HP SB40c - Manual
HP SB40c – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – QuickSpecs; HP StorageWorks SB40c storage blade; Product Highlights
- Page 5 – Service and Support, HP Care Pack, and Warranty Information
- Page 6 – Step 1: Base Storage Blade Configuration
- Page 7 – Options
- Page 8 – Storage
- Page 9 – Technical Specifications
The HP StorageWorks SB40c is a half-height c-Class storage blade supporting up to six hot-plug Small Form Factor (SFF)
Serial Attached SCSI (SAS) or Serial ATA (SATA) hard disk drives. Using the onboard Smart Array P400, the SB40c
provides industry-leading performance, availability, and storage density, to meet customers' demanding and growing storage
needs. The SB40c supports direct attach storage to HP BladeSystem c-Class Servers.
1. Hard Drive Bay 1
4. Hard Drive Bay 4
2. Hard Drive Bay 2
5. Hard Drive Bay 5
3. Hard Drive Bay 3
6. Hard Drive Bay 6
What's New
Support for HP BladeSystem c3000 Enclosure
Support for 36GB and 72GB, 15K rpm, SFF Serial Attached SCSI (SAS) Hard Drives
At A Glance
Storage Controller:
Smart Array P400 RAID controller with 256MB cache, supports RAID 0/1/5/6 (ADG).
Internal Drive Support:
Supports up to six (6) SAS or SATA hot plug hard disk drives
Allows for the mix of SAS and SATA drives in the same enclosure at the same time
Form Factor:
4U c-Class storage blade
Warranty:
Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3
Year Labor and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply. SATA hard
drives have a one year warranty
Models
The SB40c allows for the mix of SAS and SATA drives in the same enclosure at the same time and is tailored to the needs
of HP server blade customers who require optimized direct attach storage.
HP StorageWorks SB40c storage blade
411243-B21
QuickSpecs
HP StorageWorks SB40c storage blade
Overview
DA - 12587 Worldwide QuickSpecs — Version 7 — 9/12/2007
Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Key Features Features of the SB40c include: SFF (SAS/SATA) support - Delivering data transfer rates up 3Gb/s for SAS and 1.5Gb/s for SATA Support for up to six (6) SFF SAS or SATA drives provides up to 876GB of storage capacityin a half-height blade.Simple configuration and setup with HP's Array Con...
Warranty Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3 Year Labor and 3 Year on-site limited global warranty. Certain restrictions andexclusions apply. Hard drive Pre-Failure Warranty: When used with any one of the Smart Array Family controll...
NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factor...
