Intellinet Network Solutions 524537 - Manual

6 2 network settings Before you can connect to the router and begin your configuration, you need to be able to obtain an IP address automatically; that is, establish a dynamic IP address. The IP Address Setup procedures for Windows 98SE, Me, 2000, XP and Vista are presented here. 2.1 iP address setu...

7 5. on the Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK” to return to the previous screen. 6. When the local Area Connection Properties screen displays again, click “OK.” Windows XP 1. On your PC’s desktop, click “Start...

8 4. On the Internet Protocol (TCP/IP) Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”; then click “OK” to return to the Local Area Connection Properties screen.5. When the local Area Connection Properties screen displays again, click “OK....

10 3 configuration This 4-Port Broadband Router provides a Web-browser management mode that uses the Web- based user interface presented in this section. Once you’ve logged in (Section 2.2 above), the Configuration homepage will display, from which you can navigate through the utility as needed to e...

15 DHCP Lease Time — Specify how long (in seconds) an IP address is valid for a computer before a new IP address is issued. Normally, there is no need to change this value.In the DHCP IP Address Reserving panel, you can reserve IPs for a specific computer. Auto Setup — Select to assign a particular ...

16 Apply — Click “Apply,” then “Save” to set and save any changes. 3.5.3 Virtual Ser ver Setup This screen lets you specify some services to be visible by outside users. The router can detect an incoming service request and forward it to the specific local computer to handle it. For example, a user ...

18 the Internet (by selecting “Permit” or “Deny” from the drop-down menu. NOTE: enter the 12-digit MAC address in this format: XX-XX-XX-XX-XX-XX (with the hyphens). Add — Click after filling in the fields to add the rule and display the Current MAC Filtering Table, which shows the valid MAC filterin...

20 3.8.1 Login ID & Password Setup The factory-set default password is “guest.” You can change the default password to ensure that someone can’t adjust your settings without your permission. Every time you change your password, record it and keep it in a safe place: If you forget it, you’ll need...

22 4 sPecifications Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) General • LAN ports: 4 RJ45 10/100 Mbps data ports • LAN ports with Auto MDI/MDI-X • WAN port: 10/100 Mbps RJ45 connector • Certifications: FCC Class B, CE Mark Router • Supported WAN connection t...