HTC HS S168 - Manual

6 SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local po...

8 SAFETY IN AIRCRAFT Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, reme...

9 SAFETY PRECAUTIONS FOR RF EXPOSURE • Avoid using your device near metal structures (for example, the steel frame of a building). • Avoid using your device near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio. • Use only original manufacturer-approved accessori...

11 General Precautions • Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside these compartments should be done by an authorized service technician or provider. • Damage requiring servi...

13 Contents Chapter 1 Getting Started 17 1.1 Getting to Know Your PDA Phone and Accessories ..................... 181.2 Installing the USIM/SIM Card and Battery ................................... 221.3 Installing a Storage Card ............................................................... 251.4 S...

Chapter 1 Getting Started 1.1 Getting to Know Your PDA Phone and Accessories 1.2 Installing the USIM/SIM Card and Battery 1.3 Installing a Storage Card 1.4 Starting Up 1.5 The Today Screen 1.6 The Start Menu 1.7 Quick Menu1.8 HTC Home™ 1.9 TouchFLO™ 1.10 Status Icons 1.11 Programs 1.12 Settings

18 Getting Started 1.1 Getting to Know Your PDA Phone and Accessories Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Left panel Right panel VOICE COMMAND • Press to activat...

Getting Started 19 Front panel INTERNET EXPLORER See Chapter 10 for details. Notification LEDs * See description below. Earpiece Listen to a phone call from here. Touch Screen TALK Press to answer an incoming call or dial a number. NAVIGATION WHEEL/ENTER • Use to scroll left, right, up, or down. • R...

20 Getting Started Back panel Speaker 3 Megapixel Camera See Chapter 12 for details. Back Cover Slide the back cover downward to remove it. GPS Antenna Connector Peel off the rubber cap and connect an external GPS antenna for better GPS signal reception. Note Use only the external GPS antenna with m...

Getting Started 21 Accessories 9 1 5 4 7 User Man ual Read Me First 3 8 Screen Protector 2 6 No. Accessory Function 1 Battery Insert into the device before turning it on. 2 Screen protector Protects the touch screen from scratches. 3 Stereo headset Provides a volume control slider and a Send/End but...

22 Getting Started 1.2 Installing the USIM/SIM Card and Battery Always turn off your device before installing/replacing the USIM/SIM card and battery. The USIM/SIM card contains your phone number, service details, and phonebook/message memory. Your device supports both 1.8V and 3V SIM cards. Some le...

Getting Started 23 To remove the back cover Before installing the USIM/SIM card or battery, remove the back cover. 1. Make sure your device is turned off. 2. Slide the back cover off to remove it. To install the USIM/SIM card 1. Make sure your device is turned off. 2. Push the SIM card holder to the...

24 Getting Started To remove the USIM/SIM card 1. Remove the battery if it is installed. 2. Push the USIM/SIM card in to unlock the SIM card holder. 3. Flip the SIM card up, and then remove the SIM card. To install the battery Install the battery by aligning its exposed copper contacts with the batt...

Getting Started 25 1.3 Installing a Storage Card A storage card slot is located on the right side of your device. To have additional storage for your images, videos, music, and files, you can purchase a microSD TM card and insert it into the slot. To insert a microSD card 1. Pry open the storage car...

26 Getting Started 1.4 Starting Up After inserting your USIM/SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power • Press and hold the POWER button for a few seconds.When you turn on your device for the firs...

Getting Started 27 To automatically configure data connection settings 1. When you see the notification message from the Connection Setup, tap Yes . Note If you do not see the notification message, tap on the title bar to display the message. If your SIM card supports multiple network operator profi...

28 Getting Started Calibrate the device Calibrating the touch screen involves tapping the center of a cross with the stylus as the cross moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.If your device does not accurately respon...

Getting Started 29 You will still be able to receive messages and calls while your device is in Sleep mode. Pressing the POWER button again or incoming calls/messages will wake up your device. 1.5 The Today Screen The Today screen displays important information, such as upcoming appointments and sta...

30 Getting Started 1.6 The Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus. View Help information for the curren...

Getting Started 31 1.7 Quick Menu The Quick Menu, located at the top right corner of the Today screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Tap this button to open the Quick Menu. • To swi...

32 Getting Started To switch between the different components of HTC Home Do any of the following: • Touch the tabs in the toolbar using your finger. • Tap the tabs in the toolbar using the stylus. • Use the NAVIGATION CONTROL. If the toolbar is not selected, press NAVIGATION up/down first to select...

Getting Started 33 Weather Weather shows you the current weather as well as weather information for the next four days of the week. The first time you use this feature, you need to select your city first to download weather information. To select your city 2 1 3 4 1. Select the Weather tab ( ). 2. T...

34 Getting Started Weather for the next 4 days Tap this area to return to the current day’s weather. Current day’s weather Tap this area to view weather information for the next four days of the week. Tap this area to select another city. Shows the time that has elapsed since the last download of we...

Getting Started 35 Clear this check box if you prefer to manually download weather information. • Download when roaming . Select this check box only if you want to allow automatic download of weather data when roaming. This may incur additional costs. • Temperature Scale . Choose whether to display ...

36 Getting Started Touch a shortcut to remove it. Return Note To replace a shortcut, you must delete it first and then add a shortcut to a program or setting. Sound Sound provides a selection of profiles, each preconfigured with a different volume setting. It also lets you quickly change the ring to...

Getting Started 37 1.9 TouchFLO™ TouchFLO™ is a special feature that gives you a better touch panel experience on your device. With TouchFLO, you can use your thumb or fingers to scroll and pan the screen.TouchFLO also features the Touch Cube where you can launch messaging programs, Internet Explore...

38 Getting Started To navigate the Touch Cube The Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your thumb left or right on the touch screen. Touch Cube screens There are three sides to the Touch Cube interface: • On the first side of ...

Getting Started 39 Select an empty slot to add a favorite contact. If the contact has more than one contact number, select the number to call when you touch the contact. Open Call History. (See Chapter 3 for details.) Tap to call the number associated with the contact. Tap and hold to display the Co...

Getting Started 41 Finger scrolling and finger panning With TouchFLO, you can use finger scrolling and finger panning when viewing content that cannot be fit entirely on the screen, such as Web pages, documents, and messages. Finger scrolling can also be used to scroll up and down lists such as the ...

