HTC 3100 - Manual

5 Level requirement laid down in NF EN 50332-1:2000 standard as required by French Article L. 5232-1. SAFETY IN AIRCRAFT Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane ...

6 NONIONIZING RADIATION This product should be operated in the suggested normal condition only to ensure the radiative performance and safety from interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of...

7 instructions, and should use a mounting accessory recommended by the manufacturer. • Avoid unstable mounting Do not place the product on an unstable base.

8 Contents Chapter 1 Getting Started 11 1.1 Getting to Know your Phone and its Accessories .. 121.2 Inserting the SIM Card ............................................... 181.3 Installing the Micro SD Card ..................................... 191.4 The Home Screen .....................................

Chapter 1 Getting Started 1.1 Getting to Know your Phone and its Accessories 1.2 Inserting the SIM Card 1.3 Installing the Micro SD Card 1.4 The Home Screen 1.5 Status Indicators and Program Icons 1.6 Using the Start Menu 1.7 Using the Quick List 1.8 Entering Information 1.9 Battery Information

12 Getting started 1.1 Getting to Know your Phone and its Accessories 1 2 3 4 5 67 9 8 10 11 12 13

Getting started 13 Item Function 1. Voice Notes/ Voice Tag When the flip cover is opened, press and hold the button to start the Voice Notes recorder or press and hold the button to launch the Voice Tag feature. 2. VOLUME Press to increase or decrease the earpiece volume during a call. 3. Camera Len...

Getting started 15 Item Function 14. Earpiece Listen to a phone call. 15. Display Screen16. Left SOFT KEY Press to perform the command shown in the label above the button. 17. TALK Press to dial a phone number, answer a call, switch to another call or put a call on hold. Hold to activate/deactivate ...

16 Getting started LED indicator lights Various colors that might display in the two LED Indicators are summarized here. Upper LED Status Solid green Battery is fully charged. Blank Battery case is empty. Solid amber Battery is charging or the phone is using ActiveSync to synchronize with a PC. Flas...

Getting started 17 Accessories The following accessories are provided with the device: 1 2 3 Accessory Function 1. AC Charger Recharge the device battery. 2. USB cable Connect your device to a PC and synchronize data. 3. Stereo headset Provide a volume control jog dial and a Send/End button. You can...

18 Getting started 1.2 Inserting the SIM Card Your SIM (Subscriber Identity Module) card is given to you by your wireless service provider and contains your basic subscriber information, such as your phone number and your address book. Before you begin, ensure that the phone is turned off. 1. Open t...

Getting started 19 1.3 Installing the Micro SD Card 1. Open the battery cover. 2. Remove the SIM card if you have installed it. 3. Lift up the Micro SD card metal socket, and then insert the Micro SD card into the slot. Insert the Micro SD card. Lift up the socket. 4. Push the metal socket down. 5. ...

Getting started 21 1.5 Status Indicators and Program Icons The following table lists common status indicators and their meanings. GPRS available New email or text message (SMS, Short Message Service) GPRS connected New instant message Voice call in progress Multipress text input mode, lowercase Data...

Getting started 23 Messaging Lets you send and receive emails and text messages. MIDlet Manager Lets you download and install Java-based applications, such as games and tools, on your phone. Pictures & Videos Collects, organizes and sorts picture and video files in the My Pictures folder on your...

24 Getting started 1.6 Using the Start Menu The Start menu is located at the bottom-left corner of the Home screen and displays various program icons that are spread across one or more screens. To see the available programs in the Start menu • On the Home screen, click Start . • To see more programs...

Getting started 25 1.8 Entering Information You can enter text and numbers by using the keypad. The phone supports three input modes for entering text and numbers: Multipress , T9 and Numeric . Multipress and T9 modes are used for entering text; Numeric mode is used for entering numbers.When you sel...

26 Getting started To change the Multipress time out You can change the length of time to pause between key presses on the same numeric key. 1. On the Home screen, click Start > Settings > Accessibility . 2. In Multipress time out , select the length of the pause between key presses. Use T9 mo...

Getting started 27 To enter numbers in text boxes 1. Press and hold the key to change to Numeric mode. 2. On the keypad, enter the number or numbers you want. 3. Change back to Multipress or T9 input mode by pressing and holding the key, and then fi nish entering your text. More text entry tasks In b...

28 Getting started 1.9 Battery Information Battery performance depends on many factors, including your wireless service provider’s network configuration, signal strength, the temperature of the environment in which you operate your phone, the features and/or settings you select and use, items attach...

