Page 2 - Table of Contents
2 Table of Contents Safety and Regulatory Notices .................................................................................................... 3 Section 1: Product Overview 1.1 About the Pro Series Network Cameras and Video Servers........................................... 5 1.2 Main Featur...
Page 3 - with EMC standards.; Safety
3 Appendix A: Frequently Asked Questions (FAQ)....................................................................... 74 Appendix B: Accessing the Camera via HyperTerminal…………………................................. 79 Appendix C: Troubleshooting.............................................................
Page 4 - Video Standard and Product Classification; Important Notices
4 Video Standard and Product Classification As the video standard varies from country to country, users are asked to check it first and choose the right model. The two most common video standards used are NTSC and PAL. NTSC is the video system or standard used in North America and most of South Amer...
Page 5 - : Product Overview; About the Pro Series Network Cameras and Video Servers; This user manual includes the Network Video; Main Features and Benefits
5 1: Product Overview 1.1 About the Pro Series Network Cameras and Video Servers The Pro Series Network Cameras and Network Video Server are all-in-one networking devices that contain a digital color camera (or a connection for analog CCTV cameras), a powerful Web server, an optimized embedded opera...
Page 6 - Dual Mode Compression (only certain models); : Physical Description; Package Contents; ITEM
6 Dual Mode Compression (only certain models) For application providers, system integrators and other APs, this camera supports three types of video: 1) MPEG4 video; 2) M-JPEG compression; and 3) MPEG4+M-JPEG mode. Full Duplex Two-Way Audio (only certain models) Full duplex two-way audio is availabl...
Page 7 - Rear View; Power LED; Network Connector
7 2.2 MPEG4 CCD and CMOS Camera Front View Power LED (Red): Once power is supplied to the camera, the red LED will light. Operating Status LED (Green): This LED indicates the camera’s operating status. Once power is supplied, the LED lights and then blinks once every second as long as the video is t...
Page 8 - Infrared Emitter Diodes
8 Power Connector: Only use the supplied AC adapter to avoid any possible damage from electric shock. Network Connector: Connect 10Base-T Ethernet or 100Base-TX Fast Ethernet cable. GPIO Connector: To connect external devices such as infrared sensors, alarms or motion detectors (refer to Appendix F:...
Page 9 - Video Input
9 2.4 Network Video Server Video Input: To input video signal through a coaxial cable Video Output: To output video signal through a coaxial cable. On Air LED (Green): This LED indicates the Video Servers operating status. Once power is supplied, the LED lights and then blinks once every second as l...
Page 12 - : Installation Summary and Examples
12 Rear View 3: Installation Summary and Examples 1. Connect the Ethernet and power to the Pro Series Network Camera. 2. Install and launch the IP Installer program on the enclosed CD. 3. Assign an IP address and network settings. 4. Securely mount the camera. Owners of the indoor fixed dome camera ...
Page 14 - Connecting the Camera to a PC
14 4: Assigning an IP Address and Accessing the Camera’s Homepage 4.1 Connecting the Camera to a PC Connect with a direct cable (non-crossover UTP cable) when connecting the camera to a switch, hub or router. Connect with a crossover UTP cable when connecting the camera to a PC.
Page 15 - Setting up the IP Address Using IP Installer
15 4.2 Setting up the IP Address Using IP Installer To access the camera, you need to assign an appropriate network IP address. Run the IP address installation program (IP Installer.exe) on a PC that is connected to the same local network as the camera. You can download IP Installer from http://www....
Page 16 - Accessing the Camera’s Homepage; Starting the Web Browser
16 4.3 Accessing the Camera’s Homepage Access the camera to monitor real-time images over the Internet and configure the camera settings through any standard Web browser on a local or remote network. The following Web browsers are supported. - MS Internet Explorer 5.x, 6.x and 7.x (ActiveX + Java) -...
Page 17 - Java is the only choice given.
