HP P2050 - Manual

Product comparison HP LaserJet P2050 Series models HP LaserJet P2055d printer CE457A HP LaserJet P2055dn printer CE459A HP LaserJet P2055x printer CE460A ● Prints up to 35 pages per minute (ppm)on Letter size paper and 33 ppm on A4size paper ● Contains 64 megabytes (MB) of randomaccess memory (RAM) ...

Product features Feature Description Performance ● 600 MHz processor User interface ● 2-line display ● HP ToolboxFX software (a Web-based status and problem-solving tool) ● Windows® and Macintosh printer drivers ● Embedded Web server to access support and order supplies (for network-connected models...

Product walkaround Front view 6 1 8 7 3 5 2 4 1 Tray 1 (pull to open) 2 Top output bin 3 Control panel 4 Print-cartridge-door release button 5 On/off switch 6 Optional Tray 3 (included with the HP LaserJet P2055x printer) 7 Tray 2 8 Print-cartridge door ENWW Product walkaround 5

Rear view 6 1 2 7 34 5 1 Jam-release door (pull the green handle to open) 2 Straight-through paper path (pull to open) 3 DIMM cover (provides access to the DIMM slot) 4 Interface ports 5 Rear duplex jam-release door 6 Power connection 7 Slot for a cable-type security lock 6 Chapter 1 Product basics ...

Interface ports 1 2 1 Hi-speed USB 2.0 connection, for connecting directly to a computer 2 RJ.45 network connection (network models only) Model and serial-number label location The label that contains the model and serial numbers is on the outside of the rear output (straight-throughpaper path). ENW...

2 Control panel ● Control-panel layout ● Use the control-panel menus ● Reports menu ● System setup menu ● Service menu ● Network config. menu ENWW 9

Use the control-panel menus To gain access to the control-panel menus, complete the steps below. Use the menus 1. Press OK . 2. Press the down arrow or the up arrow to navigate the listings. 3. Press OK to select the appropriate option. 4. Press the back button to return to the previous level. The f...

Reports menu Use the Reports menu to print reports that provide information about the product. Menu item Description Demo page Prints a page that demonstrates print quality. Menu structure Prints a map of the control-panel-menu layout. The active settings for each menuare listed. Config report Print...

System setup menu Use this menu to establish basic product settings. The System setup menu has several sub-menus. Each is described in the following table. Menu item Sub-menu item Sub-menu item Description Language Select the language for the control-paneldisplay messages and the product reports. Qu...

Service menu Use this menu to restore default settings, clean the product, and activate special modes that affect printoutput. Menu item Description Cleaning mode Use this option to clean the product if you see toner specks or other marks on theprinted output. The cleaning process removes dust and e...

3 Software for Windows ● Supported operating systems for Windows ● Supported printer drivers for Windows ● HP Universal Print Driver (UPD) ● Priority for print settings ● Change printer-driver settings for Windows ● Software installation types for Windows ● Remove software for Windows ● Supported ut...

Supported operating systems for Windows The product supports the following Windows operating systems: ● Windows XP (32-bit and 64-bit) ● Windows Server 2003 (32-bit and 64-bit) ● Windows 2000 (driver only) ● Windows Vista (32-bit and 64-bit) Supported printer drivers for Windows ● HP PCL 5 Universal...

HP Universal Print Driver (UPD) The HP Universal Print Driver (UPD) for Windows is a single driver that gives you instant access tovirtually any HP LaserJet product, from any location, without downloading separate drivers. It is built onproven HP print driver technology and has been tested thoroughl...

Priority for print settings Changes to print settings are prioritized depending on where the changes are made: NOTE: The names of commands and dialog boxes might vary depending on your software program. ● Page Setup dialog box : Click Page Setup or a similar command on the File menu of the program y...

Change printer-driver settings for Windows Change the settings for all print jobsuntil the software program is closed Change the default settings for allprint jobs Change the product configurationsettings 1. On the File menu in the software program, click Print . 2. Select the driver, and then click...

Software installation types for Windows You can choose from the following types of software installations: ● Basic Installation (Recommended) . Installs the minimum set of drivers and software. This installation type is recommended for network installations. ● Full Installation . Installs the full s...

Supported utilities for Windows HP ToolboxFX HP ToolboxFX is a software program that you can use for the following tasks: ● Checking the product status ● Checking the supplies status and ordering supplies online ● Setting up alerts ● Setting up e-mail notification for certain product and supplies ev...

