Page 3 - About This Book
About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set of...
Page 5 - Table of contents
Table of contents 1 Introduction Image updates ...................................................................................................................................... 2Setup Wizard ...........................................................................................................
Page 9 - Introduction
1 Introduction HP Compaq thin clients with Microsoft Windows CE are easy to deploy, manage, and secure, andinclude powerful features for mainstream business use. ● Easy to deploy ◦ Setup Wizard for easy configuration ◦ Familiar explorer shell that resembles Windows desktop ◦ Altiris Deployment Serve...
Page 11 - The Desktop
2 The Desktop The t5530 thin client with Microsoft Windows CE uses an explorer shell (desktop) that resembles thetypical Windows desktop to make it look familiar and easy to use. The desktop includes a taskbar, Startmenu, shortcut icons, and a background image. NOTE: The taskbar and the Start menu a...
Page 12 - Display; Taskbar
Display To change the display settings, right-click on the desktop and select Properties . You can change the following: ● background image ● appearance ● resolution and color quality settings ● screen saver NOTE: You must reboot for changes to the display settings to take effect. If you do not know...
Page 14 - HP Thin Connect
3 HP Thin Connect HP Thin Connect allows you to: ● Manage user accounts. ● Add, edit, and delete connections. ◦ Terminal emulation ◦ Microsoft Remote Desktop Client (RDP) connections ◦ HP PC Session Allocation Client (PC SAM) ◦ Internet Explorer ◦ Citrix ICA connections ● Assign connections to users...
Page 15 - Advanced Window
The HP Thin Connect window includes the following features: ● Connection display area : Lists all connections assigned to the user currently logged on to the terminal. For each connection, the display shows the name, type, and status of the connection. ● Connect : Click to activate a selected connec...
Page 16 - Creating user accounts
Creating user accounts You can set up terminal operator user accounts in the Security window, which you can access eitherfrom the Thin Connect Advanced window or from Control Panel. The system comes with three default accounts: ● Administrator ● Guest ● User You can use the default accounts as templ...
Page 20 - Connections
a. Select the items in the permissions list that you want to allow the user to access. If the useris an Administrator, select User is Administrator to provide full access. If you select User is Administrator , you cannot select or clear items in the list. b. To save your settings and add another use...
Page 21 - Adding connections; Editing connections
Adding connections To add a connection in HP Thin Connect: 1. In HP Thin Connect, click Add . 2. In the Choose type dialog box, select the type of connection you want to create, and then click OK . A Wizard or setup dialog for the connection type displays. 3. Follow the on-screen instructions in the...
Page 22 - Deleting connections; Assigning connections to users; Assign Connections tab
NOTE: Renaming a connection effectively deletes it from all user accounts. Deleting connections To delete a connection in HP Thin Connect: ▲ Select the connection, and then click Delete . The connection is deleted from all user connection lists. Assigning connections to users Assign and configure co...
Page 24 - Assigning connections
the setting. NOTE: You must configure HP Thin Connect to auto start for this setting to functionproperly. To configure Thin Connect to automatically start up, see Auto starting HP Thin Connect on page 18 . ◦ Persistent : Determines whether the system will attempt to reconnect when a connection fails...
Page 25 - Enabling automatic connection and reconnection
To designate a connection as primary or secondary: 1. In the HP Thin Connect window, click Advanced . 2. On the Assign Connections tab, select the appropriate user from the User list. 3. Select the connection from the user’s connection list that you want to make primary. 4. In the Primary column, cl...
Page 26 - Configuring the user interface; Auto starting HP Thin Connect
6. In the Persistent column, if the entry for the selected connection is No , click on No to change it to Yes . 7. To arrange the order of connections, select a connection and click the up and down arrows.Secondary connections are associated with the first primary connection above them in the list. ...
Page 28 - Enabling automatic log on and keyboard functions
8. Click Apply to save your changes, or click OK to save your changes and exit the Advanced window. 9. Log off the user for all changes to take effect. Enabling automatic log on and keyboard functions The Security window in Control Panel allows you to enable automatic log on which bypasses a user’sp...
Page 29 - Switching to a different user
on the dialog box to log in. If someone other than the auto logon user wants to log onto the terminal,press Esc or Alt+F4 . 6. From the Account list, select the account that the system will use to log on the terminal operator. 7. Select Enable Reset Hotkey to allow the terminal to be reset to factor...
Page 31 - Accessibility
Accessibility The Accessibility dialog box allows you to configure the terminal with 508 Accessibility features.Accessibility options are available for the keyboard, sound, display, and mouse. ● Keyboard : Allows you to enable StickyKeys, which lets you use the Shift , Ctrl , and Alt keys pressing o...