17 MS Internet Explorer – JPEG Stream Mode Both options, ActiveX and Java, are available in this operational mode. If you can run and install ActiveX controls, you should select ActiveX as your preferred viewing program, as it offers higher frame rates and better functions. MS Internet Explorer – MP...
Page 18 - Non-MS Internet Explorer – MPEG4 Stream Mode; Web Server Port 80
18 Non-MS Internet Explorer – MPEG4 Stream Mode Java is the only choice given, but the warning message tells you that even though you are able to login you won't be able to see the live image. You still can access the administration menu to make changes to the settings. Camera model 550710 does not ...
Page 19 - : If you experience difficulty with the
19 ActiveX Installation for MS Explorer Users (automatic) The first time you login to the camera using ActiveX, you are notified that a required plug-in / ActiveX control is required. You need to allow the installation of ActiveX by clicking "Yes" to the question "Do you want to install ...
Page 25 - : Adjusting the Camera Lens; Adjusting the Focus; replaced and must not be removed.; Set Screw
25 5: Adjusting the Camera Lens 5.1 Adjusting the Focus To get the finest image, adjust the lens focus according to your environment. Before adjusting, turn the set screw counterclockwise, then turn the lens in either direction till you get the most well-defined image edges while viewing the picture...
Page 26 - : Administrator Menu
26 6: Administrator Menu You can control the configurations of the camera using the administrator tools, which can be accessed only by an authorized user. If non-authorized users try gaining access, you may see a warning message "You are not an administrator." 6.1 Overview of the Administrat...
Page 29 - Video without Name/Location Stamp and Time/Date Stamp
29 Resolution Select the resolution for output video. Pro Series CCD Network Cameras support three types of image resolution. NTSC: D1 (720x480), VGA (640x480) and CIF (352x240); PAL: D1 (720x576), VGA (640x576) and CIF (352x288). The Digital PTZ CMOS camera supports 720x480, 640x480, 352x240 and 32...
Page 30 - Set the image contrast in the range of 0 to 200.
30 De-Interlace Interlaced video is composed of two fields that are captured at different moments in time. When displayed on a typical computer screen, interlaced video frames will exhibit motion artifacts when both fields are combined and displayed at the same moment (today's computer screens are p...
Page 31 - Load Default Values; Set the image configuration as default values.
31 Hue Most sources of visible light contain energy over a band of wavelengths. Hue is the wavelength within the visible-light spectrum at which the energy output from a source is greatest. Normally there is no need to change the default value (8), but if you wish to experiment with different hue va...
Page 34 - BLC; Further Reduce Exposure Time
34 Sharpness This value lets you control the sharpness of the image. Lower values generate a smoother image; higher values generate a crisper image. Values of "4" and "5" give you good results in general. Exposure Mode This controls the exposure mode of the camera. The exposure mode ...
Page 35 - Network Configuration
35 6.3 Network Configuration 6.3.1 MPEG4 Cameras, Dome Cameras and Network Video Server This screen defines the network type and addresses of the camera. Here you can configure the camera’s IP address, the DNS server address and the SMTP server IP address.
Page 39 - Password must be between 5 and 10 characters.; Authority
39 6.4 User Configuration 6.4.1. MPEG4 Cameras, Dome Cameras and Network Video Server This screen is used to define and configure user accounts for camera access. ID User Name must be between 5 and 10 characters. Password Password must be between 5 and 10 characters. Maximum Frame Rate You can defin...
Page 41 - Event Trigger Configuration; Trigger Condition
41 6.5 Event Trigger Configuration 6.5.1 MPEG4 Cameras, Dome Cameras and Network Video Server This screen is used to receive captured video through e-mail or an FTP. You may also connect external devices, such as an infrared sensor or alarm sensor, to use with the provided terminal block (refer to A...