Supported network utilities for Windows HP Web Jetadmin HP Web Jetadmin is a browser-based management tool for HP Jetdirect-connected printers within yourintranet, and it should be installed only on the network administrator’s computer. To download a current version of HP Web Jetadmin and for the la...

4 Use the product with Macintosh ● Software for Macintosh ● Use features in the Macintosh printer driver ENWW 27

Software for Macintosh Supported operating systems for Macintosh The product supports the following Macintosh operating systems: ● Mac OS X V10.3, V10.4, V10.5, and later NOTE: For Mac OS X V10.4 and later, PPC and Intel® Core™ Processor Macs are supported. Supported printer drivers for Macintosh Th...

Change printer-driver settings for Macintosh Change the settings for all print jobsuntil the software program is closed Change the default settings for allprint jobs Change the product configurationsettings 1. On the File menu, click Print . 2. Change the settings that you wanton the various menus. ...

Use features in the Macintosh printer driver Print Create and use printing presets in Macintosh Use printing presets to save the current printer driver settings for reuse. Create a printing preset 1. On the File menu, click Print . 2. Select the driver. 3. Select the print settings. 4. In the Preset...

Print on both sides of the page Use automatic two-sided printing 1. Set the product for the correct width of paper that you are using. At the back of the product, lift theduplex jam-release door, and locate the blue paper-width selection lever. ● Letter and Legal-size paper : Push the lever in. ● A4...

Use the Services menu If the product is connected to a network, use the Services menu to obtain product and supply-status information. 1. On the File menu, click Print . 2. Open the Services menu. 3. To open the embedded Web server and perform a maintenance task, do the following: a. Select Device M...

5 Connectivity ● USB configuration ● Network configuration ENWW 35

USB configuration The product has a Hi-Speed USB 2.0 port. The USB cable can be a maximum of 2 meters (6 feet) long. Connect the USB cable Plug the USB cable into the product. Plug the other end of the USB cable into the computer. 1 Type B USB port 2 Type B USB connector 36 Chapter 5 Connectivity EN...

Network configuration You might need to configure certain network parameters on the product. You can configure theseparameters from the control panel, the embedded Web server, or for most networks, from the HP WebJetadmin software. Supported network protocols The product supports the TCP/IP network ...

Service name Description SNMP (simple network management protocol) Used by network programs for product management. SNMPV3 and standard MIB-II (Management Information Base)objects are supported. Web Jetadmin (WJA) Management application that provides controlled access toHP Jetdirect and printer feat...

NOTE: This mode is the recommended network configuration for the product. 1. Before turning on the product, connect the product directly to the network by inserting a networkcable into the product network port. 2. Turn on the product, wait 2 minutes, and then use the control panel to print a configu...

IP address The product IP address can be set manually, or it can be configured automatically via DHCP, BootP, orAutoIP. Automatic configuration 1. On the control panel, press OK . 2. Use the arrow buttons to select Network config. , and then press OK . 3. Use the arrow buttons to select either BOOTP...

Link speed setting NOTE: Incorrect changes to the link speed setting might prevent the product from communicating with other network devices. For most situations, the product should be left in automatic mode. Changes cancause the product to power cycle. Changes should be made only while the product ...

6 Paper and print media ● Understand paper and print media use ● Supported paper and print media sizes ● Custom paper sizes ● Supported paper and print media types ● Tray and bin capacity ● Special paper or print media guidelines ● Load trays ● Configure trays ● Use paper output options ENWW 43

Understand paper and print media use This product supports a variety of paper and other print media in accordance with the guidelines in thisuser guide. Paper or print media that does not meet these guidelines might cause the following problems: ● Poor print quality ● Increased jams ● Premature wear...

Size and dimensions Tray 1 Tray 2 Optional 500-sheetTray 3 Duplexer 176 x 250 mm (6.7 x 9.8 inches) Envelope C5 ISO 162 x 229 mm (6.93 x 9.84 inches) Envelope DL ISO 110 x 220 mm (4.33 x 8.66 inches) Envelope Monarch 98 x 191 mm (3.9 x 7.5 inches) Custom 76 x 127 mm to 216 x 356 mm (3.0 x 5.0 inches...