Chapter 2 Using Phone Features 2.1 Using the Phone 2.2 Making a Call 2.3 Receiving a Call 2.4 In-call Options 2.5 Additional Dialing Information

30 Using Phone Features 2.1 Using the Phone You can use your phone to make, receive, keep track of calls and send text messages (SMS, Short Message Service) and MMS (Multimedia Messaging Service) messages. You can also dial a phone number directly from Contacts and easily copy SIM contacts to Contac...

Using Phone Features 31 To set a ring tone for incoming calls 1. On the Home screen, click Start > Settings > Sounds . 2. In the Ring tone list, select a ring tone. 3. Click Done . If you select Vibrate , the sound is muted and the phone will vibrate when you receive a call. The vibrate icon (...

32 Using Phone Features Tips • While entering the phone number, press the BACK button if you need to backspace. • You will notice that when you press a numeric key on the keypad, a list of names and numbers is displayed as your phone searches Contacts, Call History, Speed Dial and your SIM card to f...

Using Phone Features 33 Make a call from Call History 1. On the Home screen, click Start > Call History . 2. Select a name or number and press TALK ( ). Tip On the Call History screen, press ENTER to view details, such as the call type (dialed, missed or received call), call duration, date and ti...

34 Using Phone Features 2.3 Receiving a Call When you receive a phone call, you have the option to answer it or ignore it. To answer an incoming call • To answer the call, click Answer , or press TALK ( ) or any numeric key. • Open the fl ip cover. Tip The way to answer an incoming call depends on th...

Using Phone Features 35 To switch between calls • To switch between two calls, click Swap . To set up a conference call 1. Either put a call on hold and dial a second number or answer a second incoming call during a call. 2. Click Menu > Conference . Notes • If the conference connection is succes...

36 Using Phone Features 2.5 Additional Dialing Information Make an emergency call • Enter the appropriate emergency number for your region and press TALK ( ). Tip Additional emergency numbers may be included in your SIM card. Contact your service provider for details. Make an international call 1. P...

Using Phone Features 37 Insert a longer pause in a dialing sequence Some phone numbers may require a longer pause than the default pause in the dialing sequence. In these cases, you can pause as long as you want and manually continue the dialing sequence. 1. On the Home screen, click Start > Cont...

Chapter 3 Synchronizing Information and Setting Up E-mail Security 3.1 About ActiveSync 3.2 Setting Up ActiveSync 3.3 Synchronizing Information 3.4 Synchronizing via Bluetooth 3.5 Synchronizing Music and Video 3.6 Setting Up Email Security

Synchronizing Information and Setting Up E-mail Security 39 3.1 About ActiveSync ActiveSync synchronizes information on your phone with information on your PC. ActiveSync can also synchronize over a wireless or cellular network with Exchange Server if your company or service provider is running Exch...

40 Synchronizing Information and Setting Up E-mail Security 3. Do not select the Synchronize directly with a server running Microsoft Exchange Server check box if you will synchronize Microsoft Exchange Server Microsoft Exchange Server your device with a computer. Just click Next , then skip to step...

Synchronizing Information and Setting Up E-mail Security 41 • To check the domain name, click Start > Settings > Control Panel , then double-click System . • In the System Properties dialog box, click the Computer Name tab. You will then see the domain name. 6. On your device, you also need to...

42 Synchronizing Information and Setting Up E-mail Security 3.3 Synchronizing Information When you connect your phone to your PC, ActiveSync will immediately synchronize. While the phone is connected, ActiveSync synchronizes every time you make a change on either the PC or the phone. To manually sta...

Synchronizing Information and Setting Up E-mail Security 43 Location New state PC1 All Outlook contacts and calendar appointments that were on PC2 are now also on PC1. PC2 All Outlook contacts and calendar appointments that were on PC1 are now also on PC2. Phone All Outlook contacts and calendar app...

44 Synchronizing Information and Setting Up E-mail Security Synchronize Outlook information with Exchange Server You can set up synchronization with Exchange Server on your phone, if it is available to you through your company or wireless service provider. However, you should first ask your administ...

Synchronizing Information and Setting Up E-mail Security 45 Schedule synchronization with Exchange Server You can schedule information to be synchronized automatically between your phone and Exchange Server, or schedule synchronization at regular time intervals. Choose between these two methods, dep...

46 Synchronizing Information and Setting Up E-mail Security To schedule synchronization at regular time intervals You can set how often to synchronize during Peak times (which usually refer to your working hours) when email volume is high, as well as Off-times when email volume is low. 1. In ActiveS...

