HP TFT7600 - Manual

Introduction 7 Reference number Component Function 5 Scroll lock LED 6 Cap lock LED 7 Number lock LED 8 Touchpad 9 Left pick button 10 Middle pick button 11 Right pick button 12 Scroll bar 13 USB pass thru Pass thru to the rear USB port (callout 1 in the following figure) Rear components Reference n...

Installation 8 Installation Installing the TFT7600 RKM The following section covers the installation and setup procedure for installing the TFT7600 RKM. Kit contents The kit contains: • TFT7600 RKM (1) • M6 screws (4) • 6-32 screws (5) • HP Adjustable Toolless Rails (2) • Cable management arm, power...

Installation 12 9. Connect and route the cables through the cable management arm and unit opening. Installation is complete. Accessing the TFT7600 RKM 1. Gently extend the TFT7600 RKM until the slides lock. 2. Push the display release latch then lift the display. Removing the HP TFT7600 RKM To remov...

Installation 13 Removing the HP 1U Adjustable Toolless Rails 1. Locate the spring release. 2. Place your hand on the outside of the HP 1U Adjustable Toolless Rails so that you can move the spring release. 3. Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adju...

Operational overview 15 Operational overview On-screen display The OSD buttons are used to operate the TFT7600 RKM OSD menus. Reference number Component Function 1 OSD scroll up and down button Used to scroll in the OSD menu and adjust the function 2 OSD activation button • Launches OSD menus • Sele...

Operational overview 16 • Use the Up (+) or Down (-) button to scroll through the OSD menu or an OSD sub-menu. The Up (+) and Down (-) button are also used to adjust or change a function setting. • Use the OSD activation button to select a sub-menu or a function. Example: To exit the OSD menu: 1. Pr...

Operational overview 17 Vertical position The V position option displays a slider bar to enable the adjustment of the screen's vertical position. The center of the bar is obtained from the factory-preset value for Vertical Position. Clock The Clock option displays a slider bar to enable the adjustme...

Operational overview 18 Auto Configuration The Auto Configuration option performs four functions automatically: • Auto Level—Automatically adjusts the black and white levels of the screen • Auto Position—Automatically adjusts the position of the screen • Auto Phase—Automatically adjusts the phase • ...

Maintenance 19 Maintenance Maintenance and shipping guidelines This section covers maintenance and shipping guidelines for your TFT7600 RKM. To protect your unit from overheating and other types of damage: • Use only a power source and connection appropriate for this unit, as indicated on the markin...

Maintenance 20 Shipping the TFT7600 RKM Keep the original packing box in a storage area in case you must move or ship your RKM. Moving a rack with the TFT7600 RKM installed When moving the TFT7600 RKM installed in a rack, HP recommends that you install the lock plates, included in your kit, on each ...

Specifications 21 Specifications TFT7600 RKM specifications Item Specifications Display size 43.18 cm (17 in) Display type Flat panel, active matrix-TFT LCD Viewable image size 43.18 cm (17 in) diagonal Maximum weight (unpacked) 4.54 kg (10 lb) Maximum height 4.23 cm (1.68 in) Maximum depth 42.31 cm...

Regulatory compliance notices 22 Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the pro...

Regulatory compliance notices 23 energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter...

Regulatory compliance notices 24 This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B equipment This Class B dig...

Regulatory compliance notices 25 Japanese notice BSMI notice Korean notice Class A equipment Class B equipment

Regulatory compliance notices 26 Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your ...

Electrostatic discharge 27 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boar...

Technical support 28 Technical support HP contact information For the name of the nearest HP authorized reseller: • In the United States, see the HP US service locator webpage ( http://www.hp.com/service_locator ). • In other locations, see the Contact HP worldwide (in English) webpage ( http://welc...

Acronyms and abbreviations 29 Acronyms and abbreviations LCD liquid crystal display OSD on-screen display RETMA Radio Electronics Television Manufactures Association (rack spacing) RKM rackmount keyboard monitor TFT thin film transistor USB universal serial bus

Index 30 A accessing the unit 12 Advanced 17 authorized reseller 28 auto-configuration process 18 B BSMI notice 25 C cable connectors 13 Canadian notice 23 Clock Adjust 17 components 6, 7 D Declaration of Conformity 23 default 17 disposal, material 26 E electrostatic discharge 27 F factory default s...