Impecca MIWA05KM15974 - User Manual

Page 2 - de su unidad de aire acondicionado.; To avoid permanent damage to unit:; Spanish version of this manual available for download on

Read the following notices and information carefully to ensure proper operation of your air conditioner unit. This manual is solely provided for informational purposes and in no way constitutes a legally binding document between the manufacturer, distributor, and end consumer. Exact appear- ance of ...

Page 3 - ENGLISH; –iii–; TABLE OF CONTENTS

ENGLISH –iii– TABLE OF CONTENTS Introduction ..............................................................................................................................6Getting To Know Your Air Conditioner ..................................................................................7Using Yo...

Page 4 - READ THESE NOTICES CAREFULLY—THEY ARE IMPORTANT!

ENGLISH –4–  Plug in power plug completely.  Do not start or stop the unit by inserting or pulling out the power plug.  Do not damage power cord or replace with a non-original power cord. • Otherwise, it may cause electric shock or fire due to potential short circuit. • It may cause electric shoc...

Page 6 - INTRODUCTION; SAFETY INFORMATION

ENGLISH –6– INTRODUCTION Thank you for purchasing this quality Impecca window air conditioner unit. To ensure the longest life and highest energy efficiency of your unit, please carefully follow these operating instructions. Keep these instructions in a safe place and consult them as needed. Please ...

Page 7 - OPERATING CONDITIONS; GETTING TO KNOW YOUR AIR CONDITIONER; al levers; USING YOUR AIR CONDITIONER; moving odors from the room during fan mode.

ENGLISH –7– OPERATING CONDITIONS • The air conditioner must be operated within the temperature range of 62°F to 95°F (16°C to 35°C). • A perimeter of 12′′(30cm) around the air conditioner should be free of all objects.• Keep air inlet and air outlet clean and free of obstructing objects.• During ope...

Page 8 - OVERVIEW OF CONTROLS FUNCTIONS; Note that your model's control panel may differ; Control Panel

ENGLISH –8– OVERVIEW OF CONTROLS FUNCTIONS Before you begin, thoroughly familiarize yourself with the control panels as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit control panel located on the front of the device or w...

Page 9 - TEMPERATURE ADJUSTMENT

ENGLISH –9– TEMPERATURE ADJUSTMENT Press or hold either Down  or Up  button until the de- sired temperature is seen on the display. This tempera- ture will be automatically maintained anywhere between 62° F (17° C) and 86° F (30° C).If you want the display to read the actual room tempera- ture, re...

Page 10 - ENERGY SAVER MODE; Note: Your filter may need to be cleaned much more often

ENGLISH –10– PMTS — FOLLOW ME (SOME MODELS) Some models are equipped with a special feature that allows the remote control to act as a thermostat. If your unit shows this PMTS LED on the control panel, and you have the accom- panying LCD remote control then your unit is equipped. You must activate t...

Page 11 - AUTO ON INSTRUCTIONS:; AUTO OFF INSTRUCTIONS:; TIMER

ENGLISH –11– DELAY START/STOP (TIMER) The timer buttons enable two separate functions: one to automatically start the unit within a 24 hour period of time and another to automatically turn off the unit within a 24 hour period of time. These functions are called, respectively, AUTO ON and AUTO OFF. A...

Page 12 - PRE-INSTALLATION INSTRUCTIONS; Air conditioning unit

ENGLISH –12– 1 2 3 7 9 8 11 4 3 5 6 10 Phillips Screwdriver Level Scissors Pencil Tape Measure PRE-INSTALLATION INSTRUCTIONS REQUIRED TOOLS (NOT INCLUDED) INCLUDED PARTS & ACCESSORIES* 1. Air conditioning unit 2. Flexible window filler panels 3. Upper Rail (may already be attached) 4. Upper Rail...

Page 13 - WINDOW REQUIREMENTS; Your air conditioner is designed; STORM WINDOW MODIFICATIONS; Wooden Windows

ENGLISH –13– WINDOW REQUIREMENTS Your air conditioner is designed to install in a standard double hung windows with opening widths of 23 to 36 inches (584mm to 914mm). *For 6000 and 8000 BTU models, you need a height of 14 inches (356mm). For 10,000 and 12,000 BTU models, you need a height of 15½ in...