Supported paper and print media types For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/ ljp2050series . Paper type (control panel) Paper type (printer driver) Tray 1 Tray 2 Optional 500-sheet Tray 3 Duplexer PLAIN 75–95 G Plain LIGHT 60-74 G Light 6...

Tray and bin capacity Tray or bin Paper type Specifications Quantity Tray 1 Paper Range: 60 g/m 2 (16 lb) bond to 200 g/m 2 (54 lb) bond Maximum stack height: 5 mm(0.3 inch) Equivalent to 50 sheets of 75 g/m 2 (20 lb) bond Envelopes Less than 60 g/m 2 (16 lb) bond to 90 g/m 2 (24 lb) bond Up to 10 e...

Special paper or print media guidelines This product supports printing on special media. Use the following guidelines to obtain satisfactoryresults. When using special paper or print media, be sure to set the type and size in your print driver toobtain the best print results. CAUTION: HP LaserJet pr...

Load trays Paper orientation for loading trays If you are using paper that requires a specific orientation, load it according to the information in thefollowing table. Tray Single-sided printing Duplex printing Envelope printing Tray 1 Face-up Top edge leading into the product Face-up Top edge leadi...

Tray 2 and optional Tray 3 Media guides ensure that the media feeds correctly into the printer and that the print is not skewed.Tray 2 has side and rear media guides. When loading media, adjust the media guides to match thelength and width of the media that you are using. NOTE: When you add new medi...

Manual feed You can use manual feed when printing mixed media. For example, you can use manual feed to printan envelope, then a letter, then an envelope, and so on. Load envelopes in Tray 1 and load letterheadinto Tray 2. To print using manual feed, open the printer Properties or Printer Setup, and ...

Configure trays 1. Press OK . 2. Press the down arrow to select System setup , and then press OK . 3. Press the down arrow to select Paper setup , and then press OK . 4. Press the down arrow to select the desired tray, and then press OK . 5. Press the down arrow to select Paper type or Paper size , ...

Use paper output options The product has two output locations: the top (standard) output bin and the straight-through paper path(rear output). Print to the top (standard) output bin The top output bin collects paper face-down, in the correct order. The top output bin should be used formost print job...

7 Use product features ● EconoMode ● Quiet mode ENWW 57

8 Print tasks ● Cancel a print job ● Use features in the Windows printer driver ENWW 61

Cancel a print job You can stop a print request by using the control panel or by using the software program. For instructionsabout how to stop a print request from a computer on a network, see the online Help for the specificnetwork software. NOTE: It can take some time for all printing to clear aft...

Use features in the Windows printer driver NOTE: The following information is for the HP PCL 6 printer driver. Open the printer driver How do I Steps to perform Open the printer driver On the File menu in the software program, click Print . Select the printer, and then click Properties or Preference...

Set paper and quality options To perform the following tasks, open the printer driver and click the Paper/Quality tab. How do I Steps to perform Select a page size Select a size from the Paper size drop-down list. Select a custom page size a) Click Custom . The Custom Paper Size dialog box opens. b)...

Set document finishing options To perform the following tasks, open the printer driver and click the Finishing tab. How do I Steps to perform Print on both sides (Duplex) 1. Set the product for the correct width of paper that you areusing. At the back of the product, lift the duplex jam-release door...

How do I Steps to perform 3. In the Booklet layout drop-down list, click Left binding or Right binding . The Pages per sheet option automatically changes to 2 pages per sheet . 4. Click the OK button to print the job. Print multiple pages per sheet a) Select the number of pages per sheet from the Pa...

Set advanced printing options To perform the following tasks, open the printer driver and click the Advanced tab. How do I Steps to perform Select advanced printing options In any of the sections, click a current setting to activate a drop-down list so you can change the setting. Change the number o...

9 Manage and maintain the product ● Print the information pages ● Use the HP ToolboxFX software ● Manage a network product ● Lock the product ● Manage supplies ● Replace supplies and parts ● Install memory ● Clean the product ENWW 69

Use the HP ToolboxFX software HP ToolboxFX is a program that you can use to complete the following tasks: ● Check the product status. ● Configure the product settings. ● View troubleshooting information. ● View online documentation. You can view HP ToolboxFX when the product is directly connected to...

Status The Status folder contains links to the following main pages: ● Device status . This page indicates product conditions such as a jam or an empty tray. After you correct a problem, click Refresh status to update the product status. ● Supplies status . View details such as the estimated percent...

