Humax ND-1200C - Manual

Safety and Warning 4 This digital cable Set-Top Box has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 90 - 250V AC 50HzOperate your product only from the type of power sourc...

5 9. LIGHTNING, STORM, or NOT IN USE Unplug the product from the wall outlet and disconnect the Cable input during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. 10. EXTRANEOUS OBJECTS Do not insert ...

Security Instructions For your security and to prevent damage, please read the following safety instructions carefully. 6

8 Contents 1. Before using the Set-Top Box 1.1 Package contents 1.2 Front Panel 1.3 Rear Panel 1.4 Remote Contro l 2. Setup 2.1 Connecting the Set-Top Box 2.2 Powering On 2.3 Configuration of the Set-Top Box 3. Watching a Cable Channel 3.1 Turning the TV on for the first time after configuring Set-t...

1. Before using the Set-Top Box 10 This chapter describes detailed instructins on the product and its accessories. 1.1 Package Contents Please check all package contents before using your Set-Top Box. Set-Top Box RCA Cable

Safety 11 1. STANDBY LED Red light is emitted when the product is in STANDBY mode. While watching the analog Fee-To-Air Channels, the Set-Top Box should be in the STANDBY mode. 2. SMART CARD SLOT Slot for a smart card. The Smart Card is to be placed in the slot with the red arrow “Insert card this w...

2. Setup 14 This chapter describes how to set up the Set-Top Box. Select the most appropriate procedure depending on your requirements. Note: If you encounter any problem when setting up the Set-Top Box, please contact your local Cable Operator or Area office. 2.1 Connecting the Set-Top Box Connecti...

15 2.2 Powering On 1. Connect the power cord of the Set-Top Box to a wall outlet. 2. Power on by pressing POWER ( )button on the Remote Control. 2.3 Configuration of the Set-Top Box Since the process of configuring the Set-Top Box involves certain Network parameters, you are requested to get the sam...

16 3. Watching a Cable Channel 3.1 Turning the TV on for the first time after configuring Set-Top Box The following figure illustrates the screen that appears when you turned on the TV for the firsttime. When you switch on and change the channel for the first time, the Programme banner caption appea...

17 4. You can go to Main Menu and select the Programme ( )icon and select “Programme Filter” and select by genre. For more information refer to Using the EPG section. 5. You can go to Main Menu and select the Channel ( )icon and using the button, select the desired channel. 6. While viewing the “Pro...

18 4. Using the EPG (Electronic Programme Guide) 4.1 EPG (Electronic Programme Guide) Screen Overview This section describes the various components and screens of the EPG. Pressing the EPG ( )button displays the following Programme Guide grid.In this screen, you can view the Programme details of eac...

20 4. Using the EPG (Electronic Programme Guide) This is the Main page which lets you access all the features of the Set-Top Box through the7 icons at the top. Each icon has a sub-menu. The function of each icon on the EPG menu are as follows.1. Channels2. Programmes3. Help4. B-Mail5. Personal Setti...

OVERVIEW OF FREQUENTLY USED FUNCTIONS In this section, you can learn about how to use several frequently-used functions of EPG. • Programme Guide • Favourite Channel • Programme Category Search • Parental Control 5.1 Using the Programme Guide You can select the Programme Guide in two ways. • Either ...

24 Select buttons on the Remote Control, and press the OK ( )button. If your desired Programme is a Programme to be broadcast later, the Programme reservation screen appears. • To reserve a Programme, select your desired Programme using the buttons, and the OK ( )button. • The Programme reservation ...

26 5.2 Using Favourite Channel The Favourite channel function enables subscribers to select and watch Favourite channelseasily by using a single button on the Remote Control, once programmed. Favourite channel configuration procedures are described below. 1. Select the Programmes ( )icon from the ic...

27 4. When you have configured a Favourite Channel, you can watch the channel by pressing the FAV ( )button on the Remote Control or by entering the number channel nember900 - 919 on the Remote Control. 5. The favourite channels will also appear in the EPG grid, once programmed. 6. While in the favo...

5.3 Searching by Programme Types This function enables subscribers to easily find the channel that displays the desired type ofcurrent Programme by the programme type e.g Movies, Education etc.. 1. While turning on the TV, press the MENU ( )button to enter the Main Menu 2. Select the Programmes ( )i...

4. Select your desired Programme and press the OK ( )button. The Set-Top Box automatically tunes your TV to the selected programme. Note: The following types of Programme categories are available. 1. Movies 2. News/Current Affairs3. Serials/Game Shows4. Sports5. Children’s/Youth6. Music/Ballet/Dance...

5.4 Using Parental Lock Function This function enables subscribers to control viewing of content for the protection of children and teenagers based on the rating of the broadcaster content. Note: This function does not limit individual programmes but limits channels such as Movies, based on the Prog...

31 Press OK and the following screen will appear. 3. Input PIN code and then specify desired rating from the options displayed using the button, and press OK ( )button. In the illustration above, all content of the rating U and UA will be locked. The symbol indicates that the rating has been selecte...

5.5 Other function of EPG Until now, this manual described frequently used functions in the EPG. Now this section describes other functions provided by the EPG. Note: This is the Main page which lets you access all the features of the Set-Top Box throughthe 7 icons at the top. Each icon has a sub-me...

35 2. Programmes The Programme menu has 5 sub-menus as displayed on the screen below: • Programme Guide In this screen you can view the Programme Guide grid for future.For more information on using this function, refer to the Overview of Frequently-Used Functions in the previous section. • Favourite...

36 5. Functions Guide • Reserved Programmes You can reserve a program that is to be broadcast in future using this function. At that particular day and time, the TV set if ON, will automatically switch to the selected programme. For more information on using this function, refer to the Overview of F...

40 5. Functions Guide Caution: This function is for installation personnel only. Please do not use this function, if you are not familiar with the procedures forconfiguration of Set-Top Box environment. The selected screen consists of the following 5 menus. Each menu provides the following function....

41 • Diagonistics Set-Top Box hardware/software information display. To view information on the operational environment of the Set-Top Box, complete the following procedures. 1. Select ‘Diagonistics’ in ‘System Settings’ screen and then press the OK ( )button. 2. A new window appears displaying all ...

45 Precautions • Copyright(c) 2007 HUMAX Corporation. • Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of copyright and copyright law. • The information in this document is subject to change without notice for enhancement o...

Input VoltageType RF/Loop-through Output ConnectorOutput levelFrequencyOutput ChannelTV standardPreset Channel AC 90~250, 50HzSwitching Mode Power Supply(SMPS) Power Consumption Max. 8 W Stand-by: Max. 7 W F -Type Female72 dBuV470 MHz to 862 MHzUHF, CH 21-CH 69PAL GSoftware changeable by Menu (Defau...

Slot Size (W x H x D)Weight(Net)Operating TemperatureStorage TemperatureAccessories Remote Control Unit 1 Smart Card Indicators 1 LED (2 Colors) : Power On / Standby 215 x 41 x 158 mm0.85 kg Remote Control, User Manual, 2 Batteries(AAA)RCA Cable 32 keys- NUMERIC button(0-9)- EPG, MUTE, TV, BACK, OK-...