Page 14 - INSTALLATION INSTRUCTIONS; STEP 2: MOUNTING THE FLEXIBLE FILLER PANELS; Note the “Left” and “Right” markings on the panels.

ENGLISH –14– INSTALLATION INSTRUCTIONS  Use caution when unpacking and installing. Sharp edges can cause injury. Appearance of unit in these diagrams is for illustrative purposes only and may not precisely reflect your unit’s design. STEP 1: INSTALLING THE UPPER RAIL (IF NOT ALREADY ATTACHED) 1. Yo...

Page 15 - STEP 3: FOAM SEAL ON WINDOW FRAME

ENGLISH –15– STEP 3: FOAM SEAL ON WINDOW FRAME • Affix the foam seal (with adhesive G ) to the bottom of the window sash. STEP 4: MOUNT THE UNIT IN THE WINDOW FRAME 1. With the help of another person, center the unit on the windowsill. The lower rail should be completely flush with the windowsill. G...

Page 16 - STEP 5: SECURING THE WINDOW; side; STEP 6: INSULATING FOAM SASH SEAL; R1 INSULATION INSTALLATION (FOR SOME MODELS); WEATHER STRIPPING

ENGLISH –16– STEP 5: SECURING THE WINDOW • To keep the window from being unintentionally opened and risk damaging the unit or injuring passersby, use one type C screw to fasten the se-curity bracket to the window. If your window frame is plastic (PVC), fasten the bracket to the side of the window fr...

Page 17 - R1 SIDE CURTAIN COVER INSTALLATION (SOME MODELS); filler panel as shown in the diagram.; or

ENGLISH –17– R1 SIDE CURTAIN COVER INSTALLATION (SOME MODELS) 1. After the unit is installed in the window, measure the width of each side's exposed filler panel as shown in the diagram. 2. Cut the insulation panel to size for each side of the side curtain. 3. Slide the R1 panel into place 1 2 3 4 5...

Page 18 - CLEANING & MAINTENANCE; SAFETY WARNING; lowing verifications:; • WARNING; damage the compressor.; DISPOSAL INFORMATION; local recycling guidelines.

ENGLISH –18– CLEANING & MAINTENANCE SAFETY WARNING To avoid electric shock, fire, damage, or injury while performing maintenance on your unit: • Always turn off and disconnect the air conditioner from electric power.• Never submerge the unit in water or spray liquids directly on the unit.• Never...

Page 19 - CLEANING THE OUTER HOUSING AND INTAKE GRILLE; with warm, soapy water. Use a soft brush to clean off the grille.; CLEANING THE FILTER; in dusty environments may require more frequent filter cleaning.; TROUBLESHOOTING; from cooling the room to even lower temperatures.; INSUFFICIENT COOLING

ENGLISH –19– CLEANING THE OUTER HOUSING AND INTAKE GRILLE If dust has accumulated on the unit, use a soft, dry dusting cloth to wipe it off. If grease or other harder to remove substances is on the unit, use a wrung-out cloth dampened with warm, soapy water. Use a soft brush to clean off the grille....

Page 20 - • This is often caused by heat expansion in the plastic parts.

ENGLISH –20– WATER BUILD-UP IN THE UNIT, SPLASHING NOISE • This is not a problem. This self-evaporative unit is designed allow condensate to build up in the rear of the unit during cooling and dry modes. The rear fan then runs through the pool of water, splashing it upon the evaporator coils, helpin...

Page 21 - ELECTRICAL INFORMATION

ENGLISH –21– ELECTRICAL INFORMATION • 115 Volts, 60Hz, 1Ph• Power cord length: 6.5’• Plug Face: 5-15P CUSTOMER SUPPORT Before contacting customer support, please see the troubleshooting guide above. Upon unpacking your air conditioner, please be sure to write down the model and serial number of your...

Impecca MIWA05KM15974 - User Manual

Table of Contents:

Summary

Other Impecca Air Conditioners Models