INSTEON 2845-222 - Manual

6 If you skip linking now, you can link later using Five-Tap linking. Test the Fit Drill the Hole Link First Locate the Hole Installation As installing Door Sensor obscures its set button, perform any linking now before you install the sensor. For linking instructions, turn to Page 9. Find a locatio...

7 Using the Spacer If the gap between your door and door frame is too wide to depress the contact plunger, try using the spacer. Slide the spacer over Door Sensor to increase the thickness of the collar. Fasten with the screw provided. D oor S ensor M odel: 2845-222

8 Insteon devices can stand alone and function as a local switch or dimmer, but their real power comes when they are connected together to form a control system. Most Insteon devices can control one another and be the recipient of control. The process of associating multiple Insteon devices to one a...

9 D oor S ensor M odel: 2845-222 Linking to the Insteon Hub 2 Tap the Add button. 1 3 4 From Rooms, navigate to All Devices. Select Door Sensor from the list of devices. When prompted, press and hold the set button on your Door Sensor until the device beeps. Rooms All Devices Check-In Favorites Bath...

10 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 Linking to Control Another Device 2 Adjust your responder to the desired state: On, off, or brightness level if dimming, and then press and hold the set button until the device double-beeps. 1 On your Door Sensor, press and hold the se...

11 Already Installed Linking Link Hidden Door Sensor without removing from your door frame If Your Door Is Already Open If Your Door Is Closed ? ? 1 OR Open your door and press and release Door Sensor’s contact plunger twice. After a pause, Door Sensor will beep. Once in linking mode, you can open o...

12 Already Installed Linking 2 Adjust your responder to the desired state: On, off, or brightness level if dimming, and then press and hold the set button until the device double-beeps. ® ® Your Insteon controller will now control your On/Off Module. D oor S ensor M odel: 2845-222 Link Hidden Door S...

13 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 Multi-Linking or Making a Scene 2 3 4 Adjust your scene members to their desired state: On, off, or brightness level if dimming. Lamp 1 Lamp 3 Lamp 2 Appliance One at a time, press and hold the set button on each scene member until it ...

14 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 Unlinking a Device 1 On your Door Sensor, press and hold the set button until the device beeps. 2 Press and hold the set button again until the device beeps . 3 Press and hold the controlled device’s set button until the device double-...

15 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 Multi-Unlinking or Removing a Scene 2 3 4 Press and hold the set button again until the device beeps. Tap the set button. Press and hold the controlled device’s set button until the device double-beeps. 1...

16 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 Multi-Unlinking or Removing a Scene 5 Tap the set button on your Door Sensor to exit Multi-Unlinking mode. ® ® ® X Your Door Sensor will no longer control your Insteon responders.

17 Encompassing all on-device programming options, use the local programming to set local properties and factory reset. For the best experience, use software for managing device properties. Local Programming Encompassing all on-device programming options, use the local programming to set local prope...

19 Press Exit Local Programming D oor S ensor M odel: 2845-222 Unlinking Mode Multi- Unlinking Mode Linking Mode Multi-Linking Mode Press Ta p Ta p Press Press Tap Tap Exit Exit Exit Exit

20 A factory reset will erase all links stored in the device’s database as well as any customized properties. Factory Reset A factory reset will erase all links stored in the device’s database as well as any customized properties. Factory Reset

21 D oor S ensor M odel: 2845-222 Door Sensor Model: 2845-222 Your Door Sensor has been restored to factory settings. Door Sensor Model: 2845-222 Door Sensor Model: 2845-222 Door Sensor Model: 2845-222 Factory Reset 1 Remove Door Rensor from the door frame and take out the sensor’s battery. 2 Press ...

22 Most Insteon devices contain features that can only be enabled, disabled or modified using Insteon control software such as HouseLinc and an Insteon PowerLine Modem. Software-Only Features Most Insteon devices contain features that can only be enabled, disabled or modified using Insteon control s...

23 Door Sensor Model: 2845-222 D oor S ensor M odel: 2845-222 D oor S ensor M odel: 2845-222 Software-Only Features Enable Group 1 & 2 Broadcast Disable Local Programming Disable LED and Beeper Adjust Heartbeat Interval When enabled, Door Sensor will send a separate On for opening and for closin...

24 Software-Only Features Low Battery Warning Enable or disable a low battery broadcast that can trigger events with software. $ RADIO RADIO SMOKE AND CARBON MONOXIDE ALARM a 1 : 3 0 iOS MANUAL INSTEON Quick Start Guide INSTEON Owner’s Manual This device complies with FCC Rules and Industry Canada l...

25 Everything else you might need to know about your Insteon product. Appendix Everything else you might need to know about your Insteon product. Appendix

26 Specifications General Available Colors White Brand Insteon FCC ID SPB28452 Industry Canada 5202A-28452 Product Number. 2845-222 US 2845-422 EU 2845-522 AUS/NZ Patent Protected under US and Freign Patents (see www.insteon.com/ patents) UPC 813922013092 US 813922013603 EU 813922013610 AUS/NZ Warra...

27 Maximum Scene Memberships 1 Multi-Link Support Yes Multi-Unlink Support Yes Phase Detect Beacon No Radio Frequency 915 MHz US 869.85 MHz EU 921 MHz AUS/NZ Radio Frequency Range 150 feet Scene Commands Supported as Controller On Off Scene Commands Supported as Responder None Software Configurable ...

28 Electrical Battery Type AAA Battery Life 6 months Certification N/A, Battery-powered device Power Consumption 60μA Supply Voltage 1.5V DC (AAA Battery) X10 Features (Powerline Only) X10 Support No Specifications

29 Troubleshooting Door Sensor won’t link to other Insteon Devices Your Door Sensor may be out of range of a dual-band Insteon device or your network may be powerline-only. Try this: • If your Insteon network lacks any dual-band devices, add a Range Extender or other dual-band Insteon device near yo...

30 Certifications and Warnings This device complies with FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference th...

31 Certifications and Warnings It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the envir...

32 Product Warranty Limited Warranty Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the p...