Intel P0715 - Manual - manualsarea.com

Page 2 - About this installation guide

2 P0715 Quick Installation Copyright © 2006 All Rights Reserved. The information in this document is subject to change without prior notice inorder to improve the reliability, design and function. It does not represent acommitment on the part of the manufacturer. Under no circumstances will the manu...

Page 3 - Warning

3 3 P0715 Quick Installation Warning Panel PC and their components contain very delicate Integrated Circuits(IC). To protect the Panel PC and its components against damage fromstatic electricity, you should always follow the following precautionswhen handling it : 1. Disconnect your Panel PC from th...

Page 4 - Getting Started; If any of the above items is damaged or missing, contact your; PACKING LIST

4 P0715 Quick Installation Getting Started This section will help you have your P0715 up and runningsmoothly. Before up and running, please make sure the package containsall of above accessories. If any of the above items is damaged or missing, contact your vendor immediately. P0715 PACKING LIST 9 x...

Page 5 - Specification

5 5 P0715 Quick Installation Model Name CPU Intel Low Voltage Celeron 400~733MHz CPUFSB100/133MHz Cache 2nd Level 256K Memory 1 x 144Pin SO-DIMM up to 512MB SDRAM VRAM SMI722 G8 Lynx 3D+ engine 8MB Video RAM on chip Chipset Intel 815E + Intel CH2 ATA / IDE Ultra DMA 33, support 2 IDE device Audio Re...

Page 6 - Mounting; Hook Mounting

6 P0715 Quick Installation Mounting Hook Mounting Arm Mounting

Page 7 - Dimension

Page 8 - OSD of Front Panel

Page 9 - Location of I/O Ports

9 9 P0715 Quick Installation Location of I/O Ports Before starting to install software on your new Panel PC please spend sometime to find out the exact location of connectors and HDD (if pre-installed). Thefront panel does not contain any indicators, switches, connectors or driveaccess. All these ar...

Page 10 - Connecting Peripherals; Connecting an external CRT

10 P0715 Quick Installation Connecting Peripherals The user can use the I/O interfaces located at the backside of the chassis toconnect external peripheral devices, such as a mouse, a keyboard, a monitor,serial devices or parallel printer etc. Before connection, make sure that thecomputer and the pe...

Page 11 - LAN Port

11 11 P0715 Quick Installation USB Ports P0715 provides four external USB ports to connectto external USB devices. USB ports and devicesare hotplug capable. Therefore any USB device canbe connected at all time without the need to powerdown your system. Note that for many of thesedevices you will fir...

Page 12 - Hardware Installation; HDD installation

12 P0715 Quick Installation Hardware Installation HDD installation 1. On the back of P0715, locate the screws that secure the rear case. Use screw driver to remove the screws. Keep the screws safely for later use. Pull the baffle slightly upward the main unit until it is disen- gaged from main unit....

Page 13 - Note: Beware of the directions when wiring HDD and IDE cable.

13 13 P0715 Quick Installation 4 4 p i n I D E C a b l e 2 . 5 " H D D P i n 1 Note: Beware of the directions when wiring HDD and IDE cable. Pin 1

Page 14 - Panel PC Installation

14 P0715 Quick Installation Panel PC Installation 1. In 2.4B or above Driver, choose Drivers & Utili- ties.

Page 15 - Panel Computing

15 15 P0715 Quick Installation 1.1 Select Panel Computing .

Page 19 - Promote Touch Driver

19 19 P0715 Quick Installation 4. Select Promote Touch Driver to install.