Hyundai Multimedia DVD/CD/MP3 Receiver H-CMD4015- Manuals
Hyundai Multimedia DVD/CD/MP3 Receiver H-CMD4015– User Manual in PDF format online.
Manuals:
User Manual Hyundai Multimedia DVD/CD/MP3 Receiver H-CMD4015
Summary
2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................
3 Important safeguards Using the device at temperature below -10º may cause the breakage of the device.Before using, please, heat up the passenger compartment to the recommended temperature!Read carefully through this manual to familiarize yourself with this high-quality car stereo system.Disconnect...
4 Accessories HEXAGON NUT 1 PCS MOUNTING BOX 1 PCS LEFT KEY 1 PCS RIGHT KEY 1 PCS METAL BAR 1 PCS CONNECTOR ISO 1 PCS PLAIN WASHER ( =5mm) 1 PCS CARRY CASE 1 PCS GPS EXTERNAL ANTENNA 1 PCS SPRING WASHER ( =5mm) 1 PCS TV ANT WIRE 1 PCS AV IN WIRE 1 PCS SCREW ( 5X5mm) 4 PCS SCREW ( 5X25mm) 1 PCS CUSTO...
5 Installation/connection Notes: Choose the mounting location where the unit will not interfere with the normal driving function of thedriver.Before finally installing the unit, connect the wiring and make sure that the unit works properly.Consult with your nearest dealer if installation requires th...
7 9. To further secure the unit, use the supplied metal strapto secure the back of the unit in place. Use the suppliedhardware (Hex Nut (M5mm) and Spring Washer) toattach one end of the strap to the mounting bolt on theback of the unit. If necessary, bend the metal strap to fityour vehicle's mountin...
8 2. DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow this mounting instruction. Use the screw holes marked T (Toyota), N(Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied withyour vehicle. Fasten the unit to the factory...
9 2. Pull off the front panel from the main unit.Store the front panel in the protective case provided for safe keeping. TO ATTACH THE FRONT PANEL First fasten the right side of the front panel onto the bracket of main unit. Then slightly pushthe left side of the front panel to attach the main unit....
10 Electrical Connection Note: The parking wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car.
11 Connecting the reversing line to taillight on the car After connecting, when you start up the reverse gear, the unit will receive the picture from car rear viewcamera.
12 Unit controls Front panel 1. POWER/MUTE button2. MENU button3. RELEASE button4. AF/REG button5. EJECT button6. TA button7. BAND button8. DISPLAY button9. AS/PS button10. PTY button11. USB jack12. PLAY/PAUSE button13. IR sensor14. Touch screen15. AV in jack16. VOL+/VOL-, PREVIOUS/NEXT buttons17. S...
13 Inner panel 18. Card slot for GPS Map card19. Disc slot20. LED indicator21. RESET button22. SD/MMC Memory card slot
14 Remote control 1. POWER/LIGHT button 2. MODE/SMART button 3. SETUP button 4. SUB-T button 5. ANGLE button 6. PREVIOUS/NEXT, FAST REWIND/ FAST FORWARD/Cursor buttons 7. ENTER button 8. DISPLAY button 9. ZOOM button 10. BAND button11. Digit buttons12. 9/PTY button13. 7/TA button14. 8/AF/REG button1...
15 25. AUDIO button26. PLAY/PAUSE button27. STEP button28. STOP button29. GOTO/AS/PS button30. PROGRAM/LO/DX button31. RDM/MO/ST button32. A-B button Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 lithium battery, type CR2025 (3V) bat...
16 General operations Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the frontpanel at first, and then press RESET button on the inner panel of the unit with a pointed object, (such as aballpoint pen) to set the unit to initia...
18 Dual zone Pressing and holding SMART/MODE button on the RC, you can turn on or off the dual zone playing mode.After turning on dual zone playing mode, press SMART/MODE button to select the playback mode for rearzone: MEDIA => TV => AV1 => AV2. Last Position Memory During the media playba...
19 Using the touch screen control The Touch Screen Control allows fingertip control of virtually all functions. Alternatively, you could alsooperate with ease with the user-friendly integrated big function buttons that are prominently visible. To access the main control interface In every playback m...
26 Aim at the “+” and click it, the symbol will moves around the touch screen, click it five times, system willfinish calibration automatically and exit calibration mode. If the calibration setting has been finished, the interface will pop up or the following window will appear. Touch the screen onc...
