IDEAL 61-686 - Manual
IDEAL 61-686 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – OPERATING THE METER; Press the “ “ button to turn the power on or off; ZEROING THE METER; button to automatically zero the reading.
- Page 5 – CLEANING AND STORAGE; to the operating and storage range in the specifications chart); RELATIVE SPECTRAL SENSITIVITY; Peak sensitivity wavelength: 550nm; *CIE luminous spectral luminous; rights which vary from state to state.
- Page 6 – Luxómetro; Instrucciones de operación; durante la medición
- Page 8 – OPERACIÓN DEL INSTRUMENTO; Pulse el botón “ “ para encender o apagar la unidad.; PUESTA A CERO DEL INSTRUMENTO; un destornillador pequeño hasta que la lectura sea 000.
- Page 10 – SENSIBILIDAD ESPECTRAL RELATIVA; Longitud de onda de sensibilidad pico: 550 nm; αβχδεφγηιφκ
- Page 11 – Luxmètre; Mode d’emploi; des mesures
- Page 16 – GARANTIE; peuvent ne pas s’appliquer dans votre cas.
61-686
Light Meter
Operating Instructions
61-686
Light Meter
LUX/FC
HOLD
MANU
MAX
AUTO
ZERO
IMPORTANT SAFETY INFORMATION
CAUTION
Take extreme care for the following conditions while measuring
• Do not operate the meter in an environment with explosive gas,
combustible gas steam or an area filled with dust.
• If erratic operation occurs please replace the battery immediately.
• In order to avoid damage caused by contamination or static electricity, do
not service the unit.
• Verify the meter is working properly by taking a reading on a known
measurement.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Nbr. of Lumen Area (sq. foot or sq. meter) Nbr. of Lumen = Nbr. of foot (or meter) x area Foot-candle / Lux conversion 1 foot-candle = 10.764 lux 1 lux = 0.09290 foot-candles (sq, foot or sq. meter) OPERATING THE METER 1. Press the “ “ button to turn the power on or off 2. Remove the sensor’s cap ...
5 CLEANING AND STORAGE 1. The white plastic light sensor should be cleaned with a damp cloth when neccessary. 2. When the meter is not in use keep the light sensor covered with the light sensor cap. 3. Remove the battery if the unit is not used for an extended period of time. 4. Store the meter in a...
6 61-686 Luxómetro Instrucciones de operación INFORMACIÓN IMPORTANTE RELACIONADA CON LA SEGURIDAD PRECAUCIÓN Tenga mucho cuidado en caso de producirse las siguientes condiciones durante la medición • No opere el instrumento en un ambiente con gas explosivo, vapor de gas combustible o lleno de polvo....