Page 43 - Image Capture Option; Image capture frame rate:
43 Image Capture Option This is to configure image capture options when an event is triggered. When an event occurs, you can get the pre-event and post-event images by setting "Before event" and "After event." Before event: You may set the starting time to capture an image before the...
Page 44 - Image Capture option limitation; If a warning message appears, reduce the value of the option.
44 Trigger Output This is to configure digital output states and control script. The Pro Series Network Camera sends captured images via e-mail or an FTP server when connected external sensors detect events. Supply voltage to output port for xxx seconds. This is to supply voltage to the output port ...
Page 46 - System Configuration; Camera Name
46 6.6 System Configuration 6.6.1 MPEG4 Cameras, Dome Cameras and Network Video Server This screen is used to configure camera name, location, operation mode and system information, as well as time configuration for the camera. Camera Name Define the camera name, maximum of 10 characters. Camera Loc...
Page 48 - Synchronized with NTP Server; If this procedure; Enable Daylight Saving; Enter the dates you want to start/end Daylight Saving Time.; Restore Factory Default Values
48 Synchronized with NTP Server The camera automatically configures the date and time through the NTP (network time protocol) server. The NTP server is based on Greenwich time. Select the NTP server, IP address and time zone to set the date and time automatically, then click "submit." NOTE: ...
Page 49 - WEP
49 6.7 Wireless Configuration (for wireless cameras only) This screen is used to configure wireless settings to match your access point for a wireless network connection. 6.7.1 Wireless Setup 1. Select the operation mode to determine the type of wireless communication for the Pro Series Wireless Net...
Page 50 - Authentication
50 Authentication : WEP uses two types of authentication methods to authenticate the connection request. One is Open key authentication, in which all clients are allowed to authenticate; the second is Shared key authentication, which allows the AP (access point) to send the client a challenge text, ...
Page 51 - WPA; personal mode; ) is designed for home and small
51 WPA & WPA2 (personal) Wi-Fi Protected Access (WPA and WPA2) is a more effective way to secure wireless (Wi-Fi) computer networks. It was created in response to several serious weaknesses which researchers had found in the previous system, Wired Equivalent Privacy (WEP). WPA implements the maj...
Page 52 - IMPORTANT; Infrastructure Mode
52 IMPORTANT Infrastructure Mode This is an 802.11 networking framework in which devices communicate with each other by first going through an access point (AP). In Infrastructure mode, wireless devices can communicate with each other or can communicate with a wired network. When one AP is connected...
Page 53 - PoE Midspan
53 7: PoE (Power over Ethernet) Support Power over Ethernet, or PoE, technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. This technology is useful for powering IP telephones, wireless LAN access point...
Page 55 - Installation
55 8: Multi-Viewer Application for Windows With "Multi-Viewer for Windows," it is possible to view up to four different network cameras on one PC monitor. Installation Insert the supplied CD into the CD-ROM drive of your computer and open the "Multi-Viewer" folder. Find "Multivie...
Page 57 - Adding a camera; IP Address
57 Expand/Collapse the Camera Information and Message Window Camera Information Displays information such as frame rate (F/S), camera type, stream type, camera IP and user name. Log Messages Displays information about changed configurations and connected cameras. Adding a camera To add a camera, sim...
Page 63 - 0: RTSP Video Playback; RTSP Playback in MPlayer for Windows
63 10: RTSP Video Playback RTSP stands for "Real Time Streaming Protocol ." RTSP enabled video streaming clients, such as MPlayer, can access the video data stream of the camera directly and you can watch the live video without connecting to the camera with your Web browser first. MPlayer is...
Page 65 - Access to the camera via HTTPS:
65 11: SSL Encryption / Access via HTTPS The MPEG4 cameras are equipped with SSL encryption, a safe way of accessing your camera. SSL encryption ensures, that the data traffic between your camera and the computer is encrypted. Access to the camera via HTTPS: To utilize HTTPS, you need to enter the f...