Synchronizing Information and Setting Up E-mail Security 47 3.5 Synchronizing Music and Video If you want to take your music or other digital media with you, ActiveSync works with Windows Media Player to synchronize music ActiveSync works with Windows Media Player ActiveSync works with Windows Media...

48 Synchronizing Information and Setting Up E-mail Security 3.6 Setting Up Email Security Windows Mobile on your phone protects your Outlook emails through Secure/Multipurpose Internet Mail Extension (S/MIME), which allows you to digitally sign your messages as well as encrypt them.Using authorizati...

Synchronizing Information and Setting Up E-mail Security 49 4. Do one or both of the following: • To sign all your outgoing email messages so that recipients can be certain that the messages were sent by you and have not been altered in any way, select Sign messages . • To encrypt all your outgoing ...

Chapter 4 Managing your Phone 4.1 Personalizing your Phone 4.2 Adding and Removing Programs 4.3 Using Task Manager and Managing Memory 4.4 Managing and Backing Up Files 4.5 Protecting your Phone4.6 Restarting your Phone 4.7 Resetting your Phone

Managing your Phone 51 4.1 Personalizing your Phone Set up the Answer Mode You can answer an incoming call by pressing TALK ( ) or any numeric key on the keypad, or simply by opening the flip cover. 1. On the Home screen, click Start > Settings > Phone . 2. Click Answer Mode . 3. Select Open t...

52 Managing your Phone Set language , locale and other regional options Your phone should already be set up with the regional settings that are appropriate for your locale. To change regional settings You can specify the language, locale, date and time style, as well as number and currency formattin...

Managing your Phone 53 To change the current profi le 1. On the Home screen, click Profi le [Type] . Example: Profi le Normal . 2. Select the desired profi le and click Done . Tip To quickly change the profile, press and hold the HOME button to display the Quick List and click a profile. To edit a profi ...

54 Managing your Phone To copy a sound to your phone After a sound file is located on your phone, you can use it for a ring tone, notification or reminder. Sound files in either .wav, .mid or .wma formats can be used. 1. Connect the phone to your PC using a USB connection. 2. On your PC, copy the de...

Managing your Phone 55 • In Telephone number , enter a number where you can be reached. • In E-mail address , enter your email address. • In Notes , enter any other information you want to include. 3. Click Done . Set performance and maintenance options To change accessibility settings 1. On the Hom...

56 Managing your Phone • In Display time out , select the time limit for the phone to be idle before the screen turns off. • In Light Sensor Enable , turn it on to see the buttons on the keypad more easily in the dark. 3. Click Done . Tip Main battery indicates the amount of battery life remaining. ...

Managing your Phone 57 • Wallpaper image. Select a picture as the wallpaper. • Status bar. Select On or Off to show or hide the status bar on the external screen. • Date and time. Select On or Off to show or hide the current date and time on the external screen. • Button lock after idle for. Select ...

58 Managing your Phone To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe fi le, a *.zip fi le, a Setup.exe fi le or several versions of fi les for different device types and processors. Be sure to select a pro...

Managing your Phone 59 4.3 Using Task Manager and Managing Memory To see how much memory is available 1. On the Home screen, click Start > Settings > About . 2. Scroll down to Available Memory . Use Task Manager Task Manager allows you to view all the programs currently running on your phone i...

60 Managing your Phone Option Allows you to Stop All Stop all listed programs. Click OK to confirm that you want to end all currently running programs. You can view the free memory status at the bottom of the screen. Stop All But Selected Stop all running programs in the list except the one you sele...

Managing your Phone 61 4. Do one of the following: • To copy the file to your phone, right-click the file and click Copy . Right-click the desired folder on your phone and click Paste . • To copy the file to your PC, right-click the file and click Copy . Right-click the desired folder on your PC and...

62 Managing your Phone The File Explorer menu contains the following options: Option Allows you to Send Allows you send the selected file through one of the messaging features. Beam Allows you send the selected file through Bluetooth. Edit Open a menu where you can choose to cut, copy, paste, delete...

Managing your Phone 63 4.5 Protecting your Phone There are several levels of security on your phone. You can protect your phone from unauthorized use by requiring a type of password called a PIN (personal identification number) in order to make calls. Your first PIN will be given to you by your wire...

64 Managing your Phone To lock the keypad • On the Home screen, press and hold the HOME button and click Key lock . Once the keypad is locked, the left soft key label changes to Unlock . Note You can still receive calls and make emergency calls when the keypad is locked. To unlock the keypad • On th...

Managing your Phone 65 4.6 Restarting your Phone Occasionally, you may want to restart your phone, for example, when a program is not performing properly or the phone does not respond to any key presses. To restart the phone 1. Remove the battery. 2. Reinsert the battery and turn on your phone. Warn...

