IDEAL HeatSeeker 160 - Manuals

#61-846 ND-7521-1 Page 8 of 25 4.2. Image alignment As the visible and thermal cameras are not co-axial the visible and thermal image may need to be aligned. This is usually required when moving to view objects at different distances. 4.2.1. Press Function Key 1 to toggle to the alignment icon . 4.2...

#61-846 ND-7521-1 Page 9 of 25 4.3. Turning the visible image off and on 4.3.1. Press Function Key 2 to toggle to the Visible On icon . 4.3.2. Press the center navigation button to toggle to Visible Off . 4.3.3. Press the center navigation button again to toggle to Visible On . 4.4. Thermal and visi...

#61-846 ND-7521-1 Page 11 of 25 5. Menu structure. Select the menu by pressing Function Key 4. Navigate through the menu using the navigation buttons and press Function Key 3 to select the required option. The highlighted item will have a box around it. Use the up/down buttons to move in the selecte...

#61-846 ND-7521-1 Page 12 of 25 5.1. Infrared settings Emissivity Set the emissivity value between 0.10 and 1.00 using the left/right navigation buttons. Pressing Function Key 3 ( Table) gives a table of emissivity values of common materials from which a selection can be made. Note that if more than...

#61-846 ND-7521-1 Page 13 of 25 5.2. Measurement options This menu enables the selection of options for temperature measurements. The symbols shown below indicate the icons shown for Function Key 1 when the various options are selected. Cursors . Choose from one to four cursors. When more than one c...

#61-846 ND-7521-1 Page 14 of 25 Isotherms .Select “High”, “Low”, or “High & Low” in order to highlight areas of the scene with temperatures within a high (red) or l ow (blue) temperature band. The temperature bands are adjustable by means of Function Key 1 and the navigation keys. Red isotherm B...

#61-846 ND-7521-1 Page 15 of 25 5.3. Camera settings Caption mode Select “On” to enable the addition of a text caption when saving an image. Options will then be displayed when saving an image, to be selected by means of Function Key 2 and Function Key 3. Auto off Select “5 Mins”, “10 Mins”, “20 Min...

#61-846 ND-7521-1 Page 16 of 25 5.4. Audio settings Imager sounds Select “Off” to mute all audible outputs. Voice annotation Select “Individual” to add a voice message to each saved image. Select “Session” to add a voice message at the start of a set of images (A session ends when the imager is swit...

#61-846 ND-7521-1 Page 17 of 25 5.5. Image browser The saved images are shown on the screen with the most recently saved image first. Select the desired image by means of the navigation keys. To display the selected image press Function Key 3. To delete the selected image press Function Key 2, to co...

#61-846 ND-7521-1 Page 18 of 25 5.7. Language selection To select a language move to the relevant flag. When the language is highlighted press Function Key 3 to select. 5.8. Display Settings LCD brightness Select from 1 (low) to 9 (high) to control the screen brightness to save battery power. Zoom A...

#61-846 ND-7521-1 Page 19 of 25 6. Adding captions when saving images 6.1. Voice message When saving an image with Individual Voice Annotation turned on, there is the option of saving a voice message with each image. The screen shots below describe the procedure: a) Do you wish to attach a voice mes...

#61-846 ND-7521-1 Page 21 of 25 Appendix A1. Emissivity Tables Emissivity Look-up Tables in Camera 1.00 0.98 = Human skin 0.95 0.94 = Paint, oil 0.93 = Brick red 0.92 = Concrete 0.90 = Planed Oak Wood 0.85 0.80 0.79 = Oxidized steel 0.78 = Oxidized Copper 0.76 = Sand 0.75 0.70 = Red Rust 0.67 = Wate...

#61-846 ND-7521-1 Page 22 of 25 A2. Full Icon List. Function Key one Cursor one. Cursor two. Cursor three Cursor Four Alignment. Tracking. Area. Isotherm high Isotherm low. Profile horizontal. Profile vertical. Alarm high. Alarm low. . Function Key two Camera off. Camera on. Auto temperature range. ...

#61-846 ND-7521-1 Page 23 of 25 A3. Technical specification Performance Field of View: 20° X 15° Focus: Manual Minimum Focus: 30cm Spectral response: 8µm to 14µm Thermal Sensitivity: NETD 80mK (0.08°C) @ 23°C ambient and 30°C scene temperature. Detector: 160×120 Pixels uncooled microbolometer Measur...

#61-846 ND-7521-1 Page 24 of 25 • Isotherms with temperature difference. • Voice and or text annotation. • Image capture; time and date. • Visual/audio alarm for above/below set temperature values. • Palette selection. • User selectable integration. • Image fusion control: 0 to 100% adjustment on wh...

#61-846 ND-7521-1 Page 25 of 25 Warranty Statement This tester is warranted to the original purchaser against defects in material and workmanship fro two years from the date of purchase. During this warranty period, IDEAL INUSTRIES, INC. will, at its option, replace or repair the defective unit, sub...