42 Getting Started To use finger panning • To pan downward, touch and hold on the touch screen then drag your finger upward. • To pan upward, touch and hold on the touch screen then drag your finger downward. • To pan towards the right, touch and hold on the touch screen then drag your finger to the...

Getting Started 43 To go to the next or previous message While reading a message, slide your finger across the screen to go to the next or previous message. To go to the next message, slide your finger from right to left on the screen; To go to the previous message, slide your finger from left to ri...

44 Getting Started 1.10 Status Icons The following are some of the status icons that you may see on the device. Icons that appear in this area GPRS availableEDGE available HSDPA available UMTS availableWi-Fi function enabled, but device not connected to a wireless network yet Connected to a wireless...

Getting Started 45 Icons that appear in this area Battery chargingBattery fullBattery very low Icons that appear in this area Vibrate modeSound onSound off Icons that appear in this area GPRS connecting GPRS in use EDGE connecting EDGE in use HSDPA connecting HSDPA in use UMTS connecting UMTS in use...

46 Getting Started 1.11 Programs The following are programs you can find on your device or install from the Applications Disc. Programs in the Start Menu Icon Description Phone Make and receive calls, switch between calls, and set up conference calling. Calendar Keep track of your appointments and c...

Getting Started 47 Icon Description Adobe Reader LE View PDF (Portable Document Format) files on your device. Audio Booster Enhances your music experience by providing you with controls for adjusting equalizer, 3D sound, treble, and bass settings. Audio Manager Browse for music files by organizing m...

48 Getting Started Icon Description Pictures & Videos View, organize, and sort pictures, animated GIFs, and video files on your device or a storage card. QuickGPS Downloads satellite data over the Internet via ActiveSync, Wi-Fi or GPRS to speed up the time for determining your current GPS positi...

Getting Started 49 Icon Description Windows Live Use this mobile version of Windows Live™ to find information on the Web. It also lets you sign into your Windows Live account so that you can access your Live Mail messages and send/receive instant messages in Live Messenger. Windows Media Player Mobi...

50 Getting Started Icon Description Today Customize the appearance and the information to be displayed on the Today screen. Voice Speed Dial Create voice tags for voice dialing contacts and USIM/ SIM contacts as well as for launching programs. System tab Icon Description About This is where you can ...

Getting Started 51 Icon Description External GPS Set the appropriate GPS communication ports, if required. You may need to do this when there are programs on your device that access GPS data or you have connected a GPS receiver to your device. See Help for details. Key Lock Lock the buttons on your ...

52 Getting Started Connections tab Icon Description Beam Set your device to receive incoming Bluetooth beams. Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other Bluetooth devices. Comm Manager Manage your device’s connections (including Wi-Fi, GPRS, and Bluetooth), turn...

Chapter 2 Entering Text and Searching for Information 2.1 Entering Information 2.2 Using the On-screen Keyboard 2.3 Using the Touch Keyboard 2.4 Using the Touch Keypad 2.5 Using the Symbol Pad 2.6 Using Letter Recognizer 2.7 Using Block Recognizer 2.8 Using Transcriber 2.9 Searching for Information

54 Entering Text and Searching for Information 2.1 Entering Information When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you ...

Entering Text and Searching for Information 55 2.2 Using the On-screen Keyboard When using Windows Mobile’s standard on-screen Keyboard , you can enter text by tapping keys on the keyboard that is displayed on the screen. To enter text using the on-screen Keyboard 1. In a program, tap the Input Sele...

56 Entering Text and Searching for Information To enter text using the Touch Keyboard 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, and tap Touch Keyboard . 3. On the last row of the Touch Keyboard, tap the second key from the left to cycle through...

Entering Text and Searching for Information 57 4. On the XT9 Settings screen, select or clear the following options according to your preferences: • Spell Correction . Lets you correct typographical errors by selecting from a list of possible words that reflect the characters of the keys you have ta...

58 Entering Text and Searching for Information 2.4 Using the Touch Keypad The Touch Keypad is a 12-key on-screen keypad that has a similar layout as mobile phone keypads, plus some additional keys. Touch Keypad has large keys and enhanced input features such as XT9 predictive input, which makes it f...

Entering Text and Searching for Information 59 2.5 Using the Symbol Pad Symbol Pad provides a comprehensive list of common symbols such as parentheses, braces, currency signs, and more, as well as punctuation marks and special characters. The Symbol pad is available when using both the Touch Keyboar...

60 Entering Text and Searching for Information 2.6 Using Letter Recognizer With Letter Recognizer , you can write individual letters, numbers, and punctuation marks, which are then converted into typed text. Note Letter Recognizer is available when text entry is possible. To use Letter Recognizer 1....

Entering Text and Searching for Information 61 2.8 Using Transcriber Transcriber is a handwriting recognition program that enables you to write in cursive, print, or a combination of both. To write using Transcriber 1. Start a program that accepts user input, such as Word Mobile. 2. Tap the Input Se...

62 Entering Text and Searching for Information 2.9 Searching for Information You can search for files and other items stored in My Documents folder or on an installed storage card of your device. You can search by file name or by words located in the item. For example, you can search in e-mail messa...

Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 Making a Video Call 3.5 Receiving a Video Call 3.6 Smart Dialing 3.7 Additional Dialing Information 3.8 Setting Up Bluetooth SIM Access for Car Kit Phones

64 Using Phone Features 3.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. You can also dial directly from Contacts, and easily copy phonebook entries from your SIM card to Contacts on your device. The Phone screen F...

Using Phone Features 65 To enable or disable Airplane Mode Another way to turn off the phone function is to switch your device to Airplane Mode . When you enable Airplane Mode, all wireless radios on your device are turned off, including the phone function, Bluetooth, and Wi-Fi. When you disable Air...

66 Using Phone Features 3.2 Making a Call With your device, you can make a call from Phone , Contacts , TouchFLO , Speed Dial , Call History , and SIM Manager . Make a call from Phone 1. Tap Start > Phone . 2. On the Phone keypad, touch the keys with your finger or tap the keys using the stylus t...

