INSTEON 2486Dxxx - Manual
INSTEON 2486Dxxx – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – KeypadLinc – Features and Benefits; Features
- Page 4 – Installing KeypadLinc; Tools Needed; Flathead screwdriver; Button Naming
- Page 5 – Installation – Circuit with 1 Switch; KeypadLinc’s button LED and connected load will turn on and off.; KeypadLinc Wire
- Page 6 – Installation – Circuit with 2 Switches
- Page 7 – Installation – Circuit with 3 (or more) Switches; The following
- Page 9 – Using KeypadLinc; LEDs
- Page 10 – Setting Up INSTEON Scenes; Add KeypadLinc Button to a Scene as a Controller; KeypadLinc’s Scene button LED will blink; Remove KeypadLinc Button from a Scene as a Controller; HouseLinc
- Page 11 – Remove Multiple Responders from a Scene; Add KeypadLinc Button to a Scene as a Responder; Changing Button Modes; Toggle
- Page 12 – a. If you wish to rotate button mode again, return to step 2; LED Brightness; Power Restore; ) Press and hold KeypadLinc’s Set button again until it beeps again; Advanced X10 Programming
- Page 13 – Advanced Features; Add Multiple Scene Responders; Example: 2 Switch Circuit
- Page 14 – Example: Synchronized Scene with numerous members; Beep on Button Tap or Press; If KeypadLinc in 6-Button Configuration; will
- Page 15 – “Radio” Button Groups (only 1 LED of “N” at a time – software recommended)
- Page 16 – Part 2 Radio Button Groups; Air Gap; Pull Set button out (creating an Air Gap)
- Page 17 – Changing Between 6 and 8 Button Configurations; Changing to 6-Button Configuration
- Page 18 – Changing Buttons; Additional Resources; Helpful Videos; Changing KeypadLinc Buttons
- Page 19 – Optional Accessories; Specifications; button
- Page 21 – Troubleshooting; Problem; products
- Page 22 – power line noise filter
- Page 23 – Install
- Page 24 – Certification and Warranty
Page 1 of 24
Rev: 1/21/2014 7:36 AM
KeypadLinc™ Dimmer
INSTEON
®
6- and 8-Button Scene Control Keypad with Dimmer
Owner’s Manual, Rev 5.0+
(#
2486Dxxx
)
8-button KeypadLinc
6-button KeypadLinc
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 of 24 Rev: 1/21/2014 7:36 AM KeypadLinc – Features and Benefits Congratulations on purchasing the elegant, high-quality KeypadLinc INSTEON/X10 scene controller. This intuitive keypad controls up to 6/8 scenes and has a built-in dimmer to create dramatic whole-room changes at the tap of a butt...
Page 4 of 24 Rev: 1/21/2014 7:36 AM Installing KeypadLinc CAUTIONS AND WARNINGS Read and understand these instructions before installing and retain them for future reference. This product is intended for installation in accordance with the National Electric Code and local regulations in the United S...
Page 5 of 24 Rev: 1/21/2014 7:36 AM Installation – Circuit with 1 Switch 1) At electrical panel, turn off circuit breaker(s) and/or remove fuse(s) feeding wall box. Verify that the power is off before continuing. 2) Remove wallplate from the switch. Unscrew switch and gently pull out. 3) Disconnect ...
