Page 3 - About INSTEON Hub; Features and Benefits; Control your entire INSTEON network; Installation; CAUTIONS AND WARNINGS
Page 3 of 26 Rev: 9/27/2013 4:17 PM About INSTEON Hub INSTEON Hub makes adding customizable, fully dimmable INSTEON remote control to your lamps as easy as plug and play. It’s home control at its simplest and most convenient. Features and Benefits x Control your entire INSTEON network x Receive clou...
Page 4 - In the Box; Getting Started; only; Option 1: Use Hub with Smartphone/Tablet; Hub; What you’ll need
Page 4 of 26 Rev: 9/27/2013 4:17 PM In the Box Tools Needed Accessories INSTEON Hub Android or iOS smartphone or tablet INSTEON devices and sensors Power Cord INSTEON IP Camera Ethernet Cord Quick Start Guide Getting Started Connect Hub to router using only the included Ethernet cable. Then connect ...
Page 6 - Account Creation; Login Selection Screen; Select this if you do not already have an INSTEON Hub account
Page 6 of 26 Rev: 9/27/2013 4:17 PM Account Creation Login Selection Screen The first screen in the app when launching the application is the Login Selection Screen. You can select between one of the following: 1) Create New Account x Select this if you do not already have an INSTEON Hub account 2) ...
Page 7 - Create Account; Login; Stay signed in
Page 7 of 26 Rev: 9/27/2013 4:17 PM Create Account Below are the following fields that the user will have to complete to create the account: x Email* – the user's email address where they would like to receive alerts and notifications from the application, cloud service or device activations; this i...
Page 8 - Hub Set Up; Troubleshooting; Remote Access Setup
Page 8 of 26 Rev: 9/27/2013 4:17 PM Hub Set Up After you have successfully created an account, the mobile application will begin the installation wizard for the Hub. If during this process you have any problems please see Troubleshooting section for Hub Setup. Remote Access Setup If you would like t...
Page 9 - Using INSTEON App; Navigation Bar; Navigation bar without thermostat:; Favorites
Page 9 of 26 Rev: 9/27/2013 4:17 PM Using INSTEON App Navigation Bar Navigation bar without thermostat: Navigation bar with thermostat: Favorites A customizable display for any devices you wish to have at your fingertips. Add lights, cameras, sensors and see them all in one alphabetically organized ...
Page 10 - Device and Sensor Status Indicators; Spinning; Getting status; Green; Device is on; White; Device is off / sensor is “OK”; Red; Sensor is activated; Yellow; Status is unknown
Page 10 of 26 Rev: 9/27/2013 4:17 PM Device and Sensor Status Indicators Spinning Getting status Green Device is on White Device is off / sensor is “OK” Red Sensor is activated Yellow Status is unknown
Page 11 - Devices
Page 11 of 26 Rev: 9/27/2013 4:17 PM Devices To control a device, click on its icon. If you have more than nine devices, use your finger to swipe to the other pages. Tap All Devices to see every device in your home. Tap a device icon to control that device.
Page 12 - Full Device Control; Current status
Page 12 of 26 Rev: 9/27/2013 4:17 PM Control pop-up Full Device Control Choose between turning the device on or off. Tap + to enter the full device control screen for dimming and brightening. Tap in the background area to close the popup. On/Off control. Double-tapping On or Off for dimmers will ins...
Page 13 - Device name
Page 13 of 26 Rev: 9/27/2013 4:17 PM Device Settings Name Device name Icon Device icon Room Memberships Add to rooms, view room memberships Scene Memberships Add to scenes, view scene memberships Schedule Set a timer for the device Alerts Receive an alert (text message/email) when the device is acti...