Page 67 - 2: Remote Access to a Camera & Router Setup; MPEG4 Network Camera default values
67 12: Remote Access to a Camera & Router Setup To gain access to a camera in your local network over the Internet, certain ports need to be opened and forwarded in your router. The camera uses the following ports by default: - Web Server port = 80 - Image Transfer port = 40001 - Audio Send port...
Page 71 - 3: Developer Information; HTTP API
71 13: Developer Information This section of the user manual contains useful information for software developers and Web programmers. 13.1 Software Development Kit (SDK) Software developers can download an SDK for INTELLINET NETWORK SOLUTIONS Pro-Series cameras and network video servers from www.net...
Page 72 - Direct Access to internal JPEG; Direct public access to image via HTTP:
72 13.2 Direct Access to internal JPEG To utilize the camera in third-party video surveillance programs, you can activate the direct image access. It allows accessing the internal JPEG image of the camera that other programs can download. You can define the behavior of this function in the System Co...
Page 74 - What is the default IP address of the network camera?
74 Appendix A: Frequently Asked Questions (FAQ) 1. What is the default IP address of the network camera? The default IP address is 192.168.1.221 2. I use a MacOS or Linux system and cannot use IP Installer to set up my camera. How can I install the camera without that tool? 1. You will need to chang...
Page 76 - How do I activate the FTP upload function?; ( ) send captured image to FTP server
76 7. The camera does not send any e-mails. Why? 1. The problem occurs because the camera cannot contact the E-mail server Check: - Is the e-mail (SMTP) server address correct? (Network Configuration) - Did you specify the correct gateway IP address? (Network Configuration)? - Did you specify correc...
Page 79 - Appendix B: Accessing the camera via HyperTerminal
79 Appendix B: Accessing the camera via HyperTerminal NOTE: This section is for advanced users only. HyperTerminal is a basic program for Windows 9x/NT/2000XP/Vista. A PC can communicate with external devices through the serial port by using this program. The steps you should take to set the HyperTe...
Page 80 - Configure the parameters as shown below:
80 3. Configure the parameters as shown below: (all MPEG4 models) (JPG CMOS Camera 550710 uses the following values: 19200 – 8 – None – 1 – None) 4. The window should display as below when configured properly. You can see real-time messages generated by the camera operating system which can be recor...
Page 81 - Appendix C: Troubleshooting; PINGing Your IP address; Destination host unreachable; Symptoms Possible causes Remedial actions
81 Appendix C: Troubleshooting This appendix provides useful information to help you to resolve any difficulty you might have with your Pro Series Network Camera. Fault symptoms, possible causes and remedial actions are provided within a quick reference table. PINGing Your IP address By sending a pa...
Page 83 - Appendix D: Utilizing IP Addresses on a Local Network; Introduction
83 NOTE: If you still have a problem with your camera after following the above recommendations, contact your dealer or check the INTELLINET ACTIVE NETWORKING Web site: http://www.networkipcamera.com. Appendix D: Utilizing IP Addresses on a Local Network Introduction Access to the Internet is achiev...
Page 85 - Appendix E: Updating Firmware; Identify the Version of Firmware
85 Appendix E: Updating Firmware CAUTION: The process for updating current firmware is already installed in your camera. If you begin the process, follow the manual instructions. During the process, do not disconnect the network or power source, and avoid any physical shock to the camera. Otherwise,...
Page 86 - Not in use
86 Appendix F: The I/O Connector (MPEG4 Cameras) The I/O Connector provides the physical interface to a digital output and a single digital, photo-coupled input that is used for connecting a variety of external alarm devices to the Pro Series Network Camera, including infrared sensors, switches and ...
Page 87 - How to Use the DynDNS DDNS Server
87 Appendix G: Dynamic Domain Name System (DDNS) Your Internet service provider (ISP) provides you with at least one IP address that you use to connect to the Internet. The address you get may be static, meaning it never changes, or dynamic, meaning it’s likely to change periodically. Just how often...
