Page 2 - Notice; is a trademark of Intel Corporation.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...
Page 3 - Contents
Contents 1 Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before installing the network adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to Forcibly Modify Resources Allocated to the Intel EtherExpress Pro10...
Page 5 - Read This First; Before installing the network adapter:; If your OS is Windows 98 2; edition, go into the BIOS setup and set PnP
3 Read This First 1 Read This First Before installing the network adapter: • If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS field to YES. • If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field to NO. • If your OS is Windows 98 2 nd edition, go into the BIO...
Page 6 - Connecting to a Novell NetWare 5.0 Server; Requirements; Connect the network cable to the newly installed network adapter.
4 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 2 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed networ...
Page 7 - Known Problems
5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 12 Select either “Typical” or “Custom” and click on “Install”. Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installatio...
Page 8 - Problem 2; To prevent this problem:
6 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 Problem 2 Windows 95 will lose all network connections when the system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/Q23...
Page 9 - Connecting to a Microsoft Windows NT 4.0 Server
7 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 SR2.5 3 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly inst...
Page 11 - Connecting to a Novell NetWare 4.11 Server
9 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 4 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed netw...
Page 14 - Connecting to a Novell NetWare 5.0 Server
12 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the n...
Page 15 - Complete the network card installation by clicking on “Next”.
13 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “Next”. 15 Type in the path to your Windows NT files and click “Continue”. 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP inf...
Page 16 - Connecting to a Microsoft Windows NT 4.0 Server
14 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 6 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network ca...
Page 18 - Connecting to a Novell NetWare 4.11 Server
16 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 7 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the...
Page 20 - Connecting to a Novell NetWare 5.0 Server
18 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2nd edition 8 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2 nd edition Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly in...
Page 21 - Connecting to a Microsoft Windows NT 4.0 Server
19 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2nd edition 9 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2 nd edition Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to ...
Page 22 - 0 Connecting to a Novell NetWare 4.11 Server
20 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2nd edition 10 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2 nd edition Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly...
Page 23 - 1 Connecting to a Windows NT 4.0 Server
21 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 11 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newl...
Page 24 - Click “OK” at the “Network Setup” dialog box.
22 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 13 Click “OK” at the “Network Setup” dialog box. 14 If needed, enter changes to the “Microsoft Windows Network Names” dialog box and click “OK”. 15 Windows will prompt for the location of several files. Type the path to ...
Page 25 - 2 Connecting to a Novell NetWare 4.11 Server
23 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 12 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable t...
Page 26 - Type in the location of the 32-bit LAN driver and click “Add”.
24 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 13 Insert the driver disk and click on “Have Disk…” when prompted for drivers. 14 Type in the location of the 32-bit LAN driver and click “Add”. 15 Click “Next” to continue with the installation. 16 Modify the LAN a...
