HP Wireless Device - Manual

Using the wireless controls You can control the wireless devices in your computer using these features: ● Wireless button or wireless switch (referred to in this guide as the wireless button) ● Wireless Assistant software (select models only) ● Operating system controls Using the wireless controls 3

Using the wireless button The computer has a wireless button, one or more wireless devices, and one or two wireless lights,depending on the model. All of the wireless devices on your computer are enabled at the factory, so thewireless light is on (blue) when you turn on the computer. The wireless li...

Using Wireless Assistant software (select models only) A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device isdisabled by the Setup Utility, it must be reenabled by the Setup Utility before it can be turned on or offusing Wireless Assistant. NOTE: Ena...

Using operating system controls Some operating systems also offer a way to manage integrated wireless devices and the wirelessconnection. For example, Windows provides the Network and Sharing Center that allows you to set upa connection or network, connect to a network, manage wireless networks, and...

2 Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of othercomputers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. ● A l...

Setting up a WLAN To set up a WLAN and connect to the Internet, you need the following equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● The wireless computer (3)...

Connecting to a WLAN To connect to the WLAN, follow these steps: 1. Be sure that the WLAN device is on. If it is on, the wireless light is on. If the wireless light is off,press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. Select Start ...

Inserting a SIM CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM. To insert a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn thecomputer on by pressing the power button. Then shut down the computer through t...

Removing a SIM To remove a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn thecomputer on by pressing the power button. Then shut down the computer through the operatingsystem. 2. Close the display. 3. Disconnect all external devices connected ...

Bluetooth and Internet Connection Sharing (ICS) HP does not recommend setting up one computer with Bluetooth as a host and using it as a gateway through which other computers may connect to the Internet. When two or more computers are connectedusing Bluetooth, and Internet Connection Sharing (ICS) i...

Cannot connect to a WLAN If you have a problem connecting to a WLAN, confirm that the integrated WLAN device is properlyinstalled on your computer: NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password fo...

Cannot connect to a preferred network Windows can automatically repair a corrupted WLAN connection: ● If there is a network status icon in the notification area, at the far right of the taskbar, right-click theicon, and then click Diagnose and repair from the menu. NOTE: To display the network statu...

Network status icon is not displayed If the network status icon is not displayed in the notification area after you configure the WLAN, thesoftware driver is either missing or corrupted. A Windows “Device not Found” error message may alsobe displayed. The driver must be reinstalled. Get the latest v...

Current network security codes are unavailable If you are prompted for a network key or an SSID when connecting to a WLAN, the network is protectedby security. You must have the current codes to make a connection on a secure network. The SSID andnetwork key are alphanumeric codes that you enter into...

WLAN connection is very weak If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimizeinterference from other devices, as follows: ● Move your computer closer to the wireless router or access point. ● Temporarily disconnect devices such as a microwave, cordless...

Index B Bluetooth device 1, 15 C connecting to a WLAN 10corporate WLAN connection 10 E encryption 9 F firewall 9 H HP Mobile Broadband 12HP Mobile Broadband, disabled 13 I icons network status 2, 20wireless 2 interference, minimizing 22Internet connection setup 8 M minimizing interference 22 N netwo...