INSTEON 2443-522 - Manual
INSTEON 2443-522 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Features and Benefits; In the Box; Before Installation
- Page 4 – Identify Switch Type
- Page 5 – Installation
- Page 6 – Switch Operation Mode; Change to Single Momentary Mode
- Page 7 – Local Control Operation
- Page 8 – Adjust Local Settings; Error Blink
- Page 9 – INSTEON Setup; controller
- Page 10 – Make Micro Module a Controller (Set button)
- Page 13 – Add X10 Address; Remove X10 Address
- Page 14 – Specifications
- Page 17 – Troubleshooting; Problem
- Page 18 – Stuck/Disabled Button
- Page 19 – Phase Bridge Detect Beacon/RF Range Test
- Page 20 – Certification and Warranty
Page 1 of 21
2443-222/2443-422/2443-522 - Rev: 1/21/2014 8:28 AM
Micro On/Off
Owner’s Manual
2443-222 (US)
2443-422 (EU)
2443-522 (AUS/NZ)
North America
EU/AUS/NZ
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 of 21 2442-222/2442-422/2442-522 - Rev: 1/21/2014 8:28 AM About Micro On/Off Features and Benefits - Wires in behind existing wall switch or outlet or in a fixture box (requires neutral wire) - Compatible with latching, single momentary and dual momentary switches - Sense wires allow local co...
Page 4 of 21 2443-222/2443-422/2443-522 - Rev: 1/21/2014 8:28 AM Identifying the Electrical Wires in Your Home (North America only) - Line: usually black (may also be called hot, live or power), carries 120VAC electricity into the wall box - Neutral: usually white or white wire bundle, commonly dais...
Page 5 of 21 2443-222/2443-422/2443-522 - Rev: 1/21/2014 8:28 AM Installation 1) Write down the INSTEON ID found on the back of the unit (XX.XX.XX) 2) Turn off breaker/fuse and verify that the power is off 3) Disconnect wires from existing switch, fixture or outlet and prep all wires to be connected...
