Page 2 - Table of contents
2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................
Page 3 - Important safeguards
3 Important safeguards Using the device at temperature below -10º may cause the breakage of the device.Before using, please, heat up the passenger compartment to the recommended temperature!Read carefully through this manual to familiarize yourself with this high-quality car stereo system.Disconnect...
Page 4 - Accessories
4 Accessories HEXAGON NUT 1 PCS MOUNTING BOX 1 PCS LEFT KEY 1 PCS RIGHT KEY 1 PCS METAL BAR 1 PCS CONNECTOR ISO 1 PCS PLAIN WASHER ( =5mm) 1 PCS CARRY CASE 1 PCS GPS EXTERNAL ANTENNA 1 PCS SPRING WASHER ( =5mm) 1 PCS TV ANT WIRE 1 PCS AV IN WIRE 1 PCS SCREW ( 5X5mm) 4 PCS SCREW ( 5X25mm) 1 PCS CUSTO...
Page 5 - Installation/connection; Remove the mechanism transit screw before installation
5 Installation/connection Notes: Choose the mounting location where the unit will not interfere with the normal driving function of thedriver.Before finally installing the unit, connect the wiring and make sure that the unit works properly.Consult with your nearest dealer if installation requires th...
Page 7 - Dismantling the unit
7 9. To further secure the unit, use the supplied metal strapto secure the back of the unit in place. Use the suppliedhardware (Hex Nut (M5mm) and Spring Washer) toattach one end of the strap to the mounting bolt on theback of the unit. If necessary, bend the metal strap to fityour vehicle's mountin...
Page 8 - REMOVING AND PROTECTING DETACHABLE FRONT PANEL
8 2. DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow this mounting instruction. Use the screw holes marked T (Toyota), N(Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied withyour vehicle. Fasten the unit to the factory...
Page 9 - TO ATTACH THE FRONT PANEL
9 2. Pull off the front panel from the main unit.Store the front panel in the protective case provided for safe keeping. TO ATTACH THE FRONT PANEL First fasten the right side of the front panel onto the bracket of main unit. Then slightly pushthe left side of the front panel to attach the main unit....
Page 10 - Electrical Connection; after braking the car.
10 Electrical Connection Note: The parking wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car.
Page 11 - Connecting the reversing line to taillight on the car
11 Connecting the reversing line to taillight on the car After connecting, when you start up the reverse gear, the unit will receive the picture from car rear viewcamera.
Page 12 - Unit controls; Front panel
12 Unit controls Front panel 1. POWER/MUTE button2. MENU button3. RELEASE button4. AF/REG button5. EJECT button6. TA button7. BAND button8. DISPLAY button9. AS/PS button10. PTY button11. USB jack12. PLAY/PAUSE button13. IR sensor14. Touch screen15. AV in jack16. VOL+/VOL-, PREVIOUS/NEXT buttons17. S...
Page 13 - Inner panel
13 Inner panel 18. Card slot for GPS Map card19. Disc slot20. LED indicator21. RESET button22. SD/MMC Memory card slot
Page 14 - Remote control
14 Remote control 1. POWER/LIGHT button 2. MODE/SMART button 3. SETUP button 4. SUB-T button 5. ANGLE button 6. PREVIOUS/NEXT, FAST REWIND/ FAST FORWARD/Cursor buttons 7. ENTER button 8. DISPLAY button 9. ZOOM button 10. BAND button11. Digit buttons12. 9/PTY button13. 7/TA button14. 8/AF/REG button1...
Page 15 - Changing the battery
15 25. AUDIO button26. PLAY/PAUSE button27. STEP button28. STOP button29. GOTO/AS/PS button30. PROGRAM/LO/DX button31. RDM/MO/ST button32. A-B button Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 lithium battery, type CR2025 (3V) bat...
Page 16 - General operations; Reset the Unit; will erase some memorized functions.; Turning the Unit On/Off
16 General operations Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the frontpanel at first, and then press RESET button on the inner panel of the unit with a pointed object, (such as aballpoint pen) to set the unit to initia...
Page 18 - or after a second pressing of EJECT button.; To adjust the angle of TFT Screen
18 Dual zone Pressing and holding SMART/MODE button on the RC, you can turn on or off the dual zone playing mode.After turning on dual zone playing mode, press SMART/MODE button to select the playback mode for rearzone: MEDIA => TV => AV1 => AV2. Last Position Memory During the media playba...
Page 19 - Using the touch screen control; To access the main control interface; on the; To access the tools setup interface; on the touch
19 Using the touch screen control The Touch Screen Control allows fingertip control of virtually all functions. Alternatively, you could alsooperate with ease with the user-friendly integrated big function buttons that are prominently visible. To access the main control interface In every playback m...
Page 26 - Note; : the DVD system setup is only available in video mode.
26 Aim at the “+” and click it, the symbol will moves around the touch screen, click it five times, system willfinish calibration automatically and exit calibration mode. If the calibration setting has been finished, the interface will pop up or the following window will appear. Touch the screen onc...