28 System Setup 1) TV SYSTEMTV SYSTEM is used to select the TV output mode. This car DVDplayer can play discs recorded in either PAL or NTSC formats. Select NTSC format when need NTSC signal on the extramonitor.Select PAL format when you need PAL signal on the extramonitor.You can also choose AUTO S...
31 Digital Setup When you open the digital setup page, you will see the DIGITALSETUP screen:1). OP MODE: Change among LINE OUT/RF REMOD. LINE OUT: LINE OUT mode, with digital dialognormalization.RF REMOD: RF REMODULATION mode, with heavycompression and digital dialog normalization. 2). DYNAMIC RANGE...
32 Radio Operations To switch to radio mode Briefly press the SOURCE button on the unit or press the SOURCE/SRC on the remote control to select the radio mode. Or click the icon on the touch screen to select the radio mode. The radio control interface will pop up. To select a radio band In radio mod...
36 Program name is displayed on receiving a RDS station. “AF” starts blinking if the broadcasting signals gettingworse.There are 3 state the segment AF on the TFT display: Segment “AF” off: AF switching mode off. Segment “AF” on: AF switching mode on, and has RDS information. Segment “AF” flashing: ...
37 1) Switches automatically from any audio mode to the traffic announcement.2) Switches on the traffic announcement automatically when the receiver is in waiting reception mode and theaudio signal is muted.3) TA, TP will be displayed on LCD. Note : When the traffic announcement is over, the initial...
38 After selecting a program type, the radio will search relevant PTY information automatically. The radio willstop searching if the radio detects the PTY relevant information. If the relevant PTY information is not found,the radio exits the PTY function and returns to previous normal mode. Emergenc...
39 Disc operations Discs for playback This unit can play disc types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW.Compatible with formats: DVD/SVCD/VCD/MP3/WMA/HDCD/CDDA/MPEG4(DivX)/Picture-CD/JPEG.The following file types are supported:Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5....
41 Loading/Unload a Disc Press EJECT button on the head unit or the remote control, you can flip down a front panel.Then insert the disc into the disc slot with the printed side facing up. The unit will retract the front panel andplay the disc automatically.Pressing the top left corner of the touch ...
44 3. To return to normal playback, press the A-B button again. Playing In Random Sequence Briefly press the RDM button on the remote control to switch the random mode on/off. If the random mode ison the tracks (files) in the disc or USB/SD/MMC memory card will be played in random sequence. Step pla...
45 The language number is different according to the disc.The number of available language varies from disc to disc. Multi-Audio LanguageFor DVD For DVD discs which have multiple language soundtracks, you can press AUDIO button to switch between theaudio languages recorded on the disc. Note: The num...
46 This example indicates that you are currently viewing the first of three available camera angles. Press ANGLEbutton to select a different angle. Notes: Some time may be required for the angle to change.Depending on the disc, the viewing angle can be switched in one of two ways. 1. Seamless: The a...
47 Programmed Play Function Press the PROG button during playback to activate the program-editing interface as follows: For VCD/SVCD/CD: For DVD/MP3/MPEG4: 1) Use cursor buttons on the remote control to select the item that you want to program. The item you selectedwill be highlighted.2) Input the t...
49 C-: Remaining time of the current chapter.4. Audio language or audio channel indication5. Subtitle language indication6. View angle indication7. Mute indication8. PBC indication (only for VCD with PBC)9. Repeat playback indication : One track repeat playback; : One directory repeat playback;: The...
52 USB Operations This car DVD player features a USB interface. A USB device can be connected to this port. Using the USB device: When you insert a USB device into the USB port, the DVD player will search and read theMP3/WMA/MPEG4 file in the USB device automatically (not all USB sticks supports thi...
53 SD/MMC Memory Card Operations This car DVD player features a SD/MMC memory card slot. ASD/MMC memory card can be connected to thisslot.Using the SD/MMC card: After removing the front panel by pressing the RELEASE button, so that you can insert a SD/MMC card intothe memory card slot, then remount ...
54 AV In Operations This DVD player is equipped with an Audio / Video Auxiliary input jack, so you can connect audio/videodevice you wish to use in this car DVD player.1) To connect with a mobile audio/video system by using the auxiliary A/V input cable.2) Press SOURCE button on the remote control t...
55 TV Operations Switch to TV mode Press SOURCE button to switch to TV mode. Or click the icon on main control interface to switch to TV mode. In TV mode, the function of the buttons served in DVD mode is locked. Note : Move the joyswitch on the RC to TV position. Searching Channels Press the GOTO b...