Page 88 - Read and follow the instructions about cookies!
88 2. If you didn’t register your ID, click "Create Account" and register your ID. Or, just log in with a registered ID. NOTE: Read and follow the instructions about cookies! 3. Enter your information highlighted by the red circles and click "Create Account."
Page 91 - DDNS Registration for the Pro Series Network Camera
91 DDNS Registration for the Pro Series Network Camera 1. After setting up ODS or DynDNS, open the Network Configuration page of the administrator menu. 2. Enter at least one DNS server. 3. In the DDNS Registration section, a. Click "enable" b. Click on the DDNS Server field c. Select the DD...
Page 92 - Appendix H: Reinstating the Factory Default Settings; Pressing the Reset Button
92 Appendix H: Reinstating the Factory Default Settings This information details how to set the default settings for the Pro Series Network Camera. In certain circumstances, it may be necessary to restart or reinstate the factory default settings for your camera. This is done by pressing the Reset b...
Page 93 - Appendix I: Glossary of Terms; and installed automatically as required.
93 Appendix I: Glossary of Terms ActiveX - A control (or set of rules) used by a browser. ActiveX controls are often downloaded and installed automatically as required. ARP - Address Resolution Protocol. A method for finding a host's Ethernet address from its Internet address. The sender broadcasts ...
Page 95 - Appendix J: Product Specifications
95 Appendix J: Product Specifications Pro Series Network Camera 550796 MPEG4, CCD, Day/Night, PAL Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) General • 32-bit ARM9 RISC CPU • 16 MByte video frame buffer • 8 MByte flash memo...
Page 97 - Pro Series Wireless Network Camera 550178
97 Pro Series Wireless Network Camera 550178 MPEG4, CCD, Day/Night, PAL Standards • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wireless LAN) • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) General • 32-bit ARM9 RISC CPU ...
Page 98 - Pro Series Wireless Network Camera 550253
98 Pro Series Wireless Network Camera 550253 MPEG4, CCD, Day/Night, NTSC Standards • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wireless LAN) • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) General • 32-bit ARM9 RISC CPU...
Page 99 - Pro Series Night Vision Network Camera 550291
99 Pro Series Night Vision Network Camera 550291 MPEG4, CCD, Day/Night, IR Lens, PAL Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) General • 32-bit ARM9 RISC CPU • 16 MByte video frame buffer • Image buffer: 200 frames (CIF) ...
Page 100 - Pro Series Night Vision Network Camera 550314
100 Pro Series Night Vision Network Camera 550314 MPEG4, CCD, Day/Night, IR Lens, NTSC Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) General • 32-bit ARM9 RISC CPU • 16 MByte video frame buffer • Image buffer: 200 frames (CIF...
Page 101 - Pro Series Wireless Night Vision Network Camera 550307
101 Pro Series Wireless Night Vision Network Camera 550307 MPEG4, CCD, Day/Night, IR Lens, PAL Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wireless LAN) General ...
Page 102 - Pro Series Wireless Night Vision Network Camera 550321
102 Pro Series Wireless Night Vision Network Camera 550321 MPEG4, CCD, Day/Night, IR Lens, NTSC Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wireless LAN) General...
Page 103 - Pro Series Digital PTZ Network Camera 550468
103 Pro Series Digital PTZ Network Camera 550468 MPEG4 + M-JPEG Dual Mode, 2.0 Megapixel CMOS, PAL/NTSC Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) General • 32-bit ARM9 RISC CPU • 16 MByte video frame buffer • Image buffer...
Page 104 - Pro Series Digital PTZ Wireless Network Camera 550482
104 Pro Series Digital PTZ Wireless Network Camera 550482 MPEG4 + M-JPEG Dual Mode, 2.0 Megapixel CMOS, PAL/NTSC Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.3af (Power over Ethernet) • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wire...