5.1 Connecting to the Internet 5.2 Using Internet Explorer Mobile 5.3 Using Wireless Modem 5.4 Using Comm Manager 5.5 Using Bluetooth Chapter 5 Getting Connected

Getting Connected 67 5.1 Connecting to the Internet Your phone’s powerful networking capabilities allow you to access the Internet or your corporate network at work through wireless and conventional connections. Specifically, you can configure your phone to establish a connection via Dial-up, GPRS, ...

68 Getting Connected To set up a GPRS connection 1. On the Home screen, click Start > Settings > Connections > GPRS . 2. Click Menu > Add . 3. In Description , enter a name for the connection. 4. In Connects to , select The Internet . 5. Enter the name of the GPRS Access point of your wi...

Getting Connected 69 To set up a dial-up connection for browsing the Internet 1. On the Home screen, click Start > Settings > Connections > Dial-up . 2. Click Menu > Add . 3. In Description , enter a name for the connection. 4. In Connects to , select The Internet . 5. Enter the appropri...

70 Getting Connected Advanced options From the Connections screen, you can access advanced options to specify the service provider, the number of redial attempts, the amount of idle time to wait before disconnecting, and so on. 1. On the Home screen, click Start > Settings > Connections . 2. C...

Getting Connected 71 5.2 Using Internet Explorer Mobile Internet Explorer Mobile is a full-featured Internet browser, optimized for use on your phone. To open Internet Explorer • On the Home screen, click Start > Internet Explorer . To go to a link 1. While on a Web page, scroll vertically or hor...

72 Getting Connected To show or hide pictures on Web pages • While on a Web page, click Menu > View > Show Pictures . A check mark next to Show Pictures indicates that pictures will be displayed on Web pages. To view a page in full-screen mode • While on a Web page, click Menu > View > F...

Getting Connected 73 To clear history , cookies or temporary fi les 1. While on a Web page, click Menu > Tools > Options . 2. Click Memory . 3. Select the type of memory to clear. 4. Click Clear , click Yes , and then click Done . To send a link via email 1. Go to the desired Web page. 2. Click...

74 Getting Connected 4. On your laptop, disable ActiveSync. Then plug in the USB cable adapter between the phone and the laptop. Note To disable ActiveSync on your computer in ActiveSync, click File > Connection Settings then clear Allow USB connections . 5. Click Menu > Start on your phone. 6...

Getting Connected 75 To set up the phone as a Bluetooth modem You can connect your phone to a computer through Bluetooth and use the phone as a modem for the computer.To learn how to set up the phone as a Bluetooth modem, see “Use the phone as a Bluetooth modem” in this chapter. Dial-up and connect ...

76 Getting Connected 13. The Connect dialog box then opens. Click Dial to dial up and connect to the Internet. Next time you want to dial up again from your computer, click Start > Settings > Control Panel , double-click Network Connections , then double-click the modem connection. Note To dia...

Getting Connected 77 5.4 Using Comm Manager Comm Manager acts like a central switcher that lets you enable or Comm Manager Comm Manager disable phone features as well as manage your data connections easily. To open Comm Manager: • Click Start > Comm Manager . 1. Click to toggle between enabling a...

78 Getting Connected 5.5 Using Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 8 meters without requiring a physical connection. You can even beam information to a device in a different roo...

Getting Connected 79 To turn Bluetooth on or off on your phone You can enable Bluetooth by clicking the On/Off switch in Comm Manager. You can also do the following: 1. On the Home screen, click Start > Settings > Connections > Bluetooth . 2. In Bluetooth , select On . 3. Click Done . 4. To...

80 Getting Connected To create a Bluetooth partnership 1. On the Home screen, click Start > Settings > Connection s > Bluetooth . 2. Click Menu > Devices . 3. Click Menu > New to search for a new device. Your phone searches for other Bluetooth-enabled devices and lists them. 4. Select...

Getting Connected 81 To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in discoverable mode. 2. Click Yes when prompted to establish a partnership with another device. 3. Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establis...

82 Getting Connected Connect a Bluetooth handsfree or stereo headset For handsfree phone conversations, you can use a Bluetooth handsfree headset such as a car kit with your phone.Your phone also supports A2DP (Advanced Audio Distribution Profile) which is for stereo audio over Bluetooth. This means...

Getting Connected 83 Note If the Bluetooth headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above. Select the headset and click Menu > Set as Hands-free or Set as Wireless Stereo . Beam information using Bluetooth You can beam information, such as contacts, calendar items...

