Page 2 - Contents
Contents Safety Copyright & Glossary Reference STB Connections Remote Control Unit Guide of Functions Guide of Main Menu Motorised System Troubleshooting Guide Menu Map Specification E2 E3 E4 ~ E5 E6 ~ E8 E9 ~ E10 F11 ~ F13 F14 ~ F32 F33 ~ F37 F38 F39 ~ F40 F41 ~ F42 E1
Page 3 - Safety
Safety This STB has been manufactured to satisfy the international safety standards.Please read the following safety precautions carefully. MAINS SUPPLY : 90 - 250 V AC 50/60 HzOVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS :...
Page 4 - is a trademark of France Telecom.; Copyright
Copyright & Glossary E3 • VIACCESS TM is a trademark of France Telecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V.• Irdeto is a trademark of Mindport BV.• Nagravision is a registered trademark of Kudelski S.A.• Conax is a trademark of Telenor Conax AS. HUMAX cannot be held resp...
Page 5 - Reference; of the DiSEqC switch.; Connect a Satellite antenna
Reference E4 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennasto be connected to the STB simultaneously.If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input...
Page 6 - decide when and where to release through satellite system).
Reference HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications. Whenever a problem is found with this software or, in fact, extra functions or enhanced applications are added, the software in the equipment has to be upgraded. In order to m...
Page 7 - STB Connections
, Press to change services down and up. SMART CARD SLOT Insert the SMART CARD with it’s IC-Chip part facing the botton side. ERROR LED(AMBER) Indicates that the STB has an error. STANDBY LED(RED) Indicates that the STB is under standby. OPERATING LED(GREEN) Indicates that the STB is operating. TV/RA...
Page 8 - otherend to a RCA/Cinch socket on your TV.; TV with Terrestrial antenna
STB Connections 1. Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the STB and the otherend to a RCA/Cinch socket on your TV. If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on STB and the other end to a RF input socket on your TV. 2. Connect the c...
Page 10 - Remote Control Unit
Page 12 - Guide of Functions
Guide of Functions The details of service part and event part are automatically displayed on the I-Plate when pressing the i( )button or changing services. I-Plate is divided into service part and event part. SERVICE PART consists of the following items: • I-Plate icon, Current time • Service name, ...
Page 13 - buttons or; To change the audio language:; buttons : Use to select the audio on the left, right or both.; To change the subtitle language:; Use the; Changing Services
To change services, do in the following sequence:1. Press the Numeric buttons(0~9) on the remote control unit.2. Press the buttons or buttons. Or press the Recall( ), Service-list( ), EPG( )modebutton. To switch between TV and Radio services, press the TV/Radio( )button. To select the previous viewe...
Page 14 - Teletext; Service Configuration
Guide of Functions Use your TV remote control unit to control the Teletext service.The teletext button doesn’t exist on the STB remote control unit.When the service supports Teletext, the Teletext icon( ) is displayed on the I-plate. The Service List consists of Service All and Service Favourite.On ...
Page 15 - This menu provides Calendar and Biorhythm.; Guide of Main Menu
Your STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings andstart and ...
Page 16 - To select each mode, use the following buttons:; • Red; To watch a programme you want through the display window:
Guide of Main Menu You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide modePress the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio GuidePress the button on the remote control unit and TV Guide will...
Page 19 - in the system setting mode and then press the OK button.; press the buttons and the language list will be displayed.; press the OK button to finish setting.; • The kind of languages can be changed depending on the country.; Language Setting
Select the language for menu, audio or subtitle.1. Select the highlighted language setting using the buttons in the system setting mode and then press the OK button. 2. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed. 3. Use the ...
Page 20 - Depending on Time Setting, select the time when STB is turned off.; Time Setting
Guide of Main Menu You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup Time mode andSleep Time(standby mode) can be set. When a VCR is connected, recording can be automatically doneaccording to Wakeup/Sleep Time Setting. To set the Current Time, e...