Page 32 - Boot Settings
Boot Settings The Boot Settings dialog box allows you to configure the thin client boot order. Boot Device Order : Select to enable the device to which the thin client boots. Use the up and down arrows to the left of the list to change the position of a selected device. NOTE: You cannot clear (disab...
Page 33 - Certificates
Certificates The Certificates dialog box allows you to import, store, and view security certificates. Certificates andcertificate authorities ensure that an SSL connection is made to the intended secure server. Certificateinformation is exchanged between the terminal browser and the secure server wh...
Page 34 - DHCP Options
Date/Time The Date/Time Properties dialog box allows you to set the date and current time, select the appropriatetime zone, and enable automatic clock adjustment for daylight savings time for the terminal. ▲ Select the appropriate date and time information, and then click Apply . DHCP Options The DH...
Page 35 - Dialing
To change port values: 1. Double-click on the name of the option to change. A dialog box displays with a list of all valid options. 2. Select the appropriate value from the list, and then click OK . Dialing The Dialing Properties dialog box allows you to: ● Add or select a dialing location. ● Config...
Page 38 - Global ICA Client Settings
Global ICA Client Settings The Global ICA Client Settings dialog box allows you to configure ICA default client settings. Keyboard Shortcuts The Keyboard Shortcuts tab allows you to configure hot key combinations that you can use during active ICA sessions. You can assign the hot keys used to perfor...
Page 39 - Preferences
Preferences The Preferences tab allows you to set color preferences during an ICA session. The Preferences tab contains the following: ● Serial Number : Type the serial number of the ICA Client software exactly as it appears on the serial number card. This is necessary when using the ICA Windows CE ...
Page 41 - Thin State Capture
In the SSL/TLS Relay section, type the relay address and port for the Socket Security Layer (SSL) or Transport Layer Security (TLS) protocol. If the firewall uses address remapping, you must configure the client to use the alternate addressreturned by the data collector by selecting Use alternate ad...
Page 43 - Thin State Deploy; Internet Options
Thin State Deploy To perform a ThinState deployment: 1. Set the boot order in the F10 System Bios to USB boot (if necessary). 2. Attach the USB flash drive to the thin client unit you wish to deploy the captured image to, and thenpower on the unit. 3. Follow the on-screen instructions. After you rem...
Page 45 - LPD Control
e. Click OK . f. Click OK to exit the JETCET dialog box. NOTE: For more information, refer to the JETCET user guide at http://www.westtek.com/support/ pocketpc/jetcet.html . NOTE: Internet Explorer uses LPT1 as its default printer port. If you want to print using a different port, in Internet Explor...
Page 46 - Modems
To set the terminal up as a print server: 1. Select Enable Printer . 2. Type the Printer Name and Network Port . 3. Select the appropriate printer port from the list. If you select a COM port, you have the option ofconfiguring the serial port by clicking Configure and typing the appropriate paramete...
Page 47 - Mouse; Network and Dial-up Connections
Refer to the device instructions that shipped with the modem, or located on the manufacturer Web site,for listings of modem “AT” commands available for the modem. Mouse The Mouse Properties dialog box allows you to set the mouse double-click sensitivity for speed andphysical distance between clicks....
Page 48 - Direct connection; Virtual Private Network (PPTP) connection
● VPN (L2TP) ● Ethernet (PPPoE) Dial-up connection You can use a dial-up modem with the thin client to access a dial-up server. This method provides twoways to access the enterprise intranet: ● An enterprise dial-up server connects directly to the enterprise intranet. ● An Internet Service Provider ...
Page 49 - Port Lock; Power Settings
Port Lock The Port Lock dialog box allows you to enable or disable COM 1 ports, LPT ports, and USB mass storagedevices. To enable a port, select the appropriate check box, and then click OK . Power Settings The Power Settings dialog box allows you to configure settings such as BIOS wake-up, power st...
Page 50 - Adding a printer
RDP/ICA Printers The RDP/ICA Printers dialog box allows you to add local RDP/ICA printer configurations and modifyexisting RDP/ICA printer configurations. This configuration enables the terminal to print from an RDP/ICA server session to a local printer. NOTE: Windows CE is best suited for printing ...
Page 52 - Modifying an existing printer configuration; Regional Settings
Modifying an existing printer configuration To modify an existing printer configuration in the Printers dialog box: 1. Double-click the desired printer icon or select the icon and click Properties . The Printer Properties dialog box displays. 2. Make any necessary modifications, and then click OK to...
