HP X2 - Manual

2 External component identification Tablet edge components Tablet edge components 3

Display Component Description (1) WLAN antennas (2)* Send and receive wireless signals. (2) Internal microphones (2) Record audio, automatically filtering out the noise around you and cancellingechoes. (3) Webcam (front) Records video and takes still photographs. Swipe from the right edge of the Tou...

Keyboard dock Top Component Description (1) Alignment posts Align and attach the tablet to the keyboard dock. (2) Release latch Releases the tablet. To release the tablet, slide therelease latch to the left. (3) Docking connector Connects the tablet to the keyboard dock. TouchPad Component Descripti...

Component Description (2) TouchPad zone Reads your finger gesture to move the pointer or activateitems on the screen. (3) Left TouchPad button Functions like the left button of an external mouse. (4) Right TouchPad button Functions like the right button on an external mouse. Lights Component Descrip...

Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn Displays system information when pressed in combination with the esc key. (3) Windows button Returns you to the Start screen from an open app or the Windowsdesktop. NOTE: Pressing t...

Left side Component Description (1) HDMI port Connects an optional video or audio device, such as a high-definition television, any compatible digital or audio component,or a high-speed HDMI device. (2) USB 2.0 port Connects an optional USB device. (3) Audio-out (headphone) jack/Audio-in(microphone)...

Releasing the tablet from the keyboard dock To release the tablet from the keyboard dock, follow these steps: 1. Slide the release latch on the keyboard dock to the left (1) . 2. Lift and remove the tablet (2) . Keyboard dock 13

3 Illustrated parts catalog Locating system information Important system information is located on the bottom edge of the tablet. You may need theinformation when traveling internationally or when you contact support: Item Description (1) ● Serial number ● Product number ● Warranty period ● Regulato...

4 Removal and replacement procedures CAUTION: This computer does not have user-replaceable parts. Only HP authorized service providers should perform the removal and replacement procedures described here. Accessing theinternal part could damage the computer or void the warranty. Preliminary replacem...

Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whetherthe computer is o...

Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexiblestraps with a minimum of one megohm ±10% resistance in the ground cords. To provide properg...

Base enclosure Description Spare part number Base enclosure (Black) 702349-001 Rubber feet 702363-001 Before disassembling the keyboard dock, follow these steps: 1. Shut down the keyboard dock. If you are unsure whether the computer is off or in Hibernation,turn the computer on, and then shut it dow...

4. Separate and release the bottom enclosure (1) , and then remove the bottom enclosure (2) . Battery Description Spare part number 2-cell, 25WHr 3.38AH Li-ion battery (Tablet) 694501-001 2-cell, 21WHr 2.86AH Li-ion battery (Keyboard dock) 694502-001 Before removing the battery, follow these steps: ...

Digital media card reader board Description Spare part number Digital media card reader 702359-001 Before removing the digital media card reader, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it down...

Hinge assembly removal Description Spare part number Hinge assembly 702354-001 Before removing the hinge, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it down through the operating system. 2. Discon...

Top cover with keyboard (includes) TouchPad module Description Spare part number TouchPad board (includes cable) 702368-001 Top cover with keyboard for use in the United States 702369-001 Top cover with keyboard for use in the United Kingdom and Singapore 702369-031 Top cover with keyboard for use i...

System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number For use only with computer models equipped with 64–GB devices 702366–001 For use only with W8 Standard computer models equipped with 64–GB devices 702366-501 For use only with W8 P...

2. Remove the 5 Phillips PM 2.0x3.0 screws (1) . 3. Remove the system board (2) . Reverse this procedure to install the system board. Tablet parts The following sections show the removal and replacement procedures for the tablet parts. 38 Chapter 4 Removal and replacement procedures

Display panel assembly and Battery NOTE: When disassembling or assembling the display panel, it is necessary to operate in a clean environment such as a clean room or clean work table. Description Spare part number 2–cell 25WHr 3.38 AH Li-ion battery 694501–001 11.6-in, HD, Anti-Glare WLED display p...

Touch screen connector board Description Spare part number Touch screen connector board 702351–001 Before removing the touch screen connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it d...

Audio/micro SD digital media card reader/touch screen board Description Spare part number Audio/micro SD digital media card reader/touch screen board 702357–001 Before removing the Audio/micro SD digital media card reader/touch screen board, follow thesesteps: 1. Shut down the computer. If you are u...

5 Setup Utility (BIOS) and SystemDiagnostics Using Setup Utility Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input andoutput devices on the system (such as disk drives, display, keyboard, mouse, and printer). SetupUtility includes settings for the types...

Navigating and selecting in Setup Utility To navigate and select in Setup Utility, follow these steps: 1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. ● To select a menu or a menu item, use the ta...

Restoring factory settings in Setup Utility NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Setup Utility to the values that were set at the factory, follow these steps: 1. Turn on or restart the computer, and then press esc while the “Press the ESC key for St...

Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currentlyinstalled on the computer, you need to know the version of the system BIOS currently installed. BIOS version information (also known as ROM date and System BIOS) can be displayed ...

4. Double-click the file that has an .exe extension (for example, filename.exe ). The BIOS installation begins. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your ha...

6 Specifications Computer specifications Metric U.S. Dimensions Width 29.16 cm 11.48 in Depth 2.15 cm 8.46 in Height (front to back) 2.11 to 3.19 cm 0.83 to 1.26 in Weight With 6-cell battery 1.60 kg 3.53 lb With 3-cell battery 1.46 kg 3.22 lb Input power Operating voltage and current 18.5 V dc @ 3....

7 Backing up, restoring, and recovering Your computer includes tools provided by HP and the operating system to help you safeguard yourinformation and retrieve it if you ever need to. These tools will help you return your computer to aproper working state or even back to the original factory state, ...

3. Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen. 4. Under Remove everything and reinstall Windows , select Get started , and follow the on- screen instructions. Recovering using HP Recovery Manager HP Recovery Manager software...

Changing the boot order If the computer does not restart in HP Recovery Manager, you can change the computer boot order,which is the order of devices listed in BIOS where the computer looks for startup information. You canchange the selection for an optical drive or a USB flash drive. To change the ...

8 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in thecountry or region where the equi...

9 Recycling When a non-rechargeable or rechargeable battery has reached the end of its useful life, do notdispose of the battery in general household waste. Follow the local laws and regulations in your areafor battery disposal. HP encourages customers to recycle used electronic hardware, HP origina...

Index Symbols/Numerics (webcam front), identifying 6 A AC adapter, spare part numbers 22 action keys identifying 10 antenna spare part numbers 19 audio board spare part numbers 20 audio, product description 1audio-out (headphone) jacks 5, 12 B back up personal files 68 backups 68base enclosure remov...