Page 14 - Example of the On-Level and Ramp Rate adjustments:; Thermostat; Thermostat Control
Page 14 of 26 Rev: 9/27/2013 4:17 PM Example of the On-Level and Ramp Rate adjustments: Thermostat Thermostat Control Use the up and down arrows to adjust your thermostat set points. * Available for INSTEON devices shipped after March 2013 ** Dimmable devices only
Page 15 - Rooms; ** Not currently supported for INSTEON Venstar Adapter
Page 15 of 26 Rev: 9/27/2013 4:17 PM Thermostat Edit Rooms Add a Room 1) Tap the Rooms button and Add 2) Give the new room a name, then tap Done 3) Select the room icon, then tap Add 4) Select a device or scene to add to room, when finished tap Done Schedules Devices and scenes can be activated base...
Page 16 - Time of Day; Scenes; Scene Troubleshooting; Add a Scene; Member Type
Page 16 of 26 Rev: 9/27/2013 4:17 PM 4) Tap Done 5) Next select Off Time and select x Time of Day Or x Sunrise/Sunset 6) Tap Done 7) Select the days that you would like the timer to run by tapping on each day. By default, the entire week is pre-selected for you. 8) When finished tap Save to save you...
Page 17 - ) When finished tap Save Scene
Page 17 of 26 Rev: 9/27/2013 4:17 PM 5) Adjust the scene member response by tapping the green button or use the current state displayed. 6) If you wish to also activate the scene from another INSTEON device (motion sensor, keypad, switch, etc.) tap the blue Responder button. If the button is grayed ...
Page 18 - Accessing Your Scene
Page 18 of 26 Rev: 9/27/2013 4:17 PM Accessing Your Scene Scene Control Edit Scene In the Scene view, tap a scene to access the control screen Scene control differs from regular device control since devices within a scene may be set to turn off when the scene is turned on (activated). All devices wi...
Page 19 - Scene name; Icon; Device icon; Schedule; Set a timer for the scene; Members
Page 19 of 26 Rev: 9/27/2013 4:17 PM Scene name Device name Icon Device icon Room Memberships Add to rooms Schedule Set a timer for the scene Members Displays all memberships of the scene. Tap on a device to edit the state or tap the trash can icon to remove from the scene.
Page 20 - Account Troubleshooting; to a website through the mobile device’s browser.; Hub Setup Troubleshooting; Make sure “Airplane Mode” is turned off for the mobile device.
Page 20 of 26 Rev: 9/27/2013 4:17 PM Schedule Schedule To create a schedule for your scene, please refer to the Schedules section of this manual. Troubleshooting Account Troubleshooting Unable to Create Account x Verify that the mobile device is connected to Wi-Fi and has an external connection to t...
Page 21 - LED will begin blinking green; Factory Reset; Delete Account
Page 21 of 26 Rev: 9/27/2013 4:17 PM The web browser should show the Hub located at the URL above. Clicking on the IP address should access the Hub. NOTE: If you see multiple entries, locate the correct Hub by INSTEON ID, printed on the underside of the Hub o Verify that the Hub was given an IP ad...
Page 22 - INSTEON Hub will begin to emit a long beep
Page 22 of 26 Rev: 9/27/2013 4:17 PM 1) Remove power from INSTEON Hub 2) Press and hold INSTEON Hub set button. Do not let go. 3) While continuing to press and hold the set button, re-apply power to INSTEON Hub INSTEON Hub will begin to emit a long beep LED will turn red 4) After beep stops, release...
Page 23 - Specifications
Page 23 of 26 Rev: 9/27/2013 4:17 PM Specifications General Product name INSTEON Hub Brand/manufacturer INSTEON Manufacturer product number 2242-222 US 2242-422 Europe 2242-442 UK 2242-522 AUS/NZ UPC 813922012934 US 813922012941 Europe 813922012958 UK 813922012985 AUS/NZ Warranty 2 years, limited IN...
Page 24 - Certification and Warranty
Page 24 of 26 Rev: 9/27/2013 4:17 PM X10 minimum receive level 20mV into 5 Ohms X10 messages repeated No Mechanical Mounting Wall Mount Wires N/A Screw clamp connections N/A Case color White Set button 1 Plastic UV stabilized polycarbonate Beeper Yes LED 1, RGB Dimensions 7” H x 4” W x 1.5” D (17.8c...
