Page 2 - CONFORMITY CERTIFICATES
©2022 All rights reserved. Orangeburg, SC Printed in U.S.A. When this product is worn out and no longer used, return it to the reseller or other party for recycling. To implement improvements, specifications and designs can be altered without prior notification. Use only original parts for repairs. ...
Page 3 - C O N T E N T S
C O N T E N T S INTRODUCTION ...................................................... 4 Driving and Transport on Public Roads ............... 4 Towing .................................................................. 4 Operating ............................................................. 4 SYMBOLS ...
Page 4 - I N T R O D U C T I O N; Congratulations
4 I N T R O D U C T I O N Congratulations Thank you for purchasing a Husqvarna ride- on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both cont...
Page 5 - Good Service; Manufacturing Number; found on the printed plate affixed to the engine
5 I N T R O D U C T I O N Good Service Husqvarna’s products are sold around the world at independent dealers, retailers and online stores. No matter where you buy a Husqvarna product or solution, you can count on our team to provide you with dedicated service and support throughout the life of the p...
Page 6 - R N; S Y M B O L S A N D D E C A L S; Xxxx xxxxxx xxxxx xxxx
R N 6 S Y M B O L S A N D D E C A L S These symbols are found on the machine and in the operator manual. Study them carefully so that you know what they mean. IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. Used in ...
Page 7 - S A F E T Y; AND FEET AND THROWING OBJECTS.; General Operation; services this machine must first read and; IMPORTANT INFORMATION; Protecting Children; Do not; machine off if a child; Safety Instructions
7 S A F E T Y WARNING! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manual b...
Page 8 - Personal Safety Equipment
8 S A F E T Y • Always turn off blades, move the steering control lever out to the park brake position, stop engine and remove keys before dismounting. • Do not carry passengers. The machine is only intended for use by one person. • Disengage blades when not mowing. Shut off engine and wait for all ...
Page 9 - General Maintenance; be started when the driver’s floor plate or; Safe Handling of Gasoline
9 S A F E T Y • If fuel is spilled on clothing, change clothing immediately. • Do not start the engine near spilled fuel.• Do not use gasoline as a cleaning agent.• If leaks arise in fuel system, the engine must not be started until problem has been resolved. • Check the fuel level before each use a...
Page 10 - is not sufficient to lock the machine in place; Transport; or death if the machine falls off the ramps.
10 S A F E T Y • Do not operate this machine on public roadways. • Check and abide by local traffic regulations before transporting the machine on public roads. • Do not tow this machine, it may cause damage to the drive system. • Do not tow trailers, etc. with this mower. They may jackknife or over...
Page 11 - Towing; Make wide turns to avoid jack-knifing. Travel; Spark Arrestor
11 S A F E T Y Towing If machine is equipped with a tow hitch, use much more caution when towing. Do not let children or others in or on towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and leave more distance to stop. Do not tow on sloped ground. The weight of the towed equipme...
Page 12 - C O N T R O L S; Fuel shut off valve
1 2 10 11 12 3 4 6 7 8 9 5 12 C O N T R O L S 1. Steering / park brake controls2. Tracking bolt, left3. Deck lift4. Fuse 5. Bypass Linkages6. Fuel shut off valve 7. Fuel tank8. Choke control 9. Throttle control10. Service meter11. Ignition switch12. Blade switch This operator manual describes the Hu...
Page 13 - Park; Steering Control Levers; WARNING; ! The machine can turn very; Park Brake; Ignition Switch; when standing still or do not fit in the slots for
13 C O N T R O L S Park Brake Forward Neutral Reverse Steering Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. There is a neutral position, which is locked if ...
Page 14 - Blade Switch; the meter, turn the key off and on five times at; Throttle Control; the seat forward. The fuse is a flat pin type used; Fuse; The fuel shut off valve is located at the right rear
14 C O N T R O L S Blade Switch To engage the mower deck, pull the knob out; mower blades are disengaged when the knob is pressed down. Service Meter The service meter displays the total operating time with the blade activated.At 50 hour intervals of operation, an oil can icon shows and stays on for...