Using Phone Features 67 To choose one of the numbers of a contact to dial By default, the mobile phone number (m) of a contact is dialed when you make a call from Contacts. However, you can specify that a different phone number is dialed instead. 1. Tap Start > Contacts . 2. Select the contact. 3...

68 Using Phone Features One-touch Speed Dial Use Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can tap and hold the number 2 key on the Phone screen to dial the contact’s number. Before you can create a Speed D...

Using Phone Features 69 Make a call from SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer SIM phonebook entries to Contacts on your device, and make a call from your SIM card. To call a SIM contact 1. Tap Start > Programs > SIM Manager . Wait for your SIM card...

70 Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call...

Using Phone Features 71 3.4 Making a Video Call Your device allows you to make video calls when you are within a 3G network coverage area. You need to use a 3G enable SIM card to make video calls. To make a video call Do any of the following: • On the Phone keypad, tap the phone number to call, then...

72 Using Phone Features 1 Status area . Displays your service provider name, the other party's information, and call timer. 2 Image display area . Displays your image and the other party's image, depending on the selected Swap Image setting. 3 Camera On/Off . Tap to turn the camera on and off. When ...

Using Phone Features 73 To adjust the brightness You can adjust the brightness of the display image. When you press NAVIGATION up or down or rotate the NAVIGATION WHEEL during a video call, a brightness bar appears at the bottom the screen. • Press NAVIGATION right or rotate the NAVIGATION WHEEL cou...

74 Using Phone Features General tab • Show still image . Select the image you want to display when you turn off the camera. • Preset (female) . Displays a female picture in place of your image. • Preset (male) . Displays a male picture in place of your image. • Custom image . Lets you use an image f...

Using Phone Features 75 3.5 Receiving a Video Call To answer or reject an incoming video call • To answer the video call, tap Answer, or press TALK on your device. • To reject the video call, tap Ignore , or press END on your device. To end a video call Once an incoming or outgoing video call is in ...

76 Using Phone Features If the matching list is long and you want to narrow down the search further, enter another letter. Using the same example above, if you continue to tap “3” which is associated with [d, e, f ], the matching list will be narrowed down to the following names: “ Be n Miller”, “Ge...

Using Phone Features 77 3.7 Additional Dialing Information Make an emergency call Enter the international emergency number for your locale, and press the TALK button on your device. Tip Additional emergency numbers may be included in your SIM card. Contact your service provider for details. Make an ...

78 Using Phone Features 3. On the BT Remote SIM Access screen, select the Remote SIM Access check box then tap Done . 4. Connect the car kit phone to your device via Bluetooth. To learn how to connect, consult your car kit phone’s manual. 5. If this is the first time you are pairing the car kit phon...

Chapter 4 Setting Up Your Device 4.1 Basic Settings 4.2 Personalizing the Today Screen 4.3 Protecting Your Device

80 Setting Up Your Device 4.1 Basic Settings Time and date To set the time and date 1. Tap Start > Settings > System tab > Clock & Alarms > Time tab. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the ...

Setting Up Your Device 81 To set the backlight to dim after a time delay 1. Tap Start > Settings > System tab > Backlight . 2. Tap the Battery power or External power tab. 3. Select the Turn off backlight if device is not used for check box, and specify the time delay. To increase or decrea...

82 Setting Up Your Device Tips • You can use *.wav , *.mid , *.mp3 , *.wma , or other types of sound files that you downloaded from the Internet or copied from your PC as ring tones. For a complete list of supported audio file formats for ring tones, see "Specifications" in the Appendix. • T...

Setting Up Your Device 83 Phone services Your device can directly link to the mobile phone network, and enable you to access and change the settings of various phone services for your device. Phone services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact your wireless service...

84 Setting Up Your Device To display owner information Having owner information displayed on the Today screen makes it easier for someone to return your device to you if it is lost. 1. Tap Start > Settings > Personal tab > Owner Information . 2. On the Identification tab, enter your persona...

Setting Up Your Device 85 4. Do any of the following: • Under Display number of , select the type of tasks you want to appear on the Today screen. • In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks. For more information about creating...

86 Setting Up Your Device To set a device password 1. Tap Start > Settings > Personal tab > Lock . 2. Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be idle before a password is required. 3. In the Password type box, select th...

Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.6 Synchronizing Music and Video

88 Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device. The following types of information can be synchronized between your computer and your device: • Microsoft Outlook ® information ...

Synchronizing Information With Your Computer 89 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® Microsoft Windows Mobile ® Device Center is the replacement for Microsoft® ActiveSync® on Windows Vista®. Note Some versions of Windows Vista come with Windows Mobile Device Center already ...

90 Synchronizing Information With Your Computer Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista® computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Set...

Synchronizing Information With Your Computer 91 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started Disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows syste...

92 Synchronizing Information With Your Computer 5.4 Synchronizing With Your Computer Connect and synchronize your device with your PC using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or PC. From your device • Tap Start &...

Synchronizing Information With Your Computer 93 3. To change synchronization settings for an information type, for instance, E-mail , select it and tap Settings . You can then set the download size limit, specify the time period of information to download, and more. Notes • Some information types su...

94 Synchronizing Information With Your Computer 2. On your device, tap Start > Programs > ActiveSync . 3. Make sure that Bluetooth on both your device and the computer are turned on and set to visible mode. For more information, see “Bluetooth” in Chapter 10.If this is the first time you have ...

Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts 6.2 SIM Manager 6.3 Calendar 6.4 Tasks 6.5 Notes 6.6 Voice Recorder

96 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts Contacts is your address book and information storage for people and businesses you communicate with. You can create the following types of contacts on your device: • Outlook contacts . Contacts that are stored on your d...

Organizing Contacts, Appointments, Tasks, and Other Information 97 This photo appears on the Phone screen when you receive a call from the contact. 5. To assign a ring tone to the contact, tap the Ring tone field, scroll through the list of tones, then select a desired tone. 6. When finished, tap OK...

98 Organizing Contacts, Appointments, Tasks, and Other Information 3. Touch the name of a contact to open his or her contact card.On the contact card, you will see the last outgoing or incoming call as well as detailed information such as phone numbers of the contact, e-mail address, and more. To fi...

