Intel 4.0A - Manual
Intel 4.0A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Restore Procedure
- Page 4 – Installing ATI 3D Rage Pro* Display Driver
- Page 8 – The second channel line is busy.
TeamStation™ System 4.0 and 4.0a
Installation & Use
System 4.0
Restore Procedure
Use the restore procedure to configure the Intel® TeamStation™ System to its
factory-installed configuration.
WARNING!
This procedure will erase all of the files on the disk, including the Intel
TeamStation System directory of numbers, any documents stored on the system
with the Intel TeamStation Document Server, and any applications and their data.
You will need to copy files and data that you want to keep to diskette, network drive,
etc. before beginning the restore procedure.
NOTE:
Only the System Administrator should perform the restore procedure. (This process takes approximately
two hours.)
To perform the system restore procedures have the following items ready:
1. Contents of the "System Restore Packet"
a. Intel TeamStation System Restore floppy diskette
b. Intel TeamStation System Restore CD
c. Intel TeamStation System Restore Procedures document
2. Microsoft W indows NT* 4.0 W orkstation CD
3. Microsoft W indows NT* 4.0 Certificate of Authenticity (located on the cover of the W indows NT manual)
WARNING!
This procedure will erase all of the files on the disk, including the Intel TeamStation System directory
of numbers, any documents stored on the system with the Intel TeamStation Document Server, and any
applications and their data. You will need to copy files and data that you want to keep to diskette, network drive,
etc. before beginning the restore procedure.
Before performing the Recovery Procedure:
1. Back-up on secondary storage any important data files that are on the hard disk. Note: The first step of
the recovery process is to format the hard disk which will erase all current data on the hard disk!
2. Have ready the Microsoft W indows NT* 4.0 Certificate of Authenticity (COA). This number is located on
the cover of the W indows NT 4.0 manual which came with the Intel TeamStation System. If you can not
locate the COA number, do the following before using the Recovery disks:
a. Right-click on the My Computer icon and select Properties.
b. On the General tab, record the number listed under the 'Registered to:' field. The format of this
number is XXXXX-OEM-XXXXXXX-XXXXX. This is the COA number that will be prompted for
during the recovery process.
3. Follow and complete the Intel TeamStation System Restore Procedures. If the Intel TeamStation System
4.0 Restore Procedures document cannot be located it can be downloaded.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
System 4.0a Restore Procedure In the event of a problem that makes the hard drive of the Intel® TeamStation™ System 4.0a unusable, the system administrator can reload the base Intel TeamStation System software. This process takes approximately 45 minutes. For the restore process, you will need: • In...
8. Highlight ‘TCP/IP Protocol’ and click ‘OK’. 9. If a DHCP (Dynamic Host Control Protocol) server is available and DHCP will be used click ‘Yes’ at the prompt. If a static IP address will be used click ‘No’ at the prompt. 10. Insert the Microsoft W indows NT 4.0 CD. 11. W hen setup will prompts for...
MultiFrame Alignment (Aligning communications) (First, Second, Third and fourth rows turn Green) If CRC errors continue to occur, the Fourth row will turn red (Rows 1, 2, and 3 will all be green) This indicates a problem on the ISDN line. If there are transmit errors (the system receives notificatio...