Page 15 - Cutting Height Lever; To obtain an; Always raise the; Bypass Linkages; close to the muffler. To prevent burns, the; To Adjust The Seat; Fuel Tank
15 C O N T R O L S Cutting Height Lever IMPORTANT INFORMATION To obtain an even cutting height, it is important that the air pressure in all tires is 15 psi / 103 kPa / 1 bar. IMPORTANT INFORMATION Always raise the deck to the highest position for transport. To set the deck cutting height, pull the ...
Page 16 - Do not overfill. Clean off spilled oil or fuel. Do; Storage; Tracking; Observe caution and fill the tank outdoors
16 C O N T R O L S WARNING ! Fill to bottom of filler neck. Do not overfill. Clean off spilled oil or fuel. Do not store, spill or use gasoline near an open flame. WARNING! The engine and the exhaust system, become very hot during operation. There is a risk for burns if touched. Let engine and exhau...
Page 17 - O P E R AT I O N; Training; To move forward and backward; Moving Machine By Hand; To turn to the right; Before Starting; Maintenance Schedule
17 O P E R AT I O N Read the Safety section and following pages, if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers.Review this section fully prior to trying to move the mower under its own power...
Page 18 - Starting the Engine; Move the steering / park brake controls firmly; Stopping the Engine; ! Make sure that no one is; USE; Running; NOTE: The mower is equipped with an
18 O P E R AT I O N Starting the Engine 1. Sit on the seat.2. Raise the mower deck to the highest position. 3. Disengage the mower blades by pressing the blade switch downwards. 4. Move the steering / park brake controls firmly out to the locked position. 5. Move the throttle lever to the middle thr...
Page 19 - Operating on Hills; Driving on Slopes; Mowing Tips
19 O P E R AT I O N IMPORTANT INFORMATION When stopping and leaving the machine, both steering / park brake controls must be moved out to the locked position at the same time. IMPORTANT INFORMATION Leaving the ignition switch in a position than OFF will cause the battery to be discharged. WARNING! D...
Page 21 - M A I N T E N A N C E; MAINTENANCE INTERVAL; ! Before performing service or
21 M A I N T E N A N C E Maintenance Schedule Following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service MAINTENANCE DAILY AT LEAST ONCE EACH YEAR MAINTENANCE INTERVAL IN ...
Page 22 - Positive terminal must be connected first to
22 M A I N T E N A N C E MAINTENANCE DAILY AT LEAST ONCE EACH YEAR MAINTENANCE INTERVAL IN HOURS BEFORE AFTER 25 50 100 300 CHECK Throttle cable for adjustment ■ Mower deck for adjustment ● ● Condition of belts, belt pulleys ● ● Caster wheels (at 200 hour intervals) ● ● Engine valve clearance 3) ♦ ♦...
Page 23 - Do not try to; Cleaning battery and terminals; J bolts just enough that the battery mount; Battery; Jumper Cable Use; Remove BLACK cable first from chassis and; Replacing battery
23 M A I N T E N A N C E IMPORTANT INFORMATION Do not try to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.Always use two wrenches for the terminal screws. The mower is equipped with a maintenance free battery. Servicing is not necessary. Periodic charging o...
Page 24 - Safety System; Visually check that no damage is found on the; steering / park brake; Tire Pressures; a tire liner or foam fill material to the tires.
24 M A I N T E N A N C E Safety System The machine is equipped with a safety system that prevents starting or driving under the following conditions.The engine can only be started when: • the mower deck is disengaged.• the steering / park brake controls are in the outer, locked neutral position, mak...
Page 25 - they are slightly off of the ground when the deck; Caster Wheels; Foam filled tires or solid tires will void the; Removal and installation; NOTE: For ease in installing the deck belt, refer to; matches the deck
25 M A I N T E N A N C E Anti-scalp Rollers Anti-scalp rollers are correctly adjusted when they are slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti-scalp rollers keep the deck in the proper position to help prevent scalping in most terrain co...