Alerts The Alerts folder contains links to the following main pages: ● Set up Status Alerts . Set up the product to send you pop-up alerts for certain events, such as low toner levels. ● Set up E-mail Alerts . Set up the product to send you e-mail alerts for certain events, such as low toner levels....

Device Settings The Device Settings folder contains links to the following main pages: ● Device Information . View information such as the product description and a contact person. ● Paper Handling . Configure trays or change the product paper-handling settings, such as default paper size and defaul...

Paper Handling Use these options to configure your default settings. These are the same options that are available onthe control-panel menus on the control panel. For more information, see Use the control-panel menus on page 11 . The following options are available for handling print jobs when the p...

life of the toner supply and might reduce cost per page. However, it will also reduce print quality.The printed image is lighter, but it is adequate for printing drafts or proofs. HP does not recommendfull-time use of EconoMode. If EconoMode is used full-time, it is possible that the toner supply wi...

Manage a network product Embedded Web server The embedded Web server allows you to view product and network status and to manage printingfunctions from your computer. Use the embedded Web server for the following tasks: ● View product status information ● Determine the remaining life on all supplies...

Settings tab This tab allows you to configure the product from your computer. If this product is networked, consultwith the network administrator before changing settings on this tab. Networking tab This tab allows the network administrator to control network-related settings for the product when it...

Lock the product The product has a slot that you can use to attach a cable-type security lock. ENWW Lock the product 79

Manage supplies Using, storing, and monitoring the print cartridge can help ensure high-quality output. Supplies life For information regarding specific product yield, see www.hp.com/go/learnaboutsupplies.com . To order supplies, see Supplies and accessories on page 131 . Manage the print cartridge ...

Replace supplies and parts Supply replacement guidelines Keep the following guidelines in mind when setting up the product. ● Sufficient space is required above and in the front of the product for removing supplies. ● The product should be located on a flat, sturdy surface. NOTE: Hewlett-Packard rec...

3. Reinsert the print cartridge into the product, and then close the print-cartridge door. If the print is still light, install a new print cartridge. Change the print cartridge When a print cartridge approaches the end of useful life, you are prompted to order a replacement. Youcan continue printin...

Install memory NOTE: Single inline memory modules (SIMMs) used in previous HP LaserJet products are not compatible with the product. Install product memory This product has one DIMM slot. CAUTION: Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic wrist strap or freq...

7. Close the access door, and press firmly until it snaps into place. 8. Reconnect the interface cables and the power cord. 9. Turn the product on. Check DIMM installation After installing the DIMM, make sure that the installation was successful. 1. Turn the product on. Check that the Ready light is...

Use the following guidelines if you use the page description language (PDL) ability to mark resourcesas permanent. For technical details, see an appropriate PDL reference for PCL or PS. ● Mark resources as permanent only when it is absolutely necessary that they remain in memorywhile the product is ...

Clean the product Clean the outside of the printer with a clean, damp cloth when necessary. CAUTION: Do not use ammonia-based cleaners on or around the printer. During the printing process, paper, toner, and dust particles can accumulate inside the printer. Overtime, this buildup can cause print qua...

Clean the Tray 1 pickup roller If the product is having trouble picking up paper from Tray 1, follow these instructions. 1. Turn the product off, disconnect the power cord, and wait for the product to cool. –10 10 20 30 40 50 60 70 80 90 100 0 Celcius °C 2. Push the button to open the print-cartridg...

12. Reconnect the power cord, and turn the product on. Clean the Tray 2 pickup roller If the product is having trouble picking up paper from Tray 2, follow these instructions. 1. Turn the product off, disconnect the power cord and wait for the product to cool. –10 10 20 30 40 50 60 70 80 90 100 0 Ce...

10 Solve problems ● Solve general problems ● Restore factory settings ● Interpret control-panel messages ● Jams ● Solve print-quality problems ● Solve performance problems ● Solve connectivity problems ● Solve common Windows problems ● Solve common Macintosh problems ● Solve Linux problems ENWW 99

Solve general problems If the product is not responding correctly, complete the steps in the following checklist, in order. If theproduct does not pass a step, follow the corresponding troubleshooting suggestions. If a step resolvesthe problem, you can stop without performing the other steps on the ...

8. Verify that you have installed the printer driver for this product. Check the program to make surethat you are using the printer driver for this product. 9. Print a short document from a different program that has worked in the past. If this solution works,then the problem is with the program you...

