Huawei HG532S - Manual

3  Ensure that the power adapter meets the specifications indicated on the device nameplate.  Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and it is tested and approved according to national or local standards.  For pluggable device, the socket-outlet...

7 Italy : For private use, a general authorisation is required if WAS/RLAN's are used outside own premises. For public use, a general authorisation is required. Norway : This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund. Federal Communica...

8 2 Connecting the Cables and Getting Started Thank you for purchasing the HG532s Home Gateway (hereinafter referred to as the HG532s). You can go online using the ADSL and USB modem services. However, you can only use one type of service at one time. The default way of going online is using the ADS...

9 2.2 Connecting Cables Using the USB Port If you do not have ADSL service in your home, you can go online using the USB modem service (through the USB port). If you have ADSL service in your home and want to go online using the USB modem service, make sure that the ADSL port is not connected to a r...

10 2.3 Powering On the HG532s After connecting the cables, press the On/Off button on the side panel to power on the HG532s. After you power on the HG532s, the Power indicator light turns on. − When connecting cables using the ADSL port, The ADSL indicator lights up and starts blinking. This indicat...

11 3 Setting Network Access Parameters 3.1 Logging in to the Web-Based Configuration Utility Most parameters of the HG532s are preset before delivery to meet common application scenarios at homes. To check the HG532s's working status or to configure certain advanced network functions, use the web-ba...

12 3.2 Configuring a Wireless Account The configuration wizard page is displayed when wireless parameters have not been modified. To set the wireless network name and password for wireless connections on the wizard page, do as follows: Step 1 Log in to the HG532s's web-based configuration utility. S...

13 Step 6 In ISP Name , enter a name for the dial-up connection, and click Next . Step 7 Select Anyone's use or My use only , and click Next . Step 8 Enter the user name and password provided by your operator for dial-up connections, and click Next . Step 9 Select Add a shortcut to this connection t...

14 Step 1 Press and hold the WPS button for over 1 second on the side panel of the HG532s. The WPS indicator on the HG532s starts blinking, indicating that the HG532s is in the WPS negotiation state. Step 2 Within 2 minutes, enable the WPS negotiation function on the computer. Wait for a while, the ...

16 5 Using the USB Port 5.1 Going Online Using a USB Modem By default, the HSPA uplink service is enabled. When the HG532s is working in USB modem mode, connect the USB modem to the HG532s so that your device can access the Internet through the HSPA uplink service. − If your USB modem does not need ...

18 5.3 Accessing a Printer Using the Printer Server The HG532s supports a printing function. After a printer is connected to the USB port, you can configure the HG532s through the FTP server to access and use the printer. For details about how to use the printer: Step 1 Log in to the HG532s's web-ba...

19 6 Maintenance Guide 6.1 Changing the User Name and Password for the Web-Based Configuration Utility For security reasons or to make the password easy to remember, you can change the user name and password for the web-based configuration utility. To change the user name and password for login: Ste...

20 6.2 Enabling or Disabling the Wireless Network Function There are two methods for enabling or disabling the wireless network function. Using the WLAN Button To enable or disable the wireless network function, press the WLAN button on the side panel of the HG532s. The WLAN indicator indicates the ...

21 Step 3 Click the WLAN tab. Step 4 Select Enable WLAN . Step 5 In SSID , enter a wireless network name. Step 6 For Security, select WPA-PSK/WPA2-PSK . In WPA pre-shared key , enter a password. Use the default settings for other parameters. Step 7 Click Submit . You must remember the password you s...

22 6.5 Restoring Default Settings If you restore the HG532s to its default settings, all customized user data will be lost. Use this function only when necessary. To restore the HG532s to its default settings, power on the HG532s, press and hold the Reset button on the rear panel for over 6 seconds,...

23 7 FAQs How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over 1 second, and then release the button. The WLAN indicator indicates the status of the wireless network function. How can I quickly restore the HG532s to its default settings? To resto...

29 8 Technical Specifications 8.1 Indicators Indicator Status Description Power On The HG532s is powered on. Off The HG532s is powered off or faulty. Internet Blinking  The HG532s is working in routing mode, and it is connected to the Wide Area Network (WAN).  Data is being transmitted. On  The H...

31 Indicator Status Description USB Blinking  The HG532s is being activated through USB modem.  Data is being transmitted on the USB port. Steady on  The HG532s is activated through USB modem.  The USB port is connected by portable storage device. Off  The USB port is not connected.  The HG532...

33 8.3 Default Settings Parameter Default Settings LAN IP address 192.168.1.1 LAN subnet mask 255.255.255.0 User name for web-based configuration utility login user Password for web-based configuration utility login user Wireless network name ( SSID ) for wireless connection See the label printed on...