Invacare 5143 - Manual
Invacare 5143 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTE: This will allow you to disengage head; INSTALLATION
- Page 3 – FIGURE 4; Repeat this procedure for other link fabric extension.; FIGURE 4 - ATTACHING STRANDS TO EXTENSION; spring and attach open-end hooks to the head spring. Refer to; FIGURE 5
- Page 4 – Attach bed ends to head and foot spring assemblies.; FIGURE 6
1
Part No. 53000M701
84-Inch Bed Extension
NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use.
Contact Invacare for further instruction.
SAFETY SUMMARY
To ensure the safe installation of the 84-inch bed extension, these instructions
MUST
be
followed:
WARNING
DO NOT install this equipment without first reading and understanding this
instruction sheet. If you are unable to understand the warnings, cautions,
and instructions, contact a healthcare professional, dealer or technical
personnel before attempting to use this equipment - otherwise injury or
damage may occur.
Ensure ALL screws and nuts are tight at all times.
The 84-inch Bed Extension Kit DOES NOT change the weight limitation of
your bed. Refer to your owner's manual for correct weight limitation.
PURPOSE:
For conversion of a Mobilite 80-inch Split Spring Mattress Platform to an 84-inch Mattress
Platform.
TOOLS REQUIRED:
Two (2) 1/2-inch Open End Wrenches
One (1) Vise Grip
84-INCH BED EXTENSION
Assembly, Installation and Operating Instructions
Model No. 5143 and 5143IVC
SAVE THESE INSTRUCTIONS
DISASSEMBLY
1. Remove the main drive shaft from the bed.
2. Retract the footboard drive shaft.
3. Disconnect head spring pull tube by removing cotter and clevis pins.
Kit Includes the Following:
ITEM
PART NO.
QTY.
DESCRIPTION
1
7000M465
1
Extension Weldment L.H.
2
7000M466
1
Extension Weldment R.H.
3
7000M713
1
Drive Shaft Assembly
4a
7000M469
1
Pull Tube End Assembly (5143)
4b
1118839
1
Pull Tube End Assembly (5143IVC)
5
53000M699
2
Link Fabric Extension
w/ Open Hooks Attached
6
53000M701
1
Instruction Sheet
7
53000M434
2
Bi-way Locknut
8
54000M641
2
5/16-18 x 1-inch Bolt
9
51000M135
4
Helical Spring
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
84-Inch Bed Extension 2 Part No. 53000M701 3. Attach the six (6) open-end hooks to the existing link fabric at the foot spring of the bed assembly. NOTE: Make sure the open end of the hooks are positioned down towards the ground/floor. 4. Attach one (1) helical spring to one (1) end of the link fabr...
3 Part No. 53000M701 84-Inch Bed Extension 7. Attach second helical spring to the opposite end of the link fabric extension.8. Using vise grips, secure the helical spring into the mounting hole on the four-inch extension. Refer to FIGURE 4 . 9. Repeat this procedure for other link fabric extension. ...
84-Inch Bed Extension 4 Part No. 53000M701 11. Attach bed ends to head and foot spring assemblies. NOTE: If the bed has manually or motorized adjustable bed ends, use the extended drive shaftsupplied with this kit. 12. Replace the existing drive shaft with the extended drive shaft supplied with this...