56 -Then press NEXT button on the RC, or click icon on the touch screen to start searching TV channels. - Press the PREVIOUS the RC or click icon on the touch screen to stop searching TV channels. Selecting Channels - Press NEXT/ PREVIOUS buttons on the RC or click the icons / to choose channel upwa...
57 Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temper...
58 Troubleshooting guide Symptom Cause Solution No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to thecar accessory switch the ignition key to “ACC”.Replace the fuse. Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the p...
59 Specification DVD/CD/MP3 RECEIVER GeneralPower supply: 12 V DC Maximum power output: 50 W x 4 channelsStorage types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC Compatible formats: DVD/SVCD/VCD/DVCD/HDCD/MP3/WMA/CDDA/DVD Audio/Super AudioCD/Picture-CD/JPEG ESP function: 40 sec. for Audio CD, 120 se...
61 ! . , . .................................................................................................................................................... 61 ............................................................................................................................... 62 .........
64 : , . , , . , . 30° , . , , , . , , , , , , , , . « » « » : DIN , DIN, , . .
65 1. ( ) , DIN. 1. , , (-). 2. . 3. RELEASE . 4. , , . 5. , . ("L") ("R") . .
67 1. , , (-). 2. RELEASE, . 3. , , . 4. . 5. ( ). 2. ( ) Nissan Toyota, , T (Toyota), N (Nissan) , . . (5x5 ) .
77 MODE . : BT, IPOD CDC . SMART/MODE , . SMART/MODE, : MEDIA => TV => AV1 => AV2. , , , . , . . , . , USB SD/MMC, , , . , USB SD/MMC, , , , . : , . EJECT, ; . EJECT, ; .
78 : ; , EJECT. TFT , . , USB SD/MMC, TV AV1/AV2, DISP ; , , .
79 . SOURCE . (Media, GPS, TV, AV 1, AV 2 Radio), . . “Tools” “Tools” MENU .
85 . “Tools”; , . 3) TV format ( ) NAV Voice ). 1. . 2. GPS .
87 4. DVD “Tools” ; DVD. : DVD . DVD MENU; ENTER , . . , ; . , , . . , .
90 . . DIVX . ( DivX ) ( ) . , . , . , . : ( ), . SPDIF/RAW : , .
95 (1-6), , , . PREVIOUS/NEXT . : AS/PS , . 6 . : AS/PS . , 5 , . , AS/PS . FM . , , . MO/ST .
96 (LOCAL/DX) , , , LOCAL ( ). DX ). LO/DX . RDS RDS ( ) . , RDS , . : PI, PS, TP, PTY, TA AF. PI: . PS: – . TP: – , . TA: – . AF: – , . : RDS FM. RDS ; , , RDS, .
107 2. : , . . ZOOM, . : 2 => 3 => 4 => 1/2 => 1/3 => M 1 / 4 => . PROG : VCD/SVCD/CD:
109 1. 2. 1/3: ; 1 /1: ; 9/18: . : ; : ; T: ; T-: ; C: ; C-: . 4. ; 5. ; 6. ; 7. ; 8. PBC ( VCD , PBC); 9. ; : ; : ; : ; : .
115 AV , . 1) AV - . 2) SOURCE , AV1 AV2. . GPS ( ) SOURCE , GPS. GPS GPS . : GPS- , . . SD/MMC GPS- ; GP- GPS .
Hyundai Manuals
-
Hyundai 2006 Elantra
User Manual
-
Hyundai 2008 Santa Fe
User Manual
-
Hyundai 2009 Sonata
User Manual
-
Hyundai 2010 Elantra
User Manual
-
Hyundai 2008 Elantra
User Manual
-
Hyundai 2011 Accent
User Manual
-
Hyundai 2011 Sonata
User Manual
-
Hyundai 2010 Santa Fe
User Manual
-
Hyundai 2012 Accent
User Manual
-
Hyundai 2011 Tucson
User Manual
-
Hyundai 2012 Elantra
User Manual
-
Hyundai 2012 Santa Fe
User Manual
-
Hyundai 2012 Sonata
User Manual
-
Hyundai 21 Series
User Manual
-
Hyundai 21 Series
Manual
-
Hyundai 2D/3D
User Manual
-
Hyundai 95-7333
User Manual
-
Hyundai 95-7333
Manual
-
Hyundai 99-7300
User Manual
-
Hyundai 99-7300
Manual