84 Getting Connected • Create a Bluetooth partnership between your phone and your computer. For information about creating a partnership, see “Bluetooth partnerships”. • In the Options tab of Bluetooth Devices , select Show the Bluetooth icon in the notifi cation area . • To allow your computer to re...

Getting Connected 85 To beam information to a Bluetooth-enabled device such as another phone, create a Bluetooth partnership and then do steps 3 to 6 in the above procedure. Notes • If the computer or device you want to beam to cannot be detected by your phone, make sure that it is turned on, discov...

86 Getting Connected 6. Select Let me choose my own passkey , then enter a passkey (between 1 and 16 digits) that serves as an identifi cation number for establishing a secure connection between the phone and the computer. Click Next . 7. A confi rmation message then appears on your phone. Click Yes t...

Getting Connected 87 4. In the Add Hardware Wizard, click Next . 5. In the Select Bluetooth Device screen, select the phone name and then click OK . 6. In the Modems tab, select the Bluetooth modem listed and then click Properties . 7. Click the Advanced tab, then in the Extra initialization command...

6.1 Using Email and Text Messages 6.2 Using MMS Messages 6.3 Using Pocket MSN Messenger 6.4 Using Calendar6.5 Using Contacts 6.6 Using Tasks 6.7 Using Voice Notes Chapter 6 Exchanging Messages and Using Outlook

Exchanging Messages and Using Outlook 89 6.1 Using Email and Text Messages Messaging is where all of your email accounts and your text message account are located. You can send and receive Outlook email, Internet email through an Internet service provider (ISP) and text messages. You can also access...

90 Exchanging Messages and Using Outlook Every time you want to manually send or receive Outlook email on your phone, just connect your phone to your computer, LAN or over-the-air connection, then click Sync on the ActiveSync screen or click Menu > Send/Receive in Outlook on your phone. For detai...

Exchanging Messages and Using Outlook 91 Setting Description User name Enter the user name assigned to you by your ISP or network administrator. This is often the first part of your email address, which appears before the at sign (@). Password Choose a strong password. You have the option to save yo...

92 Exchanging Messages and Using Outlook Send and receive messages To compose and send an email or text message 1. Start > Messaging . 2. Select an email account or select Text Messages . Then, click Select . 3. Click New . 4. Enter the email address or phone number of one or more recipients, sep...

Exchanging Messages and Using Outlook 93 To exclude your email address when replying to all When you reply to all the recipients of an email, your own email address will also be added to the recipient list. You can customize ActiveSync so that your email address will be excluded from the recipient l...

94 Exchanging Messages and Using Outlook Download messages The manner in which you download messages depends on the type of account you have: • To send and receive email for an Outlook E-mail account, begin synchronization using ActiveSync. For more information, see “Set up Outlook E-mail” in this c...

Exchanging Messages and Using Outlook 95 Individually sign and encrypt a message Encrypting an Outlook email message protects the privacy of the message by converting it from plain, readable text into cipher (scrambled) text. Only the recipient who has the authorization key can decipher the message....

96 Exchanging Messages and Using Outlook 3. Click Menu > Check Certifi cate . 4. To view the details of the certifi cate in the message, click Menu > View Certifi cate . Note There can be several reasons why a digital signature is not valid. For example, the sender’s certificate may have expired,...

Exchanging Messages and Using Outlook 97 phone or PC. This synchronization of folders occurs whenever you connect to your email server, create new folders or rename/delete folders when connected. You can also set different download options for each folder.If you set up an account to send/receive mai...

98 Exchanging Messages and Using Outlook To access MMS message folders • Click Start > Messaging > MMS , then click Menu > Folders . MMS Message Folders Edit MMS settings When you send an MMS message, an SMS notification message will first be sent to the recipient, while your MMS message wi...

Exchanging Messages and Using Outlook 99 Edit to access Multimedia Messaging Service Center (MMSC) settings. 4. Check if your phone is preset with MMS server settings. If there are no preset settings, click Menu > New on the MMSC Settings screen and enter the following information, which you can ...

100 Exchanging Messages and Using Outlook Note If you add several MMS service providers to the MMSC Settings screen, you can choose one as your default MMS provider. Select the MMS provider’s name in the list, then click Menu > Set as Default . Create and send MMS messages You can compose MMS mes...

Exchanging Messages and Using Outlook 101 The following symbols act as shortcuts to some of the options on the MMS Message screen. • Press NAVIGATION left ( ) to go to the previous slide. • Press NAVIGATION right ( ) to go to the next slide. Composing an MMS Message To create an MMS message from a t...