Organizing Contacts, Appointments, Tasks, and Other Information 99 To group similar contacts You can group similar contacts for easier management by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories . 3. Select a preset category such...

100 Organizing Contacts, Appointments, Tasks, and Other Information 1. Tap Start > Contacts , then select a contact. 2. Tap Menu > Send as vCard . 3. A new MMS message is created with the vCard file attached. Enter the mobile phone number or e-mail address of the recipient then tap Send . For ...

Organizing Contacts, Appointments, Tasks, and Other Information 101 By default, /M, /W and /H are appended to indicate mobile, work and home phone numbers respectively. You can edit this indicator first before you start copying contacts to your SIM card. Indicators of the other types of phone number...

102 Organizing Contacts, Appointments, Tasks, and Other Information 6.3 Calendar Use Calendar to create appointments, including meetings and other events. You can also synchronize Calendar appointments between your device and PC. Create appointments To schedule an appointment 1. Tap Start > Calen...

Organizing Contacts, Appointments, Tasks, and Other Information 103 4. Set the time when you want the reminder to alert you. 5. Tap OK to return to the calendar. View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day , Week , Month ...

104 Organizing Contacts, Appointments, Tasks, and Other Information Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1. Tap Start > Calendar . 2. Schedule a new appointment, or open an existing one and tap Me...

106 Organizing Contacts, Appointments, Tasks, and Other Information To set the default reminder for all new tasks 1. Tap Start > Programs > Tasks . 2. Tap Menu > Options . 3. Select the Set reminders for new items check box. 4. Tap OK to return to the task list. Note The new tasks must have...

Organizing Contacts, Appointments, Tasks, and Other Information 107 6.5 Notes Using Notes , you can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and more. To create a note 1. Tap Start > Programs > Notes . In the note list, tap...

Organizing Contacts, Appointments, Tasks, and Other Information 109 6.6 Voice Recorder Voice Recorder lets you record your voice and then quickly send it in an MMS or e-mail, beam it, or set the recorded voice as your ring tone. Note Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Ra...

110 Organizing Contacts, Appointments, Tasks, and Other Information To beam the voice recording 1. Select the voice recording(s) you want to beam then tap Menu > Beam File . Tip To select multiple recordings, tap and drag over the desired recordings or tap Menu > Select All . 2. Tap the device...

Chapter 7 Exchanging Messages 7.1 Messaging 7.2 Text Messages 7.3 MMS 7.4 Types of E-mail Accounts 7.5 E-mail Setup Wizard 7.6 Using E-mail

112 Exchanging Messages 7.1 Messaging Messaging is where your text messages (SMS), multimedia messages (MMS), and e-mails are located. When you receive new messages, you can open them from the Today screen by tapping the type of message that you want to open. New e-mail messages New SMS and MMS mess...

Exchanging Messages 113 To automatically add a signature in outgoing messages You can automatically add your name and other information as your signature in outgoing SMS, MMS and e-mail messages by following these steps: Tip You need to specify your signature for each type of messaging account. 1. T...

114 Exchanging Messages 5. A new text message is then created.To add more recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To if you want to add mobile phone numbers from Contacts . 6. Enter your message. • To quickly add common message...

Exchanging Messages 115 7.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message. Notes • Multimedia messaging is a charged service and has to be provisioned on your mobile account. Please contact ...

116 Exchanging Messages • Server address . URL address of the server where MMS messages are stored. • Connect via . Select the connection that your device uses for MMS messages. • Send limit . Select the maximum MMS message size allowed by your wireless service provider. • WAP version . Select eithe...

Exchanging Messages 117 5. Tap the Insert icon ( )to select and insert a photo or video clip. When selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing. • Tap to take a photo and insert it into the MMS message. • Tap...

118 Exchanging Messages To add an audio clip to an MMS message You can add one audio clip per slide in your MMS message. 1. Tap Insert audio on your MMS message. By default, My Documents will be shown. Tap My Music or another folder that contains audio files. When navigating folders, tap the Down ar...

Exchanging Messages 119 To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS m...

120 Exchanging Messages 7.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup Wizard lets you easily set up your personal and work e-mail accounts. You can add an e-mail account from an Internet Service Provider (ISP) or other e-mail provider as well as web-based accounts such as Gmail®, Yahoo!® Mai...

Exchanging Messages 121 Note If Auto Setup is unsuccessful, select Internet e-mail from the Your e-mail provider list on the next screen. You will also be asked to enter e-mail server settings during the setup process. See “To specify e-mail server settings” for details. 4. Enter your name. You can ...

122 Exchanging Messages To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap Review all download settings to choose download options, message format, and other settings. Options Description Automatic Send/Receive You can selec...

Exchanging Messages 123 7.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create and send messages To compose and send a message 1. Tap Start > Contacts . 2. Slide your finger upward on the touch screen to scroll down the contac...

124 Exchanging Messages Filter the Inbox message list When the Inbox on your device is full of messages, it may be difficult to browse and locate a desired message. You can filter your Inbox to display only the messages that contain a particular sender or subject you are searching for. To filter you...

Exchanging Messages 125 To download an attachment An attachment appears below the subject of the message. Tapping the attachment opens the attachment if it has been fully downloaded or marks it for download the next time you send and receive e-mail. Notes • If there are multiple attachments in the m...

126 Exchanging Messages 5. If the e-mail does not download immediately, tap Menu > Send/ Receive . 6. If images do not immediately appear on the message, tap Internet pictures blocked then tap Download Internet pictures . 7. Tap Menu and choose whether to reply or forward the message. 8. Enter yo...

Exchanging Messages 127 Customize e-mail settings To change the download size and format for Outlook e-mail 1. Disconnect your device from the computer. 2. Tap Start > Programs > ActiveSync . 3. Tap Menu > Options , select E-mail , then tap Settings . 4. On the E-mail Sync Options screen: •...

128 Exchanging Messages 5. Select a download size from the Download attachments smaller than list box. 6. Tap Finish . To store attachments on a storage card 1. Tap Start > Messaging . 2. Tap Menu > Options > Storage tab. 3. Select the When available, use this storage card to store attachme...

Chapter 8 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing with the Exchange Server 8.2 Working With Company E-mails 8.3 Managing Meeting Requests 8.4 Finding Contacts in the Company Directory

130 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet wirelessly and synchronize with your company’s Exchange ...