Page 28 - System Setup
28 System Setup 1) TV SYSTEMTV SYSTEM is used to select the TV output mode. This car DVDplayer can play discs recorded in either PAL or NTSC formats. Select NTSC format when need NTSC signal on the extramonitor.Select PAL format when you need PAL signal on the extramonitor.You can also choose AUTO S...
Page 31 - Digital Setup
31 Digital Setup When you open the digital setup page, you will see the DIGITALSETUP screen:1). OP MODE: Change among LINE OUT/RF REMOD. LINE OUT: LINE OUT mode, with digital dialognormalization.RF REMOD: RF REMODULATION mode, with heavycompression and digital dialog normalization. 2). DYNAMIC RANGE...
Page 32 - Radio Operations; To switch to radio mode; radio mode. Or click the icon; To select a radio band; : to make it possible to use RC, switch joyswitch to SYS mode.
32 Radio Operations To switch to radio mode Briefly press the SOURCE button on the unit or press the SOURCE/SRC on the remote control to select the radio mode. Or click the icon on the touch screen to select the radio mode. The radio control interface will pop up. To select a radio band In radio mod...
Page 36 - Segment “AF” flashing:
36 Program name is displayed on receiving a RDS station. “AF” starts blinking if the broadcasting signals gettingworse.There are 3 state the segment AF on the TFT display: Segment “AF” off: AF switching mode off. Segment “AF” on: AF switching mode on, and has RDS information. Segment “AF” flashing: ...
Page 37 - Press the PTY button or click the icon
37 1) Switches automatically from any audio mode to the traffic announcement.2) Switches on the traffic announcement automatically when the receiver is in waiting reception mode and theaudio signal is muted.3) TA, TP will be displayed on LCD. Note : When the traffic announcement is over, the initial...
Page 38 - Emergency broadcast
38 After selecting a program type, the radio will search relevant PTY information automatically. The radio willstop searching if the radio detects the PTY relevant information. If the relevant PTY information is not found,the radio exits the PTY function and returns to previous normal mode. Emergenc...
Page 39 - Disc operations; Discs for playback
39 Disc operations Discs for playback This unit can play disc types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW.Compatible with formats: DVD/SVCD/VCD/MP3/WMA/HDCD/CDDA/MPEG4(DivX)/Picture-CD/JPEG.The following file types are supported:Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5....
Page 41 - Loading/Unload a Disc; on the bottom of; : to make it possible to use RC, switch joyswitch to DVD mode.; Playing the previous/ next track
41 Loading/Unload a Disc Press EJECT button on the head unit or the remote control, you can flip down a front panel.Then insert the disc into the disc slot with the printed side facing up. The unit will retract the front panel andplay the disc automatically.Pressing the top left corner of the touch ...
Page 44 - : On some disc, you can select the items with the numeric button.; Multi-subtitle Language Function
44 3. To return to normal playback, press the A-B button again. Playing In Random Sequence Briefly press the RDM button on the remote control to switch the random mode on/off. If the random mode ison the tracks (files) in the disc or USB/SD/MMC memory card will be played in random sequence. Step pla...
Page 45 - : some discs only contain one audio channel.
45 The language number is different according to the disc.The number of available language varies from disc to disc. Multi-Audio LanguageFor DVD For DVD discs which have multiple language soundtracks, you can press AUDIO button to switch between theaudio languages recorded on the disc. Note: The num...
Page 46 - ZOOM Function
46 This example indicates that you are currently viewing the first of three available camera angles. Press ANGLEbutton to select a different angle. Notes: Some time may be required for the angle to change.Depending on the disc, the viewing angle can be switched in one of two ways. 1. Seamless: The a...
Page 47 - Programmed Play Function
47 Programmed Play Function Press the PROG button during playback to activate the program-editing interface as follows: For VCD/SVCD/CD: For DVD/MP3/MPEG4: 1) Use cursor buttons on the remote control to select the item that you want to program. The item you selectedwill be highlighted.2) Input the t...
Page 49 - GOTO Function; Press GOTO button, the screen will display the following message.; To search for a particular Title, Chapter, or Track
49 C-: Remaining time of the current chapter.4. Audio language or audio channel indication5. Subtitle language indication6. View angle indication7. Mute indication8. PBC indication (only for VCD with PBC)9. Repeat playback indication : One track repeat playback; : One directory repeat playback;: The...
Page 52 - USB Operations; Using the USB device:
52 USB Operations This car DVD player features a USB interface. A USB device can be connected to this port. Using the USB device: When you insert a USB device into the USB port, the DVD player will search and read theMP3/WMA/MPEG4 file in the USB device automatically (not all USB sticks supports thi...
Page 53 - SD/MMC Memory Card Operations
53 SD/MMC Memory Card Operations This car DVD player features a SD/MMC memory card slot. ASD/MMC memory card can be connected to thisslot.Using the SD/MMC card: After removing the front panel by pressing the RELEASE button, so that you can insert a SD/MMC card intothe memory card slot, then remount ...