102 Exchanging Messages and Using Outlook On the Select Media screen, you can view the thumbnails in list view, open an item to view it or delete an item by clicking Menu and choosing the appropriate option. You can even discard this photo or video clip by pressing BACK. To capture a new photo or vi...

Exchanging Messages and Using Outlook 103 The new audio clip is then added to your MMS message. To set options for an MMS message While composing an MMS message, you can set the following options for the message by clicking Menu . Option Allows you to Recipients Specify the phone number or email add...

104 Exchanging Messages and Using Outlook To view an MMS message You can view MMS messages in several ways. • Press ENTER to view and play the message on your phone. Click Pause or Menu > Stop to pause the playback of the message. • Click Menu > Object View to see a list of fi les included in t...

Exchanging Messages and Using Outlook 105 To start MSN Messenger 1. On the Home screen, click Start > Pocket MSN . 2. Click MSN Messenger . To sign in or out • On the main MSN Messenger screen, click Sign In . Enter the email address and password for your Passport or Hotmail account and click Sig...

106 Exchanging Messages and Using Outlook To change your display name 1. Click Menu > Options . 2. In My display name , enter the name you want to display to others in MSN Messenger. 3. Click Done . 6.4 Using Calendar Use Calendar to schedule appointments, including meetings and other events. You...

Exchanging Messages and Using Outlook 107 To view your schedule You can view your schedule in three different views: Month, Week and Agenda. 1. On the Home screen, click Start > Calendar . 2. Do one of the following: • Click Menu > Month View . • Click Menu > Week View . • Click Menu > G...

108 Exchanging Messages and Using Outlook Tips • If someone who isn’t in your list of contacts calls you or sends you a message, you can quickly create a contact from Call History or from the message by clicking Menu > Save to Contacts. • In the list of contact information, you’ll see where you c...

Exchanging Messages and Using Outlook 109 To send a text message to a contact 1. On the Home screen, click Start > Contacts . 2. Click the contact and click Menu > Send Text Message . 3. Compose your message and click Send . To fi nd a contact 1. On the Home screen, click Start > Contacts . ...

110 Exchanging Messages and Using Outlook 3. Do either of the following: • In Contacts, click Menu > Find Online . • In a new message, in the To box, click Menu > Add Recipient> Menu > Find Online . 4. Enter the contact name and click Find . Select one contact in the result list and clic...

Exchanging Messages and Using Outlook 111 Notes • Your phone must be set up with a data connection. • You can search on the following information as long as that information is included in your organization’s GAL: First name, Last name, Email name, Display name, Email address or Office location. To ...

112 Exchanging Messages and Using Outlook 6.6 Using Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are dis...

Exchanging Messages and Using Outlook 113 6.7 Using Voice Notes Use Voice Notes to create short voice recordings. Voice notes are included in the All Notes list and are named consecutively (Recording1, Recording2, and so on). To create a voice note 1. On the Home screen, click Start > Voice Notes...

7.1 Using Camera and Video Recorder(Optional) 7.2 Using Pictures & Videos 7.3 Using Windows Media Player 7.4 Using MIDlet Manager Chapter 7 Experiencing Multimedia

Experiencing Multimedia 115 7.1 Using Camera and Video Recorder (Optional) Taking photos and shooting video clips with audio are easy with your phone’s built-in camera. The built-in camera is available on the Cingular 3125. It is not available on the Cingular 3100. On the Cingular 3100, you can down...

116 Experiencing Multimedia The available capture modes are as follows: Capture mode Function Photo ( ) Captures standard still images. Video ( ) Captures video clips, with or without audio. MMS Video ( ) Captures video clips suitable for sending via MMS. Contacts Picture ( ) Captures a still image ...

Experiencing Multimedia 117 Camera mode icons and indicators The Camera [Photo] screen 2 1 3 6 4 5 7 8 1 Capture mode. Indicates the current capture mode. 2 Zoom-ratio. Indicates the current zoom ratio. Press NAVIGATION up or down to increase or decrease the zoom level. 3 Resolution. Indicates the i...

118 Experiencing Multimedia 7 White Balance. Indicates the current white balance setting. : Auto; : Daylight; : Night; : Incandescent; : Fluorescent. 8 Self-timer. Indicates the current Self-timer setting while capturing images. Click Menu > Self-timer to select the Self-timer setting Menu > S...

Experiencing Multimedia 119 The Review screen After capturing an image or recording a video clip, the Review screen appears allowing you to decide what to do with the image/video fi le. Icons for Photo, Video, MMS Video and Picture Theme modes. Icons for Contacts Picture mode. Icons for Sports mode. ...