Working With Company E-mails and Meeting Appointments 131 Tip To change Exchange Server settings, open ActiveSync then tap Menu > Configure Server . Start synchronization Before you start synchronizing with the Exchange Server, make sure your device has been set up with a data connection to the I...

132 Working With Company E-mails and Meeting Appointments You need to perform a full synchronization between your device and the Exchange Server first before Direct Push can be enabled. Requirement The Direct Push feature works for your device only if your company is using Microsoft Exchange Server ...

Working With Company E-mails and Meeting Appointments 133 Instant download through Fetch Mail The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save...

134 Working With Company E-mails and Meeting Appointments 5. From the Look in list, choose whether to search from your inbox or outbox only or to search all folders. 6. Tap Search . Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail ...

Working With Company E-mails and Meeting Appointments 135 Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply message when you’re not available. To send out-of-office a...

136 Working With Company E-mails and Meeting Appointments 3. Choose whether or not to edit your response e-mail before sending then tap OK : 4. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1...

Working With Company E-mails and Meeting Appointments 137 8.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily...

138 Working With Company E-mails and Meeting Appointments 3. Enter a partial or full contact name and tap Search . In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact then tapping Menu > Save to ...

Chapter 9 Working With Documents and Files 9.1 Microsoft® Office Mobile 9.2 Adobe® Reader® LE 9.3 Copying and Managing Files 9.4 ZIP 9.5 Backing Up Data

140 Working With Documents and Files 9.1 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Word Mobile lets you create and edit documents and templates in Word Mobile and save them as *.doc , *.rtf , *.txt , and *.dot files. • Microsoft® Of...

Working With Documents and Files 141 9.2 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE • Tap Start > Programs > Ad...

142 Working With Documents and Files 9.3 Copying and Managing Files You can copy files between your device and PC, or copy files to a storage card that is inserted on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Ce...

Working With Documents and Files 143 To copy files to a storage card 1. Make sure the storage card is properly inserted into your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, and tap Copy . 4. Tap the Down ar...

144 Working With Documents and Files 3. Tap Menu > Action > Extract . 4. Choose a folder in which files will be extracted to, then tap Extract . To create a zip archive 1. Tap File > New Archive . 2. On the Save As screen, enter a zip file name and choose a folder in which to save the zip f...

Working With Documents and Files 145 To open Sprite Backup • On your device, tap Start > Programs > Sprite Backup . Sprite Backup operates in two different modes: Basic mode and Advanced mode . Basic mode Advanced mode To back up data in Basic mode Basic mode is the default mode, and allows yo...

146 Working With Documents and Files To back up data in Advanced mode Advanced mode is designed for users with more advanced backup requirements. 1. Tap Options > Switch to Advanced Mode . 2. In the Backup tab, you will see a tree view of the data and files on your device. Tap the ‘+’ symbol at t...

Chapter 10 Getting Connected 10.1 Comm Manager 10.2 Connection Setup 10.3 Ways of Connecting to the Internet 10.4 Wi-Fi 10.5 GPRS/3G 10.6 Dial-up 10.7 Starting a Data Connection 10.8 Internet Explorer® Mobile 10.9 Windows Live™ 10.10 Using Your Device as a Modem (Internet Sharing) 10.11 Bluetooth

148 Getting Connected 10.1 Comm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager • Tap Start > Settings > Connections tab > Comm Manager . • Tap Start > Programs > Comm M...

Getting Connected 149 10.2 Connection Setup Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network operator, then Connection Setup does all t...

150 Getting Connected 4. Tap Yes . Connection Setup configures the data connection settings. 5. After the Connection Setup completes the configuration, tap Restart . 10.3 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate netwo...

Getting Connected 151 Connect to wireless networks After Wi-Fi is turned on in Comm Manager, your device scans for available wireless networks in your area. To connect to a wireless network 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desir...

152 Getting Connected • Title bar . When you enable Wi-Fi on your device, the Wi-Fi ON icon appears on the title bar.After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while yo...

Getting Connected 153 To save battery power while connected to a wireless network Using Wi-Fi quickly consumes battery power. Turn off Wi-Fi when not in use. You can also enable power saving settings. 1. Tap Start > Settings > Connections tab > Wireless LAN . 2. On the Power Mode tab, move ...

154 Getting Connected 4. In the Select a modem list, select Cellular Line (GPRS, 3G) , then tap Next . 5. Enter the Access point name, then tap Next . 6. Enter the user name and password, only if required. 7. Tap Finish . Notes • To view help information for any screen, tap the help icon ( ). • To m...

Getting Connected 155 6. Enter your user name, password, and any other information required by your ISP. 7. Tap Finish . 10.7 Starting a Data Connection After setting up a data connection such as GPRS or ISP dial-up on your device, you can now connect your device to the Internet. The connection is s...

156 Getting Connected To view a Web page using finger scrolling and panning • Slide your finger upward to scroll down the Web page, or slide your finger downward to scroll up the Web page. • To pan downward, touch and hold on the touch screen then drag your finger upward. To pan upward, touch and ho...

Getting Connected 157 Tap Menu > Tools and choose to send the current Web page link, view the page’s properties, or set preferences. To save an image from a Web page to your device, tap and hold the image then tap Save Image . Note: For more information about using Internet Explorer® Mobile, plea...

158 Getting Connected Set up Windows Live™ The first time you use Windows Live™, sign in by using your Windows Live ID, which is your Windows Live Mail or Hotmail address, and password. To set up Windows Live for the first time 1. Tap Start > Programs > Windows Live . 2. Tap Sign in to Windows...

Getting Connected 159 The Windows Live™ interface On the main interface of Windows Live™, you will see a search bar, navigation bar, and an area where you can customize to show your picture. 1 Live Search Bar 2 Tap the Left or Right arrow to switch between Windows Live Messenger, Live Mail, and Sync...

160 Getting Connected Windows Live Messenger With this mobile version of Windows Live Messenger , you enjoy many of the same cool features that you get from the desktop version, which include the following: • Instant messaging via text and voice • Multiple conversations • Add emoticons • Contact lis...