Page 26 - Adjusting the Mower Deck; Leveling deck; surface. Make sure the tires are inflated to; Cutting Blades; Protect your hands with gloves; Blade replacement; Seat the blade's opening firmly onto the cutter
26 M A I N T E N A N C E Adjusting the Mower Deck Leveling deck Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See Technical Data / Transmission. If tires are under or over inflated, the deck cannot be correctly adjusted. Raise the de...
Page 27 - Special blade; Cleaning
27 M A I N T E N A N C E IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than specified. CAUTION! Use protective glasses when cleaning and washing. Cleaning Regular cleaning, especially under the mower deck, will in...
Page 28 - L U B R I C AT I O N; General; When lubricating with an oil can, it must be filled; Transmission; pressure can have sufficient force to penetrate
12/12 Each year Lubricate with grease gun 1/52 Each Week Filter change 1/365 Each day Oil change Level check 28 L U B R I C AT I O N General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be filled with engine oil.When lubrica...
Page 29 - Engine Oil; NOTE: Change the engine oil when the engine; Wheel and Deck Zerks; Front Wheel Mount; ! The engine drain plug is
29 L U B R I C AT I O N Engine Oil NOTE: Change the engine oil when the engine is warm. Refer to the engine owner’s manual for the correct replacement oil and filter change recommendations. 1. Park on a level surface. Apply park brake.2. Clean the dirt and debris from the area around the oil fill ca...
Page 30 - T R O U B L E S H O O T I N G; Ignition system faulty; Battery not charging; Transmission drive belt is slack or off; Mower deck not engaging
30 T R O U B L E S H O O T I N G Problem / Cause Engine will not start Blade switch is engagedSteering controls are not locked in the neutral positionPark brake is not activatedDead batteryContamination in the carburetor or fuel line Fuel supply shutoff valve is closedClogged fuel filter or fuel lin...
Page 31 - S TO R A G E; Winter Storage; specified by the manufacturer of the stabilizer.; Service; with open flames, sparks, or a pilot light
31 S TO R A G E Winter Storage The machine should be readied for storage at the end of the mowing season or if it will not be in use for more than 30 days. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can clog the carburetor and disrupt engine funct...
Page 32 - S C H E M AT I C
Page 33 - T E C H N I C A L D ATA; Pressure with oil filter
33 T E C H N I C A L D ATA ENGINE Manufacturer Kawasaki Type FR651V Power 21.5 hp 1) Spark Plug NGK BPR4ES Gap: .030" (0,76 mm) Lubrication Pressure with oil filter Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%) Fuel tank capacity 3-1/2 gallons 13.25 litres Cooling Air cooled Air fi...
Page 34 - HEX HEAD CAP SCREWS; when specific torque values are not given.; Shank Size; Metric Standard Hardware; fine or coarse thread); Torque Specifications
34 T E C H N I C A L D ATA HEX HEAD CAP SCREWS The torque values shown should be used as a general guideline when specific torque values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut Size ft./lbs Nm ft./lbs Nm ft./lbs Nm Shank Size (Diameter in...
Page 35 - S E R V I C E J O U R N A L; DELIVERY SERVICE; Fill with fuel and open the fuel shut off valve
35 S E R V I C E J O U R N A L DELIVERY SERVICE Action Date, mtr reading, stamp, sign Charge and connect the battery r Adjust the tire pressure of all wheels to 15 PSI (1 bar) r Connect the contact box to the cable for the seat’s safety switch r Check that the right quantity of oil is in the engine ...
Page 36 - AFTER 10 HOURS; Check the fuel pump’s air filter; SERVICE; Clean / replace the air cleaner’s paper filter cartridge
36 S E R V I C E J O U R N A L AFTER 10 HOURS Action Date, mtr reading, stamp, sign Change the engine oil r DAILY SERVICE Action Date, mtr reading, stamp, sign Clean debris from mower r Check engine oil level r Check the tire pressures r Check underside of deck r Check safety system r Check fuel sys...
