Intellinet Network Solutions 524537 - Manuals

Page 3 - introduction; Thank you for purchasing the INTellINeT NeTWoRK SolUTIoNS; Package Contents

3 introduction Thank you for purchasing the INTellINeT NeTWoRK SolUTIoNS ™ 4-Port Broadband Router, Model 524537. Combining a router, firewall and four-port Fast Ethernet switch, this handy device lets you experience fast speeds as you surf the Web, download music or photos, and play online games. A...

Page 4 - taBle of contents; section

4 taBle of contents 1 Hardware Installation .................................................................................................... 5 1.1 Rear Panel Ports & Jacks ................................................................................... 5 1.2 Front/Top Panel LEDs ............

Page 5 - hardware installation; the modem and the router.

5 1 hardware installation Using the included RJ45 Ethernet cable (and more, as needed), make your 4-Port Broadband Router network connections by following the steps below and referring to the Port and LED descriptions (presented from left to right). 1. Turn off all devices to be incorporated into th...

Page 6 - network settings; iP address setup; Do not

6 2 network settings Before you can connect to the router and begin your configuration, you need to be able to obtain an IP address automatically; that is, establish a dynamic IP address. The IP Address Setup procedures for Windows 98SE, Me, 2000, XP and Vista are presented here. 2.1 iP address setu...

Page 7 - Windows XP; and go to the Control Panel.

7 5. on the Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK” to return to the previous screen. 6. When the local Area Connection Properties screen displays again, click “OK.” Windows XP 1. On your PC’s desktop, click “Start...

Page 8 - Windows Vista

8 4. On the Internet Protocol (TCP/IP) Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”; then click “OK” to return to the Local Area Connection Properties screen.5. When the local Area Connection Properties screen displays again, click “OK....

Page 10 - configuration; to enter or change settings.

10 3 configuration This 4-Port Broadband Router provides a Web-browser management mode that uses the Web- based user interface presented in this section. Once you’ve logged in (Section 2.2 above), the Configuration homepage will display, from which you can navigate through the utility as needed to e...

Page 15 - the ports for one PC at the same time.

15 DHCP Lease Time — Specify how long (in seconds) an IP address is valid for a computer before a new IP address is issued. Normally, there is no need to change this value.In the DHCP IP Address Reserving panel, you can reserve IPs for a specific computer. Auto Setup — Select to assign a particular ...

Page 16 - Predefined Trigger Rules

16 Apply — Click “Apply,” then “Save” to set and save any changes. 3.5.3 Virtual Ser ver Setup This screen lets you specify some services to be visible by outside users. The router can detect an incoming service request and forward it to the specific local computer to handle it. For example, a user ...

Page 18 - enter the; Connection Filtering Configuration

18 the Internet (by selecting “Permit” or “Deny” from the drop-down menu. NOTE: enter the 12-digit MAC address in this format: XX-XX-XX-XX-XX-XX (with the hyphens). Add — Click after filling in the fields to add the rule and display the Current MAC Filtering Table, which shows the valid MAC filterin...

Page 20 - Confirmed New Password

20 3.8.1 Login ID & Password Setup The factory-set default password is “guest.” You can change the default password to ensure that someone can’t adjust your settings without your permission. Every time you change your password, record it and keep it in a safe place: If you forget it, you’ll need...

Page 22 - sPecifications; and static IP

22 4 sPecifications Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) General • LAN ports: 4 RJ45 10/100 Mbps data ports • LAN ports with Auto MDI/MDI-X • WAN port: 10/100 Mbps RJ45 connector • Certifications: FCC Class B, CE Mark Router • Supported WAN connection t...