Getting Connected 161 To start and end conversations 1. In the contact list, select a contact then tap Send IM to open a message screen. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the list of emotic...

162 Getting Connected 10.10 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your PC or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth. Notes • Make sure your device has a ...

Getting Connected 163 To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and s...

164 Getting Connected Note If the Bluetooth adapter or dongle on your computer was installed using a third-party provided driver, open the Bluetooth software that came with the Bluetooth adapter/dongle to connect your computer and device via Bluetooth. Refer to the Bluetooth adapter/dongle documenta...

Getting Connected 165 To turn Bluetooth on and make your device visible 1. On your device, tap Start > Settings > Connections tab > Bluetooth > Mode tab. 2. Select the Turn on Bluetooth and Make this device visible to other devices check boxes. 3. Tap OK . Bluetooth partnerships A Blueto...

166 Getting Connected To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish ...

Getting Connected 167 4. Tap the name of the Bluetooth headset, then tap Next . 5. Enter the passcode of the Bluetooth headset, then tap Next . 6. Make sure the Hands Free check box is selected. If you have a Bluetooth stereo headset, also make sure Wireless Stereo is selected. 7. Tap Finish . While...

168 Getting Connected If your computer has Windows Vista® or Windows XP SP2 and your computer’s Bluetooth adapter is supported by your Windows version, do the following steps: a. On your computer, open Bluetooth Devices from the Control Panel then click the Options tab on the Bluetooth Devices windo...

Getting Connected 169 • For your device to receive Bluetooth beams, tap Start > Settings > Connections tab > Beam and make sure the Receive all incoming beams check box is selected. Bluetooth Explorer and Bluetooth file sharing Bluetooth Explorer searches for other Bluetooth devices that ha...

170 Getting Connected 3. Select one or more files, then tap Menu > Edit and choose to cut or copy the files. 4. Tap Up twice. 5. Navigate to the folder where you want to paste the files on your device, then tap Menu > Edit > Paste . Print files via Bluetooth Connect your device to a Bluetoo...

Getting Connected 171 To print a JPEG file 1. Do one of the following: • In Pictures & Videos, select the JPEG file and then tap Menu > Print via Bluetooth . • In File Explorer, tap and hold the JPEG file and then on the menu, tap Print via Bluetooth . 2. Follow steps 3 to 5 in the “To print ...

Chapter 11 Using GPS 11.1 Guidelines and Preparation for Using GPS 11.2 Downloading Satellite Data via QuickGPS 11.3 Using TomTom NAVIGATOR 11.4 GPS Controls

174 Using GPS 11.1 Guidelines and Preparation for Using GPS • Do not operate the GPS system while driving. The plotted GPS route is only for driving reference. It should not interfere with actual driving behavior. • Please use the GPS system cautiously. Users shall be liable for any damages resultin...

176 Using GPS 11.2 Downloading Satellite Data via QuickGPS Before you start to use your device for GPS navigation, open the QuickGPS program first to download ephemeris data (current satellite position and timing information) onto your device. This data is needed to determine the GPS position of you...

Using GPS 177 Download options To configure download times, tap Menu > Options and choose from the available options: • Remind me when data expires . Enables your device to display a reminder message when the validity of the ephemeris data has expired.When you see the reminder message, tap Menu t...

178 Using GPS 11.3 Using TomTom NAVIGATOR TomTom NAVIGATOR is a GPS navigation software that provides clear routing directions and vocal instructions to guide you in your journey, based on the destination address you specified, a contact you selected, a point of interest, etc. TomTom NAVIGATOR gives...

Using GPS 179 If it takes longer than 5 minutes, make sure that you are in an open place without tall buildings or trees around you. In the future, your position will be found much faster, normally within a few seconds. Tip For your GPS receiver to determine your current position faster, use QuickGP...

180 Using GPS Main Menu Tap anywhere on the map in the Driving View screen to open the Main Menu . The Main Menu has three screens of icons. Tap the Next icon ( ) to switch between the menu screens. • Navigate to . Lets you select a destination. • Find alternative . Calculates an alternative route i...

Using GPS 181 Select a destination When you tap Navigate to on the Main Menu, you are given several options to set your destination. Tap the Next icon ( ) to browse through the various types of destinations.Some of the common destinations you may want to go to include the following: • Home . Your Ho...

182 Using GPS After you have set your destination, NAVIGATOR asks you whether you need to arrive at a particular time. After you tap YES and enter an arrival time, NAVIGATOR shows you whether you will arrive on time or not.NAVIGATOR then calculates the route and displays the Route Summary:Tap Done ....

184 Using GPS POI locations POI categories To add a point of interest 1. Tap the Driving View screen to open the Main Menu. 2. Tap Change preferences > Manage POIs . Before you can add a POI, you have to create a category first. You can only add your POIs to a POI category you have created yourse...

Using GPS 185 Advanced planning It is recommended to plan in advance before you start on the journey. You can use the Advanced planning function to find out which is the fastest or shortest route between your starting point and destination. To plan a route in advance 1. Tap the Driving View screen t...

186 Using GPS 6 2 1 5 3 4 7 1 This Scale Bar shows the distance range shown on the map based on the current zoom scale. 2 This is your current position on the map. Tap another location to move to a different part of the map. 3 Tap to centre the map on your current position. 4 This is the Zoom Bar . ...

Chapter 12 Experiencing Multimedia 12.1 Camera 12.2 Camera Album 12.3 Pictures & Videos 12.4 Windows Media® Player Mobile 12.5 Streaming Media 12.6 Audio Manager 12.7 Using Audio Booster 12.8 Using FM Radio

12.1 Camera Taking photos and recording video clips along with audio are easy with your device’s two built-in cameras: Main camera: Rear 2 megapixel CMOS camera for capturing high resolution pictures and video clips with audio 2nd camera: Front camera for video calls and taking self-portrait shots T...

You can select from the following capture modes: Icon Capture Mode Photo : Captures standard still images. Video : Captures video clips, with or without accompanying audio. MMS Video : Captures video clips suitable for sending with MMS messages. Contacts Picture : Captures a still image and gives yo...