Page 38 - ©2022 Todos los derechos reservados.; CERTIFICADOS DE CONFORMIDAD; Para implementar mejoras, las specificaciones
©2022 Todos los derechos reservados. Orangeburg (Carolina del Sur). Impreso en EE. UU. CERTIFICADOS DE CONFORMIDAD Requisitos para EE.UU. En el motor y/o en el compartimiento del motor hay etiquetas que indican que la máquina cumple con los requisitos. Esto también es aplicable a requisitos especial...
Page 39 - I N T R O D U C C I Ó N; eficiencia superior al cortar con rapidez áreas
39 I N T R O D U C C I Ó N Felicitaciones Gracias por adquirir un cortacésped Husqvarna. Esta máquina se ha fabricado para lograr una eficiencia superior al cortar con rapidez áreas grandes. Un panel de control fácilmente accesible para el operador y una transmisión hidrostática regulada por control...
Page 40 - Número de fabricación; Tenga a mano la designación del tipo y el número; Buen servicio
40 I N T R O D U C T I O N Número de fabricación El número de fabricación de la máquina se puede encontrar en la placa impresa colocada en el compartimiento del motor.En la placa se indican los siguientes detalles, desde la parte superior:• La designación del tipo de máquina (I. D.).• El número de t...
Page 41 - S Í M B O L O S Y R Ó T U L O S; INFORMACIÓN IMPORTANTE; Xxxx xxxxxx; ADVERTENCIA; Xxxx xxxxxx xxxxx
R N 41 S Í M B O L O S Y R Ó T U L O S INFORMACIÓN IMPORTANTE Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. ADVERTENCIA ! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. Reversa Neutro Rápido Lento Estrangulador Combustible Freno de estacionamiento Advertencia Altura de corte baja Altura de ...
Page 42 - S E G U R I D A D; Uso general; cuando atraviese superficies de grava.; CAUSAR LESIONES GRAVES O LA; Seguridad infantil
42 S E G U R I D A D Uso general • Lea, entienda y siga todas las instrucciones sobre la máquina en el manual antes de comenzar. • Se recomienda que alguien esté al tanto de que está usando la máquina y pueda prestar ayuda en caso de lesión o accidente. • Cualquier persona que opere, realice manteni...
Page 43 - con buena luz artificial.; Equipo de seguridad personal
43 S E G U R I D A D • No maneje la máquina si no tiene el recogedor de césped completo, la protección de descarga u otros dispositivos de seguridad en su lugar y en funcionamiento. • Desacelere antes de dar la vuelta.• No deje la máquina en funcionamiento sin vigilar. Siempre detenga las cuchillas,...
Page 44 - Manipulación segura de la gasolina; haya una flama; Mantenimiento general; inflamable y los vapores son explosivos.
44 S E G U R I D A D ADVERTENCIA: No conduzca en lomas con pendientes superiores a 10 grados. Y no conduzca a través de pendientes. • No corte el césped húmedo. Los neumáticos podrían perder tracción. • Evite arrancar, parar o girar en una pendiente. Si los neumáticos pierden tracción, desacople las...
Page 45 - No interfiera con la función propia de los
45 S E G U R I D A D ADVERTENCIA: El motor no debe arrancarse si se he retirado la placa del piso del conductor o cualquier placa protectora de la correa de transmisión del equipo de corte. • Asegúrese de que el equipo esté en buen estado y que todas las tuercas y los pernos, sobre todo los que aseg...
Page 46 - estacionamiento no es suficiente para bloquear; Transporte; Consulte y respete las normas de tráfico locales; Remolque; para detenerse. No remolque en una superficie; Parachispas
46 S E G U R I D A D INFORMACIÓN IMPORTANTE El freno de estacionamiento no es suficiente para bloquear la máquina en su lugar durante el transporte. Asegúrese de que la máquina esté bien sujetada al vehículo de transporte. Siempre ingrese la máquina marcha atrás al vehículo de transporte para evitar...