Page 54 - AV In Operations; Press the SOURCE button or click the icon
54 AV In Operations This DVD player is equipped with an Audio / Video Auxiliary input jack, so you can connect audio/videodevice you wish to use in this car DVD player.1) To connect with a mobile audio/video system by using the auxiliary A/V input cable.2) Press SOURCE button on the remote control t...
Page 55 - TV Operations; Switch to TV mode; Press SOURCE button to switch to TV mode. Or click the icon; : Move the joyswitch on the RC to TV position.; Searching Channels; Press the GOTO button on the remote or click the icon
55 TV Operations Switch to TV mode Press SOURCE button to switch to TV mode. Or click the icon on main control interface to switch to TV mode. In TV mode, the function of the buttons served in DVD mode is locked. Note : Move the joyswitch on the RC to TV position. Searching Channels Press the GOTO b...
Page 56 - Selecting Channels
56 -Then press NEXT button on the RC, or click icon on the touch screen to start searching TV channels. - Press the PREVIOUS the RC or click icon on the touch screen to stop searching TV channels. Selecting Channels - Press NEXT/ PREVIOUS buttons on the RC or click the icons / to choose channel upwa...
Page 57 - Handling and cleaning discs; Cleaning
57 Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temper...
Page 58 - Troubleshooting guide; Symptom
58 Troubleshooting guide Symptom Cause Solution No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to thecar accessory switch the ignition key to “ACC”.Replace the fuse. Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the p...
Page 59 - Specification
59 Specification DVD/CD/MP3 RECEIVER GeneralPower supply: 12 V DC Maximum power output: 50 W x 4 channelsStorage types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC Compatible formats: DVD/SVCD/VCD/DVCD/HDCD/MP3/WMA/CDDA/DVD Audio/Super AudioCD/Picture-CD/JPEG ESP function: 40 sec. for Audio CD, 120 se...
Page 61 - USB
61 ! . , . .................................................................................................................................................... 61 ............................................................................................................................... 62 .........
Page 64 - DIN
64 : , . , , . , . 30° , . , , , . , , , , , , , , . « » « » : DIN , DIN, , . .
Page 65 - RELEASE
65 1. ( ) , DIN. 1. , , (-). 2. . 3. RELEASE . 4. , , . 5. , . ("L") ("R") . .
Page 67 - Nissan
67 1. , , (-). 2. RELEASE, . 3. , , . 4. . 5. ( ). 2. ( ) Nissan Toyota, , T (Toyota), N (Nissan) , . . (5x5 ) .
Page 77 - MODE
77 MODE . : BT, IPOD CDC . SMART/MODE , . SMART/MODE, : MEDIA => TV => AV1 => AV2. , , , . , . . , . , USB SD/MMC, , , . , USB SD/MMC, , , , . : , . EJECT, ; . EJECT, ; .
Page 78 - TFT; TV
78 : ; , EJECT. TFT , . , USB SD/MMC, TV AV1/AV2, DISP ; , , .
Page 79 - SOURCE; “Tools”
79 . SOURCE . (Media, GPS, TV, AV 1, AV 2 Radio), . . “Tools” “Tools” MENU .
Page 85 - GPS
85 . “Tools”; , . 3) TV format ( ) NAV Voice ). 1. . 2. GPS .
Page 87 - DVD
87 4. DVD “Tools” ; DVD. : DVD . DVD MENU; ENTER , . . , ; . , , . . , .
Page 90 - DIVX
90 . . DIVX . ( DivX ) ( ) . , . , . , . : ( ), . SPDIF/RAW : , .
Page 95 - FM
95 (1-6), , , . PREVIOUS/NEXT . : AS/PS , . 6 . : AS/PS . , 5 , . , AS/PS . FM . , , . MO/ST .
Page 96 - DX; RDS; RDS
96 (LOCAL/DX) , , , LOCAL ( ). DX ). LO/DX . RDS RDS ( ) . , RDS , . : PI, PS, TP, PTY, TA AF. PI: . PS: – . TP: – , . TA: – . AF: – , . : RDS FM. RDS ; , , RDS, .
Page 107 - PROG
107 2. : , . . ZOOM, . : 2 => 3 => 4 => 1/2 => 1/3 => M 1 / 4 => . PROG : VCD/SVCD/CD:
Page 109 - VCD
109 1. 2. 1/3: ; 1 /1: ; 9/18: . : ; : ; T: ; T-: ; C: ; C-: . 4. ; 5. ; 6. ; 7. ; 8. PBC ( VCD , PBC); 9. ; : ; : ; : ; : .
Page 115 - AV
115 AV , . 1) AV - . 2) SOURCE , AV1 AV2. . GPS ( ) SOURCE , GPS. GPS GPS . : GPS- , . . SD/MMC GPS- ; GP- GPS .
Page 116 - GOTO