Page 53 - Security; Enabling security
Security The Security dialog box allows you to control various terminal functions related to security and terminaloperator accounts. Enabling security System security is enabled by default, which forces users to log in if the automatic login feature is notenabled. ● Select Lock screen when pressing ...
Page 54 - Creating a user account; SNMP
Creating a user account To create a new security account for a terminal operator, select the Users tab on the Security dialog box. This tab lists all the operator accounts and shows which accounts are set up with Administratorsecurity privileges and which accounts are enabled. For more information a...
Page 59 - SNTP Client
SNTP Client The SNTP dialog box allows administrators to synchronize the clocks on all thin clients. Administratorscan set thin clients to automatically synchronize with an Internet time server or with a boot server. Synchronization can occur only when your computer is connected to the Internet. NOT...
Page 60 - System
System The System Properties dialog box allows you to view manufacturer and product information, networksettings, and copyright information. You can also reset the terminal to default factory settings, adjustthe memory allocated for storage and running programs, assign a device name for network iden...
Page 62 - System Update
For more information about exporting registry settings, see Chapter 6, Registry Import/Export on page 72 . System Update The System Update dialog box allows you to define the means by which you update the terminal image.The feature updates only the operating system, The BIOS is not updated. You can ...
Page 64 - Terminal Server Client Licenses
6. Select Check for updates at startup to cause the unit to check the entered FTP site for software updates. 7. Click Connect to connect to the server you configured in the previous steps. The Connect button is not available until you enter valid information for the server. 1. Select Use Values from...
Page 65 - VNC Server
View or Remove Programs The View or Remove Programs dialog box allows you to view or remove software programs currentlyinstalled on the terminal. To remove a program, select the program from the list and click Remove . VNC Server Virtual Network Computing (VNC) is a remote control program that allow...
Page 66 - Settings for VNC Server
Settings for VNC Server Configure VNC Server on your thin client by selecting the following: Check Box Explanation Prompt local user to accept incomingconnections The default should be ENABLED and Auto Accept should be ENABLED Enable Viewer Cursor This setting allows the viewer to show its cursor on...
Page 68 - Programs; ThinPrint over TCP/IP
Programs ThinPrint The following steps illustrate how to set up ThinPrint over TCP/IP. ThinPrint can also be used for ICA/RDP sessions, provided a TCP/IP connection exists between server and client. You must set upThinPrint on the server before attempting any ThinPrint jobs. For more information abo...
Page 72 - ThinPrint Network Printer
13. Open a any Word document and click File > Print . 14. Select the printer from the list. The display format is printer name#computer name . (For example, hp_LaserJet_1150#HP000AE495D355:1 ) 15. Click OK to print the document. ThinPrint Network Printer 1. Open ThinPrint. 2. Click the Assignment...
Page 74 - HP Connections for Citrix Software; Creating a New ICA connection
8. Open ThinPrint and select the printer you just added from the drop-down list. 9. Log in to ICA or RDP. 10. Open any Word document. and then select Print . 11. Select the printer from the list. 12. Select OK to print the document. HP Connections for Citrix Software The HP Connections for Citrix So...
Page 75 - Deleting a connection; Editing a connection; Creating a desktop shortcut to a connection
Deleting a connection To delete an established connection: 1. Right-click on the connection and select Delete Connection . or Select the connection and press the Delete key. 2. Click Yes to delete the connection. NOTE: Deleting a connection through HP Connections for Citrix Software also deletes the...
Page 76 - Terminal Emulation Connection
● Local-printer redirection so server applications can print locally to the client device. ● Local audio playback so server applications can direct audio to the client device or play at theTerminal Server. ● Local-port redirection so server applications can use parallel and COM ports of the client d...
Page 78 - USB Wireless
Messenger 5.0 The Windows Messenger 5.0 add-on adds the following functionality: ● Support for categorizing contacts into groups and for dragging and dropping contacts. ● User Interface (UI) improvements, including system tray notifications (known as alerts) for incomingmessages, and ToolTip support...
Page 80 - Clearing the destination registry
6 Registry Import/Export ATTENTION : When deploying an image and settings from a “source” or “master” thin client to a “target” thin client, please make sure that source/master and target thin clients have identical hardware. This isapplicable regardless of deployment method being used: HP ThinState...
Page 82 - Index
Index Symbols/Numerics 508 Accessibility features 23 A Accessibility 23accounts default 8user 8 add-ons 59, 69adding connections 7, 13permissions 11printers 36, 42rights to community 47shortcut 67SNMP packets 48user accounts 8 Advanced window 7Altiris Deployment Server 72appearance scheme 28area cod...