Page 47 - C O N T R O L E S; Varillajes de derivación
47 C O N T R O L E S Este manual del operador corresponde al cortacésped Zero Turn de Husqvarna. El cortacésped está equipado con un motor de válvula superior de cuatro tiempos. La transmisión del motor se hace mediante bombas hidráulicas accionadas por correa. Utilizando los controles de la direcci...
Page 48 - Palancas de control de la dirección; Freno de estacionamiento
48 C O N T R O L E S HACIA ADELANTE NEUTRO REVERSA FRENO DE ESTACION- AMIENTO Palancas de control de la dirección La velocidad y la dirección de la máquina son de tipo variable continua con los dos controles de la dirección. Los controles de la dirección se pueden mover hacia adelante o hacia atrás ...
Page 49 - Interruptor de encendido; NOTA: El indicador de servicio funciona (horas; Estrangulador
49 C O N T R O L E S Interruptor de encendido El interruptor de encendido se encuentra en el panel de control y se utiliza para arrancar y detener el motor. Control del acelerador El acelerador regula el régimen del motor y la velocidad de rotación de las cuchillas, asumiendo que el interruptor de c...
Page 50 - Fusible; Para obtener; Eleve siempre; alinee el orificio en la base del asiento para
50 C O N T R O L E S Fusible El fusible principal de 20 amperios está ubicado en el lado izquierdo de la máquina. Acceda a él inclinando el asiento hacia adelante. El fusible es del tipo plano que se usa en los automóviles. Válvula de corte de combustible La válvula de corte de combustible está ubic...
Page 51 - Depósito de combustible; Almacenamiento; Desplazamiento; inflamable. Respete las precauciones y llene el
51 C O N T R O L E S Depósito de combustible INFORMACIÓN IMPORTANTE La experiencia indica que los combustibles mezclados con alcohol (llamados gasohol, etanol o metanol) pueden atraer la humedad, lo que lleva a la separación y la formación de ácidos durante el almacenamiento. El gas ácido puede daña...
Page 52 - O P E R A C I Ó N; Capacitación; el movimiento del cortacésped en una superficie; Dirección; Para mover la máquina hacia adelante y hacia; Antes de arrancar; Compruebe que haya suficiente combustible
52 O P E R A C I Ó N Lea la sección Seguridad y las páginas siguientes si no está familiarizado con la máquina. Capacitación Debido a su exclusiva capacidad de dirección, los cortacésped de giro cero son mucho más maniobrables que los cortacésped típicos.Esta sección se debe analizar en su totalidad...
Page 53 - Arranque del motor; estacionamiento firmemente hacia afuera,; Operación; NOTA: El cortacésped está equipado con
53 O P E R A C I Ó N ADVERTENCIA ! Los gases de escape del motor contienen monóxido de carbono, que es un gas venenoso inodoro e incoloro. No utilice la máquina en espacios cerrados. Arranque del motor 1. Siéntese en el asiento.2. Levante el equipo de corte hasta la posición más alta. 3. Desacople l...
Page 54 - Detención del motor; Observe e identifique rocas y otros objetos fijos; Trabajo en pendientes; Conducción
54 O P E R A C I Ó N mueva despacio ambas palancas de control ligeramente hacia adelante para avanzar en una línea recta. Detención del motor 1. Mueva el acelerador a la posición mínima (con el símbolo en forma de tortuga). 2. Mueva los controles de la dirección/freno de estacionamiento fuera de la ...
Page 55 - del corte es deficiente porque las ruedas se; Mover la máquina manualmente; LEVANTE LA MÁQUINA! La máquina no está
55 O P E R A C I Ó N • Use una manguera para limpiar el equipo de corte por debajo después de cada uso. Durante la operación de limpieza, el equipo de corte debe levantarse a la posición de transporte. Asegúrese de que el cortacésped se haya enfriado y el motor esté apagado. • • Evite cortar césped ...