120 Experiencing Multimedia Use Still Image capture modes While using Still Image capture modes such as Photo, Contacts Picture, Picture Theme or Sports, you can capture a single still image by clicking Capture . You can also press the CAMERA button or the ENTER button on the NAVIGATION control to c...

Experiencing Multimedia 121 The recording length of MMS video is fixed. The recording automatically stops when the preset length is reached. However, you can manually stop recording the video at any time. The time indicator at the top-right corner of the screen indicates the time limit.You can speci...

122 Experiencing Multimedia Capture mode Resolution Zoom range Video and MMS Video Small (128 x 96) Medium (176 x 144), default 1.0x, 2.0x 1.0x, 2.0x Small (160 x 120) 1.0x to 8.0x Photo Medium (320 x 24) 1.0x to 4.0x Large (640 x 480) 1.0x to 2.0x 1M (1280 x 1024), default 1.0x to 2.0x Contacts Pic...

Experiencing Multimedia 123 Option Allows you to Capture Mode Switch between different capture modes such as Photo, Video, Contacts Picture, and more. For details, see “Capture modes” earlier in this chapter. Effect Choose a special effect such as Grayscale , Sepia or Cool to apply to your photos or...

124 Experiencing Multimedia • Prefi x. Specify how to name captured images and video clips. When Default is selected, the fi le name of each new captured fi le is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_00001.jpg. You may also choose to name fi les using either the ...

Experiencing Multimedia 125 To copy a picture or video clip to your phone You can copy pictures from your PC and view them on your phone. • Copy the pictures and video fi les from your PC or a storage card to the My Pictures folder on your phone. For more information about copying files from your PC ...

126 Experiencing Multimedia Note You can specify how pictures are scaled to optimize their display in a slide show. Click Menu > Options , select Slide Show and choose either Portrait pictures or Landscape pictures . You can even set your phone to play a screensaver on its monitor if your phone i...

Experiencing Multimedia 127 3. Click View . 4. Click Menu > Use as Home Screen . 5. Select the display area and click Next . 6. Adjust the transparency. Select a higher percentage for a more transparent picture or a lower percentage for a more opaque picture. 7. Click Finish . To send pictures an...

128 Experiencing Multimedia To assign pictures to contacts You can assign a picture to a contact so that you can easily identify the contact at any time. 1. On the Home screen, click Start > Pictures & Videos . 2. Select the picture you want to assign to a contact. 3. Click Menu > Save >...

Experiencing Multimedia 129 7.3 Using Windows Media Player You can use Microsoft® Windows Media™ Player Mobile for Smartphone to play digital audio and video files that are stored on your phone or on a network, such as on a website.In this documentation, the version of Windows Media Player for Windo...

130 Experiencing Multimedia About the controls By default, these hardware buttons are assigned to Windows Media Player Mobile functions. To Press Play or pause ENTER Skip to a previous file NAVIGATION left Skip to the next file NAVIGATION right Increase the volume NAVIGATION up Decrease the volume N...

Experiencing Multimedia 131 Playback screen menu When you are viewing the Playback screen, these options appear on the Menu . Option Allows you to Library Display the Library screen so you can choose a file to play. Play/Pause Start or pause playback. Stop Stop playback. Shuffle/Repeat > Shuffle ...

132 Experiencing Multimedia Library screen menu When you are viewing the Library screen, these options appear on the Menu . Option Allows you to Queue Up Add the selected item to the end of the current (Now Playing) playlist. Delete from Library Delete the selected item from the library. Now Playing...

Experiencing Multimedia 133 Copy files to your phone Use the Sync feature in the desktop version of Windows Media Player to synchronize (copy) digital media files from your PC to your phone. Using Sync ensures that protected files and album art (for skins) are copied to your phone correctly. To sync...

134 Experiencing Multimedia Playlist File List Sync List • In the File List, which is the middle pane, multi-select desired files and then drag them to the Sync List. • Click the Start Sync button found at the bottom of the Sync List. Notes • Always use the desktop version of Windows Media Player 10...

Experiencing Multimedia 135 Play media To play media on your phone Use the library to find and play songs, videos and playlists that are stored on your phone or removable storage card. 1. If you are not on the Library screen, click Menu > Library . 2. If necessary, on the Library screen, click Me...

136 Experiencing Multimedia Change Player appearance You can change the appearance of the Playback screen by choosing a new skin. 1. If you are not on the Playback screen, press BACK to display the Playback screen. 2. Click Menu > Options > Skins . 3. To select a skin, press NAVIGATION left or...

