/4” NPT VACUUM BREAKER REPAIR PARTS KITS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION 3/4” SOLENOID VALVE & 3/4” NPT VACUUM BREAKER REPAIR PARTS KITS 47 Screw Data Plate Coil & Housing Valve Bonnet Spring06401-003-07-40 Plunger06401-003-07-40 O-Ring06401-003-07-42 Dia...
Page 56 - DETAIL “B”; Rinse Injector Weldment
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION WASH & RINSE ARM/MANIFOLD ASSEMBLIES 13 18 20 11 12 15 14 2, 3, 4 7 16, 8 6, 10 5 9 7 1 DETAIL “B” WASH ARMS & MANIFOLD DETAIL “A” FINAL RINSE ARMS & MANIFOLD 10 10 10 10 5 17 17...
Page 57 - EXPLODED VIEW OF
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION WASH & RINSE ARM/MANIFOLD ASSEMBLIES (CONTINUED) 49 ITEM QTY DESCRIPTION Mfg. No. 1 1 Upper Manifold 05700-031-34-82 2 4 Nut, 3/8"-16 S/S Hex 05310-276-01-00 3 4 Lockwasher,3/8 05311...
Page 58 - TEMPSTAR SDS DISPENSER ASSEMBLY
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR SDS DISPENSER ASSEMBLY 50 1 2 3 4 5 6 7 8 1 See section entitled “Cam Holder Assembly”. 9 10 11 See section entitled “Dispenser Plumbing Assembly” 13 12 See section entitled “Feeder...
Page 59 - TEMPSTAR SDS DISPENSER ASSEMBLY (CONTINUED)
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR SDS DISPENSER ASSEMBLY (CONTINUED) 51 ITEM QTY DESCRIPTION Mfg. No. 1 3 Screw, 6-32 x 3/4" Long 05305-171-07-00 2 1 Lockwasher, #6, External Tooth 05311-271-02-00 3 1 Rinse Cyli...
Page 60 - Plate, Solenoid Valve Mounting
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR SDS DISPENSER ASSEMBLY (CONTINUED) 52 26 27 28 29 FEEDER PUMP 30 31 32 33 34 35 36 37 & 38 37 & 38 DISPENSER PLUMBING ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 26 1 Plate, Sole...
Page 62 - Thermal Barrier Box Assembly; Kit, Detergent Sensor Mounting
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION TEMPSTAR SDS DISPENSER ASSEMBLY (CONTINUED) 54 ITEM QTY DESCRIPTION Mfg. No. 54 1 Thermal Barrier Box Assembly 05700-021-48-14 55 1 Thermal Box Top Weldment 05700-021-50-64 56 1 Thermal Box ...
Page 63 - DESCRIPTION
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION SAFETY DOOR INTERLOCK (SDI) /EXHAUST FAN CONTROL/TRANSFORMER MOUNTING BOX 55 Safety Door Interlock Box Bottom 05700-001-21-26 Safety Door Interlock Box Cover 05700-001-21-27 Other Safety Doo...
Page 66 - DRAIN QUENCH ASSEMBLY; Modified Compression; To Dishmachine Drain; Street
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 5: PARTS SECTION 58 DRAIN QUENCH ASSEMBLY From the existing drain, attach the two additional Tees using the 1-1/2” NPT Close Nipples. Tighten the Reducers into the Teesas shown above. Attach the Modified Com...
Page 68 - SECTION 6: ELECTRICAL SCHEMATICS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS TEMPSTAR (TOP MOUNT W/ CYCLE SWITCHES) 208-230 VOLT - 50/60 HERTZ - SINGLE & THREE PHASE 60
Page 92 - TEMPSTAR SDS DISPENSER SCHEMATIC
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS TEMPSTAR SDS DISPENSER SCHEMATIC 84 09905-011-48-52
Page 94 - SDI OPTION
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS SDI OPTION 86
Page 95 - EXHAUST FAN HOOKUP/DRAIN QUENCH OPTIONS
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35 Issued: 12-07-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS 87 EXHAUST FAN HOOKUP/DRAIN QUENCH OPTIONS
Page 97 - SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS; ALABAMA TO FLORIDA
ALABAMA JONES-McLEOD APPLIANCESVC 1616 7TH AVE. NORTHBIRMINGHAM, AL 35203(205) 251-0159800-821-1150FAX: (205) [email protected] JONES-McLEOD APPLIANCESVC 854 LAKESIDE DRIVEMOBILE, AL 36693(251) 666-7278800-237-9859FAX: (251) 661-0223 ALASKA RESTAURANT APPLIANCESERVICE 7219 ROOSEVELT W...
Page 98 - FLORIDA TO MARYLAND
JONES-McLEOD APPLIANCESVC 854 LAKESIDE DRIVEMOBILE, AL 36693(251) 666-7278800-237-9859FAX: (251) [email protected] NASS PARTS AND SERVICE,INC. 1108 SOUTH WOODS AVENUEORLANDO, FL 32805(407) 425-2681(800) 432-2795(407) 425-3463 FAX NASS PARTS AND SERVICE,INC. 1376 HEIDE AVENUEPALM BAY, ...
Page 99 - MARYLAND TO NEW YORK
EMR SERVICE DIVISION 106 WILLIAMSPORT CIRCLESALISBURY, MD 21804(410) 543-8197888-687-8080FAX: (410) [email protected] EMR SERVICE DIVISION 5316 Sunnyside Ave.Beltsville, MD 20715(301) 931-7000800-348-2365FAX: (301) [email protected] GCS SERVICE INC. SILVER SPRING, MD (301) 585-75...
Page 100 - NEW YORK TO PENNSYLVANIA
B.E.S.T. INC. 3003 GENESEE STREETBUFFALO, NY 14225(716) 893-6464800-338-5011FAX: (716) [email protected] DUFFY'S EQUIPMENT SVC. 3138 ONEIDA STREETSAUQUOIT, NY 13456(315) 737-9401800-443-8339FAX: (315) [email protected] NORTHERN PARTS & SVC. 21 NORTHERN AVENUEPLATTSBURGH, NY 12903...
Page 101 - RHODE ISLAND TO WISCONSIN
RHODE ISLAND GCS SERVICE INC. EAST PROVIDENCE, RI (401) 434-6803800-462-6012FAX: (401) 438-9400 SUPERIOR KITCHEN SER-VICE INC. 669 ELMWOOD AVENUEPROVIDENCE, RI 02907(888) 590-1899(401) 781-1996 FAX SOUTH CAROLINA AUTHORIZED APPLIANCESERVICECENTER 1811 TAYLOR ST. COLUMBIA, SC 29202 (803) 254-8414 FAX...
Page 102 - WISCONSIN TO WYOMING/INTERNATIONAL
GENERAL PARTS, INC. W223 N735 SARATOGA DRIVEWAUKESHA, WI 53186(262) 650-6666(800) 279-9946(262) 650-6660 FAX WYOMING HAWKINS COMMERCIALAPPLIANCE SERVICE 3000 S. WYANDOT ST.ENGLEWOOD, CO 80110(303) 781-5548(800) 624-2117FAX: (303) [email protected] METRO APPLIANCE SERVICE 1640 S BRO...