Page 56 - M A N T E N I M I E N TO; Programa de mantenimiento; Mantenimiento
56 M A N T E N I M I E N TO Programa de mantenimiento La siguiente es una lista de procedimientos de mantenimiento que se deben realizar en la máquina. Para los puntos que no se describen en este manual, visite un taller de servicio autorizado. Se recomienda enviar la máquina a revisión una vez al a...
Page 58 - Limpieza de la batería y las terminales; Afloje las dos tuercas puestas en los pernos; Cambio de la batería; Batería; Uso del cable puente; Quite el cable ROJO de las dos baterías en
58 M A N T E N I M I E N TO El cortacésped está equipado con una batería que no requiere mantenimiento. Sin embargo, cargar periódicamente la batería con un cargador de batería automotriz prolongará su vida útil.• Mantenga la batería y las terminales limpias.• Mantenga los pernos de la batería apret...
Page 59 - Sistema de seguridad; NOTA: Si los controles de la dirección no se mantienen; detención y compruebe que haya suficiente
59 M A N T E N I M I E N TO Sistema de seguridad La máquina está equipada con un sistema de seguridad que impide el arranque o la conducción en las condiciones siguientes.El motor solo puede arrancarse cuando:• el equipo de corte está desacoplado.• los controles de la dirección/freno de estacionamie...
Page 60 - Presión de los neumáticos; Utilice solo neumáticos especificados por el; Ruedecillas; Desmontaje y montaje; Correas en V; Extracción de la correa del equipo; Estacione la máquina en una superficie; Ruedas de apoyo; superficie plana y nivelada.
60 M A N T E N I M I E N TO Presión de los neumáticos Todos los neumáticos deben tener una presión de 15 psi / 103 kPa / 1 bar. INFORMACIÓN IMPORTANTE NO agregue ningún tipo de camisa de neumático ni material de relleno de espuma a los neumáticos. Las cargas excesivas creadas por neumáticos rellenos...
Page 61 - Ajuste del equipo de corte; Nivelación del equipo; Datos técnicos; Instalación de la correa del equipo; NOTA: Para instalar fácilmente la correa de la
61 M A N T E N I M I E N TO Ajuste del equipo de corte Nivelación del equipo Ajuste el equipo mientras el cortacésped esté en una superficie nivelada. Asegúrese de que los neumáticos estén inflados a la presión correcta. Consulte Datos técnicos / Transmisión. Si los neumáticos tienen aire de menos o...
Page 62 - NOTA: Para fines ilustrativos, se quitó el; Discos de corte; importante que las cuchillas estén bien afiladas y; AVISO; El afilado de las cuchillas debe realizarlo un; Reemplazo de las cuchillas; Instale cuchillas nuevas o reafiladas con
62 M A N T E N I M I E N TO delantera. Girar en el sentido de las agujas del reloj hará que se levante la parte delantera del cortacésped; y contra el sentido de las agujas del reloj, que se baje la parte delantera. Ajuste las tuercas hasta que la parte trasera del equipo de corte esté en un nivel 1...
Page 63 - Limpieza; superficie superior del equipo de corte. No utilice; Tornillería; Utilice gafas de protección
63 M A N T E N I M I E N TO Limpieza La limpieza regular, especialmente por debajo del equipo de corte, aumenta la vida útil de la máquina. Limpiar la máquina directamente después de cada uso (una vez que se haya enfriado), antes de que la suciedad se adhiera.No rocíe con agua la parte superior del ...
Page 64 - L U B R I C A C I Ó N; Información general; correas o las superficies de avance de las poleas; las correas o las superficies de avance de la; Transmisión; Cambiar filtro
64 L U B R I C A C I Ó N Información general Retire la llave de contacto para evitar movimientos involuntarios durante las tareas de lubricación.Si realiza la lubricación con una lata de aceite, debe contener aceite de motor.Si lubrica con grasa, a menos que se indique lo contrario, use grasa de bis...