Experiencing Multimedia 137 7.4 Using MIDlet Manager MIDlets are Java-based applications that can run on mobile devices. Your phone supports Java 2 Micro Edition (J2ME). The MIDlet Manager allows you to download Java-based applications, such as games and tools that are specifically designed for mobi...

138 Experiencing Multimedia • Device memory: ../Smartphone/My Documents/My MIDlets • Storage card: ../Smartphone/Storage Card Note If the My MIDlets folder does not exist in My Documents, you can create one with the same folder name. However, a folder named Storage Card automatically appears after y...

Experiencing Multimedia 139 2. Click Menu > Running . 3. Select a MIDlet on the Running MIDlets screen and click Menu > Stop . Note To stop all MIDlets currently running on your phone, click Menu > Stop All . Manage MIDlets You can organize the MIDlets into groups and define custom groups. ...

140 Experiencing Multimedia To uninstall a MIDlet Before you uninstall a MIDlet/MIDlet suite, make sure that it is not running. 1. On the Java Apps screen, select the MIDlet/MIDlet suite by using the NAVIGATION control. 2. Click Menu > Manage > Uninstall . 3. Click OK to confi rm. Note You cann...

Experiencing Multimedia 141 Please note that some features may not be available for all MIDlets/ MIDlet suites. A list of the security options that you can set for a running MIDlet/MIDlet suite follows. Security Option Description Net Access Determines whether a MIDlet/MIDlet suite can access the In...

Chapter 8 Using Other Applications 8.1 Using ClearVue Suite 8.2 Using Speed Dial

Using Phone Features 143 8.1 Using ClearVue Suite ClearVue Suite consists of four applications that let you view various types of documents such as Word documents, Powerpoint presentation files, Excel worksheets and Acrobat PDF files. The ClearVue Suite consists of the following: • ClearVue Presenta...

144 Using Phone Features To change the zoom ratio of the view mode • Click View > Scale . Note This only applies to Normal and Notes view modes. To set up your presentation show 1. Click View > Set Up Show . 2. In Advance Slides , select how you want to advance to the next slide. • Manually. P...

Using Phone Features 145 ClearVue Worksheet ClearVue Worksheet gives you the ability to view native Excel worksheets. It also lets you view embedded charts and chart sheets as well. Notes • ClearVue Worksheet only supports Excel files created in Office 97 or later versions. • Excel macros that might...

146 Using Phone Features After you open a file in ClearVue Document, it initially displays using the default Page Width setting. This means that the page is sized to fit within the available area of your Smartphone’s screen.Click Zoom to change the magnification as desired, then scroll through and v...

Using Phone Features 147 8.2 Using Speed Dial You can create speed dial entries for frequently-called numbers or frequently-accessed items so you can dial a number or access an item by pressing a single key. To create a speed dial entry for a contact 1. On the Home screen, click Start > Contacts ...

148 Using Phone Features To make a call or launch a program using Speed Dial • If you have assigned a speed dial (for example, the second location) to a contact or a program in Speed Dial, you can simply press and hold the 2 key on the Phone keypad to dial the contact’s number or launch the program....

Using Phone Features 149 To create a voice tag for a program To create a voice tag for a program, (in this example, Calendar) do the following: 1. On the Home screen, click Start and select (just highlight) the Calendar item. Calendar Calendar 2. Click Menu > Add Voice Tag . 3. After a “beep” sou...

A.1 Regulatory Notices A.2 PC Requirement to Run ActiveSync 4.x A.3 Specifications Appendix

Appendix 151 A.1 Regulatory Notices Agency identification numbers For regulatory identification purposes, your product (Smartphone) is assigned a model number of Cingular 3125/3100. The Battery Pack has been assigned a model number of STAR161.To ensure continued reliable and safe operation of your S...

152 Appendix • The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by High Tech Computer Corporation may void the user’s authority to operate the equipment. Important safety information Retain and follow all product safety and...

Appendix 153 Avoid wet areas Never use the product in a wet location. Avoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered. Mounting access...

154 Appendix contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 140 ° F (60 ° C). Exposure to radio frequency (RF) signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits f...

Appendix 155 Telecommunications & Internet Association (TIA) safety information Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pac...

156 Appendix Safety Precautions SAFETY IN AIRCRAFT: This product can cause interference to an aircraft's navigation system and network. In most countries it is against the law to use this product on board an airplane.ENVIRONMENTAL SAFETY: Do not use this product in gas stations, fuel stores, chemica...

Appendix 157 WEEE Notice The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.The purpose of this Directive is, as a first priority, the pr...