Huawei F610 - Manual - manualsarea.com

Page 3 - Appearance; Front View

2 Appearance The figures in this guide are provided for your reference only. Front View 1 Left function key Select the option displayed in the lower left corner of the screen. 2 Navigation keys  Access the main menu by pressing the OK key in standby mode.  Access a shortcut menu by pressing the co...

Page 4 - Screen Icons; Installation; Installing the SIM Card

3 Screen Icons Signal strength Battery level Call in progress No network available Hands-free mode Phone powered by the power adapter Installation Installing the SIM Card Ensure that the phone is powered off and disconnected from the power adapter. When installing the SIM card, ensure that the golde...

Page 5 - Installing the Battery

4 aligned with that of the SIM card slot. Then check that the SIM card is fully inserted. Do not frequently remove the SIM card when using the phone. Installing the Battery Before using the phone, install the battery properly. When installing the battery, ensure that the phone is powered off and is ...

Page 6 - Powering On the Phone; Call Functions; Making a Call; Answering or Rejecting a Call; Creating a Message

5  When you use the phone, it is recommended that you connect the power adapter to the phone. When using the battery to power the phone, ensure that the battery power is sufficient. Powering On the Phone To power on the phone, press and hold the end key until the screen lights up.  The phone will ...

Page 7 - Reading a Message; Text Input Methods; Switching Between Input Methods

6 3. Press the OK key and then add a recipient using the following methods:  Enter the recipient's phone number.  Add the recipient from the phonebook. 4. Press the OK key to send the message. Reading a Message The phone stores received messages in the inbox. 1. Select Messages > Inbox . 2. Pre...

Page 8 - Number Input; Phone Lock; Keypad Lock; PIN and PUK; FAQs; Phone Cannot Be Powered On

7 Number Input In 123 input mode, enter a desired number by pressing the number key. Settings To configure and customize your phone settings, select Settings . Phone Lock To set the phone lock, select Security > Password lock > Phone lock . You can change the default phone lock code ( 0000 ) t...

Page 9 - Battery Cannot Be Charged; Signal Strength Is Weak; Call Volume Is Too High or Too Low; Warnings and Precautions; Electronic Device

8 No Information Is Displayed on the Phone Screen If the phone is not used for a long time and the battery runs out of power, the phone may not display any information when it is being charged. This is a normal phenomenon. The phone can be powered on after the battery is charged for a while. Battery...

Huawei F610 - Manual

Table of Contents:

Summary

Other Huawei Models