Page 65 - Engrasadores de rueda y equipo; Montaje de la rueda delantera; Aceite del motor; NOTA: Cambie el aceite del motor cuando el
65 L U B R I C A C I Ó N Engrasadores de rueda y equipo Utilice únicamente grasa para cojinetes de buena calidad.La grasa de marcas reconocidas (empresas petroquímicas, etc.) generalmente mantiene una buena calidad. Montaje de la rueda delantera Lubrique las carreras 3-4 con una pistola de engrase e...
Page 66 - S O L U C I Ó N D E P R O B L E M A S; Sistema de; El motor funciona con dificultad; Obstrucción en el filtro o suministro de; La máquina vibra; Ventilación deficiente alrededor del motor; La máquina se mueve lentamente, de forma; Varillaje de desviación de la bomba hidráulica; El equipo de corte no está acoplado; Las cuchillas están desafiladas
66 S O L U C I Ó N D E P R O B L E M A S Problema / Causa El motor no arranca El interruptor de la cuchilla está activadoLos controles de dirección no están bloqueados en la posición externaLa batería está agotadaHay contaminación en el carburador o la tubería de combustibleLa válvula de corte del s...
Page 67 - A L M A C E N A M I E N TO; Almacenamiento durante el invierno; almacenamiento al final de la temporada de corte; Servicio; inflamable y puede provocar daños personales
67 A L M A C E N A M I E N TO Almacenamiento durante el invierno La máquina debe prepararse para el almacenamiento al final de la temporada de corte o si se no se va a utilizar durante más de 30 días. El combustible que se deja en el depósito durante largos períodos de tiempo (30 días o más) puede d...
Page 68 - E S Q U E M A
Page 69 - D ATO S T É C N I C O S; A presión con filtro de aceite
69 D ATO S T É C N I C O S MOTOR Fabricante Kawasaki Tipo FR651V Electricidad 21.5 hp 1) Bujía NGK BPR4ES Abertura: .030"(0,76 mm) Lubricación A presión con filtro de aceite Combustible Sin plomo mín. 87 octanos (alcohol etílico máx. 10 %, MTBE máx. 15 %) Capacidad del depósito de combustible 13...
Page 70 - TORNILLOS HEXÁGONOS; Especificaciones de par
70 D ATO S T É C N I C O S TORNILLOS HEXÁGONOS Los valores de par indicados se deben utilizar como pauta general cuando no se tenga información de los valores de par específicos. Tornillería estándar de EE. UU. Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut Size ft./lbs Nm ft./lbs N...
Page 71 - R E G I S T R O D E S E R V I C I O; SERVICIO DE ENTREGA; Verificar que el motor tenga la cantidad correcta de aceite
71 R E G I S T R O D E S E R V I C I O SERVICIO DE ENTREGA Acción Fecha, Lectura De Medidor, Sello, Firma Cargar y conecte la batería r Ajustar la presión de los neumáticos de todas las ruedas a 15 psi (1 bar) r Conectar la caja de contacto al cable para el interruptor de seguridad del asiento r Ver...
Page 72 - DESPUÉS DE 10 HORAS; Comprobar el filtro de aire de la bomba de combustible; SERVICIO DE 50 HORAS
72 R E G I S T R O D E S E R V I C I O DESPUÉS DE 10 HORAS Acción Fecha, Lectura De Medidor, Sello, Firma Cambiar el aceite del motor r MANTENIMIENTO DIARIO Acción Fecha, Lectura De Medidor, Sello, Firma Limpiar los residuos del cortacésped r Revisar el nivel del aceite del motor r Comprobar la pres...
Page 73 - SERVICIO DE 100 HORAS
73 R E G I S T R O D E S E R V I C I O SERVICIO DE 100 HORAS Acción Fecha, Lectura De Medidor, Sello, Firma Realizar el mantenimiento después de 25 horas r Realizar el mantenimiento después de 50 horas r Reemplazar el filtro de aceite del motor r Limpiar/reemplazar las bujías r Reemplazar el filtro ...