Page 2 - User Guide
GB2.book : GB2.fro i Tue Oct 27 13:01:06 1998 1000SX Module and1000LX Modulefor 500 Series Switches User Guide 715236-001
Page 4 - Quick Start; CLASS 1
GB2.book : GB201 1 Tue Oct 27 13:01:06 1998 1 1 Quick Start Warning for 1000SX This product contains fiber-optic ports. For Optical Safety,never look directly at the fiber TX laser port and fiber cable endswhen they are powered-up. Warning for 1000LX This product contains fiber-optic ports. For Opti...
Page 5 - This Quick Start covers two products:; Express 500 Series Switch:; Warning
GB2.book : GB201 2 Tue Oct 27 13:01:06 1998 C H A P T E R 1 Quick Start 2 Naming in this Quick Start This Quick Start covers two products: • 1000SX Module for 500 Series Switches • 1000LX Module for 500 Series Switches To differentiate these modules from other modules in the text, weshall refer to b...
Page 6 - Note
GB2.book : GB201 3 Tue Oct 27 13:01:06 1998 3 C H A P T E R 1 Quick Start 3 Remove the plate covering expansion slot A, unless the switchis in or to be used in a stack with redundancy. Note For a stack with redundancy, install the module on the sameside of the switch as the Matrix Module it is to be...
Page 8 - This User Guide covers two products:
GB2.book : GB202 5 Tue Oct 27 13:01:06 1998 2 5 1000SX and 1000LXModules Naming in this User Guide This User Guide covers two products: • 1000SX Module for 500 Series Switches • 1000LX Module for 500 Series Switches To differentiate these modules from other modules in the text, weshall refer to both...
Page 9 - Introduction; This module operates in two modes.; To install the module, follow the instructions in Chapter 1.
GB2.book : GB202 6 Tue Oct 27 13:01:06 1998 C H A P T E R 2 1000SX and 1000LX Modules 6 Introduction Two modes This module operates in two modes. • Stack mode (default setting): Used when the switch containing this module is connected to agroup of switches (or stack) via a Matrix Module. The two Sta...
Page 10 - Module LEDs; Status
GB2.book : GB202 7 Tue Oct 27 13:01:06 1998 7 C H A P T E R 2 1000SX and 1000LX Modules Module LEDs Understanding the LEDs The 1000Base Module has three connectors. Each connector has twoLED indicators: Note The green LED for the 1000Base-SX/1000Base-LX SIMconnector remains solid when there is a lin...
Page 12 - Device View resets the
GB2.book : GB203 9 Tue Oct 27 13:01:06 1998 3 9 Configure the moduleand connect the cables Introduction The configuration and cabling of the 1000Base Module are veryclosely linked. Only after both processes are complete will the switchfunction properly. Note When the module mode is changed, the conf...
Page 13 - Configuring the Module
GB2.book : GB203 10 Tue Oct 27 13:01:06 1998 C H A P T E R 3 Configure the module and connect the cables 10 Configuring the Module To change the modulemode using Intel DeviceView The default setting for the Module Mode is Stack Mode. With theswitch containing the 1000Base Module displayed in the Dev...
Page 14 - Cabling the Module
GB2.book : GB203 11 Tue Oct 27 13:01:06 1998 11 C H A P T E R 3 Configure the module and connect the cables Cabling the Module Introduction The cable connections to the module depend on the mode in whichthe module is to be used. Stand-alone Mode Cabling for a single switch Follow these instructions ...
Page 15 - Stack Mode
GB2.book : GB203 12 Tue Oct 27 13:01:06 1998 C H A P T E R 3 Configure the module and connect the cables 12 Stack Mode Cabling to a MatrixModule in a group ofswitches The 1000Base Module is installed in a different switch from the Ma-trix Module, so the cabling process is in two parts; the switch co...
Page 16 - Redundancy is not possible with the 510T.
GB2.book : GB203 13 Tue Oct 27 13:01:06 1998 13 C H A P T E R 3 Configure the module and connect the cables 5 Plug the SC connectors on the optic fiber cable into the RX andTX sockets, and connect the other end of the cable to a device. 6 Check the LEDs on the 1000Base Module to verify the links.For...
Page 18 - Link Aggregation with Two Modules
GB2.book : GB203 15 Tue Oct 27 13:01:06 1998 15 C H A P T E R 3 Configure the module and connect the cables 7 Repeat steps 2 through 6 for the second 1000Base Module,ensuring that the cabling from this 1000Base Module goes tothe other Matrix Module. 8 Plug the SC connectors on the fiber optic cables...
Page 22 - Specifications; The 1000SX Module has the following specifications:; Dimensions
GB2.book : GB204 19 Tue Oct 27 13:01:06 1998 4 19 Specifications 1000SX Physicalspecification The 1000SX Module has the following specifications: Number of ports: Three: 2 x Stack Interface Moduleand 1 x 1000Base-SX Connector Types: Stack Interface Module1000Base-SX 26-position shielded plugDuplex S...
Page 24 - Limited Hardware Warranty
GB2.book : legal 21 Tue Oct 27 13:01:06 1998 A 21 Limited HardwareWarranty Limited Hardware Warranty Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material andworkmanship for three (3) years following the latter of: (i) the date...
Page 27 - Federal Communications Commission (FCC) Statement
GB2.book : legal 24 Tue Oct 27 13:01:06 1998 24 A P P E N D I X A Limited Hardware Warranty Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCCRules. These limits are designe...
Page 28 - WARNING
GB2.book : legal 25 Tue Oct 27 13:01:06 1998 25 A P P E N D I X A Limited Hardware Warranty WARNING The system is designed to operate in a typical office environment. Choose a site that is: • Clean and free of airborne particles (other than normal room dust). • Well ventilated and away from sources ...
Page 29 - AVVERTENZA; ADVERTENCIAS
GB2.book : legal 26 Tue Oct 27 13:01:06 1998 26 A P P E N D I X A Limited Hardware Warranty Das System darf weder an eine Stromquelle angeschlossen sein noch eine Verbindung mit einer Telekommunikationseinrichtung,einem Netzwerk oder einer Modem-Leitung haben, wenn die Gehäuseabdeckung entfernt wird...
Page 30 - Automated Support; WWW
GB2.book : legal 27 Tue Oct 27 13:01:06 1998 27 A P P E N D I X A Limited Hardware Warranty Automated Support You can reach Intel ® Automated Support Services 24 hours a day, every day at no charge. The services contain the most up-to-date in-formation about Intel products. You can access installati...