192 Experiencing Multimedia Camera controls • Press CAMERA or ENTER to take a photo or contacts picture. • Press CAMERA or ENTER to start recording video; press it again to stop recording. • Press CAMERA or ENTER each time when taking photos for a picture theme or panorama. • To take consecutive sho...

Experiencing Multimedia 193 In Video and MMS Video modes, this shows the remaining duration that can be recorded. While recording video, this shows the recorded duration. 3 Zoom control . Tapping / on the screen allows you to zoom in or zoom out. Note This control only appears when zooming is suppor...

194 Experiencing Multimedia Quick Settings Panel The Quick Settings Panel provides a quick way of adjusting the most common camera settings. Tap the screen to open the Quick Settings Panel. Keep tapping a button on the panel, for instance, Resolution , to cycle through the available settings. Note T...

Experiencing Multimedia 195 4 Self-timer . Tap to set the self-timer to 2 seconds , 10 seconds , or Off when in the Photo or Contacts Picture mode. When you press the CAMERA or ENTER button to capture a still image, it starts to count down, and then captures a still image after the assigned time. 5 ...

196 Experiencing Multimedia Capture mode Capture size setting Zoom range Photo 3M (2048 x 1536) No zooming available 2M (1600 x 1200) No zooming available 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.0x Video CIF (352 x 288) ...

Experiencing Multimedia 197 The Review screen After taking a still image or recording a video clip, you can view, send, or delete the image or video clip on the Review screen . You can also tap the following icons at the bottom of the Review screen: Icon Function Back Return to the live Camera scree...

198 Experiencing Multimedia Camera settings Tap the Menu icon ( ) to open the Camera Settings screen. The Camera Settings screen allows you to configure capture and camera settings.The Camera settings consist of two tabs: Capture Settings and Advanced . Use the Capture Settings tab to adjust options...

Experiencing Multimedia 199 • Quality . Select the JPEG image quality level for all captured still images. Choose from Basic , Normal , Fine , and Super Fine . • Metering Mode . Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before...

200 Experiencing Multimedia • Keep Backlight . Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Review Duration . Set a time length for displaying the captured image/video on the Review screen. Select No Limit if you do not want to impose ...

Experiencing Multimedia 201 • Image Properties . This option lets you adjust the camera display properties, such as Contrast , Saturation , Hue , and Sharpness . 1 Tap a property to adjust. 2 Tap the left/right arrow icon or press NAVIGATION left/right (in landscape orientation) to increase/decrease...

202 Experiencing Multimedia 12.2 Camera Album Use the Camera Album to view images and videos that you captured using the Camera program. Camera Album offers a host of features that let you rotate images, view your images as a slide show, use images as contact pictures, and more. Note Only files supp...

Experiencing Multimedia 203 To view an image On the main Camera Album screen, touch the thumbnail of the image you want to view. While viewing the image, you can zoom in or rotate the image. To learn how to zoom and rotate the image, see the succeeding procedures. While viewing an image, touch the s...

204 Experiencing Multimedia To rotate the image 1. View the image you want to rotate. 2. With your finger, make a semicircle motion on the screen. Slide your finger counter-clockwise to rotate the image 90 degrees counter- clockwise. Slide your finger clockwise to rotate the image 90 degrees clockwi...

Experiencing Multimedia 205 To view the images as a slide show On the Camera Album screen, touch Slide Show . While viewing the slide show, touch the screen to show playback controls. Touch to go back to the previous image. Touch to open the slide show options where you can set the transition effect...

206 Experiencing Multimedia 12.3 Pictures & Videos Pictures & Videos allows you to manage the following types of media files on your device: File Type File Extensions Image *.bmp, *.jpg, *.gif, *.png GIF animation *.gif Video *.avi, *.wmv, *.mp4, *.3gp, *.3g2 Audio *.wma To open Pictures &am...

Experiencing Multimedia 207 To play GIF animation files 1. Select a GIF animation file (marked with a icon) and tap View . 2. The GIF Animation program then opens and plays the animation. To play videos 1. By default, the contents of the My Pictures folder will be shown. 2. To find the video clips t...

208 Experiencing Multimedia • To crop a picture, tap Menu > Crop . Next, tap and drag to select the area to crop. Tap inside the box to crop, or tap outside the box to cancel cropping. • To adjust the brightness and contrast levels of a picture, tap Menu > Auto Correct . Note To undo an edit, ...

Experiencing Multimedia 209 About the controls The following are available controls on the Windows Media® Player Mobile. Play/Pause Full screen Visit WindowsMedia.com Tap and drag to jump to any part of the video or audio Skip to the beginning of the current file or to the previous file Skip to the ...

210 Experiencing Multimedia Synchronize video and audio files Use the latest version of Windows Media® Player on your PC to synchronize digital media files from your PC to your device. This ensures that protected files and album art (for skins) are copied to your device correctly. To synchronize con...

Experiencing Multimedia 211 Playlists and Library List Sync List Content List 4. Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your PC to synchronize media files to your device. • Audio files copy faster if Windows Media®...

212 Experiencing Multimedia To play video and audio files on your device 1. Select a category (for example, My Music or My Playlists). 2. Tap and hold the item that you want to play (such as a song, album, or artist name), then tap Play . Tips • To play a media file that is stored on your device but...

Experiencing Multimedia 213 12.5 Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the Web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio.The Streaming Media program allows you to play 3GP and M...

214 Experiencing Multimedia To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1. Ta...

Experiencing Multimedia 215 12.6 Audio Manager Audio Manager is a music browser and player in one. It gives you access to all the music files on your device, and allows you to easily browse for the music that you want to play by organizing music into categories such as title, artist, album, etc. You...

216 Experiencing Multimedia When you tap a category on the Library’s Main screen, you will see more submenus which may have deeper levels of menus. For example, when you tap Artists , another level of submenus will be listed showing artist names. When you tap an artist name, more submenus showing al...

Experiencing Multimedia 217 Playlists The Playlists screen shows the current playlists that are found on the device memory and memory card.There are two types of playlists that will be shown on the Playlist screen: • Windows Media® Player playlists . These are playlists that are in Windows Media® Pl...

218 Experiencing Multimedia To play back a playlist 1. On the Playlists screen, tap to select a playlist. 2. Tap the first song in the selected playlist. Music Player automatically opens and starts playing the first song. After each song, the next one in the playlist will be played. Note The content...

