Intel SSDSA2BW120A301 - Manual

Intel SSDSA2BW120A301

Intel SSDSA2BW120A301 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
Page: / 27

Table of Contents:

  • Page 2 – Ordering Information
  • Page 3 – Contents
  • Page 5 – Overview; Drive 520 Series (Intel
  • Page 6 – Product Specifications; Capacity; performance based on the data pattern of the workload.; User Addressable Sectors; Compressible Performance
  • Page 7 – Incompressible Performance; Latency
  • Page 8 – Electrical Characteristics; Operating Voltage and Power Consumption
  • Page 9 – Product Regulatory Compliance; in; Product Regulatory Compliance Specifications
  • Page 10 – Reliability; requirements as specified in the JESD218 specification.; Hot Plug Support; system without hardware device detection.; Reliability Specifications
  • Page 11 – Mechanical Information; Figure 1
  • Page 12 – Figure 2
  • Page 13 – Pin and Signal Descriptions; Pin Locations; Connector Pin Signal Definitions; Layout of Signal and Power Segment Pins; Signal Segment S1
  • Page 14 – Power Pin Signal Definitions; Serial ATA Power Pin Definitions
  • Page 15 – Supported Command Sets; ATA General Feature Command Set; Power Management; the SET FEATURES command.
  • Page 16 – Security Mode Feature Set
  • Page 17 – lists the SMART attributes supported by the Intel SSD 520 Series; SMART Attributes
  • Page 19 – defines the SMART Attribute status flags.; SMART Logs; appropriate commands.; Device Statistics; Device Statistics log as defined in the ATA specification.; SMART Attribute Status Flags; Device Statistics Log
  • Page 20 – manipulate two SMART Logs:; Data Set Management Command Set; • DATA SET MANAGEMENT; Host Protected Area Command Set
  • Page 21 – General Purpose Log Command Set; Software Settings Preservation; preservation of software settings.
  • Page 22 – Certifications and Declarations; Device Certifications and Declarations
  • Page 23 – References; defines the terms and acronyms used in this document.; Standards References; Glossary of Terms and Acronyms
  • Page 24 – Revision History; Glossary of Terms and Acronyms (Continued)
  • Page 25 – Appendix A IDENTIFY DEVICE Command Data; Returned Sector Data
Loading the manual

Order Number: 325968-001US

February 2012

Intel

®

Solid-State Drive 520 Series

Product Specification

1. Performance values vary by capacity.
2. Random 4 KB writes measured using out-of-box SSD.

Capacity: 60/120/180/240/480 GB

Components:
— Intel

®

25nm NAND Flash Memory

— Multi-Level Cell (MLC)

Form Factor: 2.5-inch

Thickness: 7 mm and 9.5 mm
— 7 mm: 120/180/240 GB
— 9.5 mm: 60/120/180/240/480 GB

Weight: Up to 78 grams

SATA 6Gb/s Bandwidth Performance

1

(Iometer* Queue Depth 32)
— Sustained Sequential Read: Up to 550 MB/s
— Sustained Sequential Write: Up to 520 MB/s

Read and Write IOPS

1

(Iometer Queue Depth 32)
— Random 4 KB Reads: Up to 50,000 IOPS
— Random 4 KB Writes: Up to 80,000 IOPS

2

Latency (average sequential)
— Read: 80 µs (TYP)
— Write: 85 µs (TYP)

Data Compression

AES 256-bit Encryption

End-to-End Data Protection

Compatibility
— Intel

®

SSD Toolbox with Intel

®

SSD Optimizer

— Intel

®

Data Migration Software

— Intel

®

Rapid Storage Technology

— Intel

®

6 Series Express Chipsets

(with SATA 6Gb/s)

— SATA Revision 3.0
— ACS-2
— SSD-enhanced SMART ATA feature set
— Native Command Queuing (NCQ)

command set

— Data Set Management Command

Trim attribute

Power Management
— 5 V SATA Supply Rail
— SATA Link Power Management (LPM)

Power
— Active (MobileMark* 2007 Workload):

850 mW (TYP)

— Idle: 600 mW (TYP)

Temperature
— Operating: 0

o

C to 70

o

C

— Non-Operating: -55

o

C to 95

o

C

Reliability
— Uncorrectable Bit Error Rate (UBER):

<

1 sector per 10

16

bits read

— Mean Time Between Failures (MTBF):

1,200,000 hours

Shock (operating and non-operating):

1,500 G/0.5 msec

Vibration
— Operating: 2.17 G

RMS

(5-700 Hz)

— Non-operating: 3.13 G

RMS

(5-800 Hz)

Certifications and Declarations:
— UL*
— CE*
— C-Tick*
— BSMI*
— KCC*
— Microsoft* WHQL
— VCCI*
— SATA-IO*

Product Ecological Compliance
— RoHS*

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Ordering Information

Intel ® Solid-State Drive 520 Series Product Specification February 2012 2 Order Number: 325968-001US L Ordering Information Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPL...

Page 3 - Contents

Intel ® Solid-State Drive 520 Series February 2012 Product Specification Order Number: 325968-001US 3 Intel ® Solid-State Drive 520 Series Contents 1.0 Overview ................................................................................................................... 5 2.0 Product Specifica...

Page 5 - Overview; Drive 520 Series (Intel

Intel ® Solid-State Drive 520 Series February 2012 Product Specification Order Number: 325968-001US 5 Intel ® Solid-State Drive 520 Series 1.0 Overview This document describes the specifications and capabilities of the Intel ® Solid-State Drive 520 Series (Intel ® SSD 520 Series) 1 . The Intel SSD 5...

Other Intel Models

All Intel Other