Husqvarna 520iRX - User Manual

Blade thrust causes and related warnings • Blade thrust is a sudden sideways, forward or backward motion of the machine, which may occur when the blade jams or catches on an object such as a sapling or a tree stump. It can be violent enough to cause the machine and/or operator to be propelled in any...

1. Stop the motor.2. Do a visual check for damage for example, cracks.3. Release and attach the quick release mechanism to make sure that it operates correctly. 4. If the harness has a hip pad and a hip strap, make sure that the quick release function operates correctly. Cutting attachment WARNING: ...

• A defective or incorrect guard can cause injury. Do not use a cutting attachment that does not have an approved guard attached. • Make sure that you assemble the cover and shaft correct before you start the product. • The drive disc and support flange must engage correctly in the centre hole of th...

6. Let the cutting attachment lightly touch the ground. Adjust the harness clamp to balance the product correctly. Note: If you use a grass blade, it must balance approximately 10 cm /4 in above the ground. Operation Introduction WARNING: Read and understand the safety chapter before you use the pro...

To operate the product Automatic shutdown function The product has an automatic shutdown function that stops the product if the product is not used. The green LED for start/stop indication goes off and the product stops after 120 seconds. To start the SavE function The product has a power saving fun...

5. Use a sideway movement from left to right for the return stroke. 6. Do the work rhythmically.7. Move forward and keep feet tightly against the ground. 8. Stop the engine.9. Remove the product from the clip on the harness.10. Put the product on the ground.11. Collect the cut material. To stop the ...

3. Remove the nut that holds the trimmer head and the drive disc. 4. Replace the trimmer head.5. Install the nut.6. Install the line chute assembly.7. Install the trimmer head. To sharpen the grass knife and grass blade WARNING: Stop the product. Use protective gloves. WARNING: Always discard a blad...

Battery Problem Possible faults Possible solution Green LED flashes. Low battery voltage. Charge the battery. Red error LED flashes. The battery is empty. Charge the battery. Temperature deviation. Use the battery in temperatures between -10°C (14°F) and 40°C (104°F). Overvoltage. Remove the battery...

Disposal of the battery, battery charger and product The symbol below means that the product is not domestic waste. Recycle it at a recycling station for electrical and electronic equipment. This helps to prevent damage to the environment and to persons.Speak to local authorities, domestic waste ser...

520iRX Equipped with grass blade (original), left/right 3.1/2.1 Approved batteries Battery BLi200 40-B220X Type Lithium-ion Lithium-ion Battery capacity, Ah 5.2 6.0 Nominal voltage, V 36 36 Weight, kg (lb) 1.3 (2.9) 1.4 (3.1) Approved battery chargers Battery charger QC330 QC500 Input voltage, V 100...

Declaration of Conformity EU Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated Grass Trimmer Brand Husqvarna Type / Model 520iRX Identification Serial numbers dating from 2023...

Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated Grass Trimmer Brand Husqvarna Type / Model 520iRX Identification Serial numbers dating from 2023 and onwards complies fully w...