Experiencing Multimedia 219 12.7 Using Audio Booster Audio Booster enhances your music experience by providing you with controls for adjusting sound settings while you are listening to music. It adds 3D sound, treble and bass effects, and provides controls for adjusting them. It even has an equalize...

220 Experiencing Multimedia This control Does this 6 Menu • Tap Menu > Cancel to exit Audio Booster without applying the modified settings: • Tap Menu > Reset to change back to the default settings. Equalizer The Equalizer optimizes sound for a better listening experience. It provides preset m...

Experiencing Multimedia 221 To apply a preset 1. Select the Equalizer check box to enable the equalizer. 2. Tap the list box then select a desired preset. 12.8 Using FM Radio FM Radio allows you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as a...

222 Experiencing Multimedia FM Radio controls 12 3 4 8 11 7 6 9 5 10 Tip Tap Menu to choose more options for FM Radio, such as Scan & Save to perform a rescan of the FM band for available FM stations and save them as presets, and more. This control Does this 1 Turns off the FM radio. 2 See “Radi...

Experiencing Multimedia 223 This control Does this 10 Turns the sound on or off. 11 Adjusts the volume. Tap to increase the volume. Tap to decrease the volume. The volume level is displayed below the icon. Radio Display 1 Shows the station name when the RDS (Radio Data System) or RDBS (Radio Data Br...

224 Experiencing Multimedia Saving presets Presets are favorite FM stations that you can save for easy access. You can save up to six FM stations to the preset buttons on the main FM Radio screen, or save up to 20 presets on the Presets screen. To save FM stations to the preset buttons 1. Tune to th...

Experiencing Multimedia 225 FM Radio Main Menu Tap Menu on the FM Radio screen to access options for the FM Radio program. Scan & Save Automatically scan radio stations that can be picked up by the device and save them as presets. Existing presets will be cleared and replaced with the newly scan...

Chapter 13 Managing Your Device 13.1 Adding and Removing Programs 13.2 Using Task Manager 13.3 Resetting Your Device 13.4 Managing Memory 13.5 Windows Update 13.6 Battery Saving Tips

228 Managing Your Device 13.1 Adding and Removing Programs Before you purchase additional programs for your device, make sure that they are compatible with your device. To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a...

Managing Your Device 229 To configure the Exit ( ) button You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but keep the program running. 1. On the Task Manager screen, tap the Button tab. 2. Select the Enable t...

230 Managing Your Device To set the sorting preference for running programs in the Quick Menu 1. On the Task Manager screen, tap the Advanced tab. 2. Choose whether to sort according to Program name or Memory usage . The list will be sorted in ascending order. 13.3 Resetting Your Device Soft reset O...

Managing Your Device 231 Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, performing a hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted fil...

232 Managing Your Device 13.4 Managing Memory To see how much memory is available for use, tap Start > Settings > System tab > Memory . On the Main tab, the amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the avai...

Managing Your Device 233 13.5 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if they are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on...

234 Managing Your Device 13.6 Battery Saving Tips How long your battery power lasts depends on battery type and how you use your device. Try the following to help preserve battery life: • When the device is not in use, press POWER to switch off the display. • Tap Start > Settings > System tab ...

Chapter 14 Using Other Applications 14.1 Voice Speed Dial 14.2 Java 14.3 Spb GPRS Monitor

236 Using Other Applications 14.1 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. Create a voice tag for a phone number 1. Tap Start > Contacts to open the Contacts list. 2. Do one of the following: • Tap and hold the de...

Using Other Applications 237 5. When you create a voice tag for the item, you can do one of the following: • Tap the Record button to rebuild the voice tag. • Tap the Play button to play the voice tag. • Tap the Delete button to delete the voice tag. Create a voice tag for a program 1. Tap Start >...

238 Using Other Applications 14.2 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device suppor...

Using Other Applications 239 To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes . • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite then tap Launch . To stop running a MI...

240 Using Other Applications 14.3 Spb GPRS Monitor Using Spb GPRS Monitor , you can monitor how much data you have sent and received on your device, and check the network usage costs by taking into account your service plan details. You can also view connection cost and traffic charts, generate repo...

Using Other Applications 241 The GPRS Monitor icon and pop-up window Another way of displaying status information visually is by enabling the GPRS Monitor icon to be shown on the title bar. This icon shows the GPRS/ dial-up connection speed, data traffic, and battery status. To show the GPRS Monitor...

242 Using Other Applications To enter your service plan details Service plan details, or tariffs, determine the price that you pay for your data transfers. The tariff may either be flat rate or time-based, depending on whether you’re using GPRS or a phone dial-up connection for data transfers.Contac...

244 Appendix A.1 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of POLA100 . To ensure continued reliable and safe operation of your device, use only the accessories listed below with your POLA100 . The Battery Pac...

246 Appendix This equipment may be operated in: AT BE BG CH CY CZ DE DK EE ES FI FR GB GR HU IE IT IS LI LT LU LV MT NL NO PL PT RO SE SI SK TR Safety precautions for RF exposure • Use only original manufacturer-approved accessories, or accessories that do not contain any metal. • Use of non-origina...

Appendix 247 it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.Your device has an internal antenna. Use only the supplied integral antenna. Use of unauthorized or modified antennas may impair call quality and damage the pho...

248 Appendix Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device...

Appendix 249 RoHS Compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments. A.2 Specifications Sy...

250 Appendix HSDPA / UMTS / GSM / GPRS / EDGE Module Functionality HSDPA/UMTS: 2100MHz for Europe, 850/1900MHz for USA HSDPA: Up to 384kbps for upload and 3.6Mbps for download UMTS: Up to 384kbps for upload and download GSM/GPRS/EDGE: Quad-band (850, 900, 1800, and 1900) Internal Antenna Yes Physica...

Index Symbols 3D sound 219 3G 153 A A2DP 166 ActiveSync - set up 91 - synchronize 92, 131 Add and remove programs 228 Adobe Reader LE 47, 141 Alarm 82 Answer/end a call 69 Appointment search 62 Attachment - add to e-mail 123 - download 125 Audio Booster 47, 219 Audio Manager 47, 215 B Backlight 80, ...