Page 22 - PAL K for Russia; Other Setting
Guide of Main Menu Select an UHF channel. The range of channels and frequency valueare different for each PAL standard: PAL I/G for Europe : CH21 ~ CH69 PAL B for Europe/Australia : CH28 ~ CH69PAL D for China : CH13 ~ CH62 PAL K for Russia : CH21 ~ CH69 Select a PAL standard according to the above r...
Page 24 - • Rename; Then, the keyboard image will be displayed on the screen.; You can use the four direction keys to move or select the services.; Use the buttons to select the previous or; Organise Favourite Services
Guide of Main Menu • Rename 1. Press the White( )button to change the service name. Then, the keyboard image will be displayed on the screen. 2. Key in the new service name. You can use the four direction keys to move or select the services. : to move the previous service: to move the next service: ...
Page 26 - Satellite Name is listed in alphabetical order and the order can; Antenna Setting
Guide of Main Menu Selects the antenna and LNB settings for service search. As you can change the settings for 22KHz Tone and DiSEqC switch,there are 32 possible Antenna Setting for use. The values that are set in this menu will be available for selection inother service searching menus. There are 3...
Page 28 - Manual Search
Guide of Main Menu Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder.The bar on bottom of the submenu shows the signal Level andsignal quality(BER) of the entered parameters. Select the target antenna for Manual Search. Th...
Page 30 - parameters that is preset.; Automatic Search
Guide of Main Menu When you enter the Satellite Name that is set in Antenna Settingmenu, search all of the selected satellite without inputting theextra frequency. Select the target antenna for Automatic Service Search. The attribute of this antenna alternative number is already setin Antenna Settin...
Page 32 - STB Upgrade
Guide of Main Menu You can download and upgrade the software of this STB via ASTRA 1 satellite when the software of new version is released. Do not turn off the STB during downloading.When the power is switched OFF, turn on the STB and the processwill be continued. 3-5. Conditional Access(for Viacce...
Page 34 - Motorised System; DiSEqC 1.2 User Instructions; Satellite Setting Menu Options
Motorised System DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available.The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of thesatellites and to search for the services(STAB Rotor Sat m...
Page 35 - Initial Satellite Position Search; Motor Limit Setting
3. Initial Satellite Position Search This is required when you first set your receiver up to use DiSEqC 1.2 and sets the positions of allpre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated. (Please consult the user ...
Page 36 - Manual Satellite Search
Motorised System 6. To set the East Limit: a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish to use as your East Limit. Use the buttons to stop the motor at the correct position. b) Highlight the Store East Limit option and press the O...
Page 37 - Searching for services on your selected Satellite
Once you have stored the positions of the satellites you want (see left below) you can now search forthe services transmitted from them. Before you can do this, you must move the motor to the position of the satellite you wish to search. To do this, you must access the Satellite Settings menu.Do as ...
Page 39 - Troubleshooting Guide
Page 40 - Menu Map
Page 42 - Specification; MPEG Transport Stream A/V Decoding; Transport Stream; Conditional Access Interface; Viaccess Embedded
Specification Tuner & Channel MPEG Transport Stream A/V Decoding Memory Input ConnectorFrequency RangeInput ImpedanceSignal LevelIFIF Band widthLNB Power &Polarisation 22 KHz ToneDiSEqC ControlDemodulationInput Symbol RateFEC Decode Transport Stream Profile LevelInput RateAspect RatioVideo R...
Page 43 - You can use a special antenna switch with DiSEqC commands.
A/V & Data In/Out Physical Specification Size(W x H x D)Weight(Net)Operating TempStorage TempStorage Humidity 260 x 50 x 180 mm Around 1.3 kg0 °C to + 45 °C-10 °C to + 70 °C5% ~ 95% RH(Non-Condensing) Power Supply Input VoltageTypePower ConsumptionStandby PowerProtection 90 - 250 V AC, 50/60 HzS...