Interpret control-panel messages The control-panel messages indicate the current product status or situations that might require action. Control-panel messages appear temporarily and might require that you acknowledge the message bypressing OK to resume printing or by pressing X to cancel the job. W...

Jams Common causes of jams Many jams are caused by using paper that does not meet HP specifications. For complete paperspecifications for all HP LaserJet products, see the HP LaserJet Printer Family Print Media Guide . This guide is available at www.hp.com/support/ljpaperguide . The product is jamme...

Jam locations Jams can occur at the following locations in the product. 1 3 2 1 Internal areas 2 Input trays 3 Output bins Clear jams When clearing jams, be careful not to tear jammed paper. If a small piece of paper remains in the product,it could cause additional jams. CAUTION: Before clearing jam...

8. Close the jam-release door. Input trays Tray 1 1. Push the button to open the print-cartridge door, and then remove the print cartridge. CAUTION: To prevent damage, do not expose the print cartridge to light. Cover it with a piece of paper. 2. Lift the Tray 1 roller cover, grasp the jammed paper,...

4. If no jammed paper is visible in the tray area, open the print-cartridge door, remove the printcartridge, and pull down the upper media guide. With both hands, grasp the jammed paper andslowly pull it out of the product. 5. Replace the print-cartridge, and close the print-cartridge door. Output b...

Solve print-quality problems You can prevent most print-quality problems by following these guidelines. ● Configure the trays for the correct paper-type setting. See Configure trays on page 54 . ● Use paper that meets HP specifications. See Paper and print media on page 43 . ● Clean the product as n...

Image defect examples This section provides information about identifying and correcting print defects. NOTE: If these steps do not correct the problem, contact an HP-authorized dealer or service representative. Light print or faded ● The print cartridge is nearing end of life. ● Redistribute the to...

Vertical repetitive defects ● The print cartridge might be damaged. If a repetitive markoccurs at the same spot on the page, install a newHP print cartridge. ● The internal parts might have toner on them. If the defectsoccur on the back of the page, the problem will probablycorrect itself after a fe...

lower fuser temperature, such as transparencies or lightmedia. Wrinkles or creases ● Make sure that media is loaded properly. ● Check the media type and quality. ● Open the straight-through output door and try printingstraight through. ● Turn over the stack of media in the tray. Also, try rotatingth...

Solve performance problems Problem Cause Solution Pages print but are totally blank. The sealing tape might still be in the printcartridges. Verify that the sealing tape has beencompletely removed from the printcartridges. The document might contain blankpages. Check the document that you are printi...

Solve connectivity problems Solve direct-connect problems If you have connected the product directly to a computer, check the cable. ● Verify that the cable is connected to the computer and to the product. ● Verify that the cable is not longer than 2 meters (6 feet). Replace the cable if necessary. ...

Solve common Windows problems Error message: "General Protection FaultException OE" "Spool32" "Illegal Operation" Cause Solution Close all software programs, restart Windows, and try again. Select a different printer driver. You can usually do this from asoftware program. Del...

Solve common Macintosh problems NOTE: Setup for USB and IP printing is performed through the Desktop Printer Utility. The product will not appear in the Chooser. The printer driver is not listed in Print Center. Cause Solution The product software might not have been installed or wasinstalled incorr...

When connected with a USB cable, the product does not appear in the Macintosh Print Center after the driver isselected. Cause Solution This problem is caused by either a software or a hardwarecomponent. Software problem-solving ● Check that your Macintosh supports USB. ● Verify that you are using a ...

A Supplies and accessories ● Order parts, accessories, and supplies ● Part numbers ENWW 131

Order parts, accessories, and supplies Several methods are available for ordering parts, supplies, and accessories. Order directly from HP You can obtain the following items directly from HP: ● Replacement parts: To order replacement parts in the U.S., go to www.hp.com/go/hpparts . Outside the Unite...

Part numbers The following list of accessories was current at the time of printing. Ordering information and availabilityof the accessories might change during the life of the product. Paper-handling accessories Item Description Part number Optional 500-sheet tray and feeder unit Optional tray to in...

B Service and support ● Hewlett-Packard limited warranty statement ● Print cartridge limited warranty statement ● End User License Agreement ● Customer self-repair warranty service ● Customer support ● HP maintenance agreements ENWW 135

Hewlett-Packard limited warranty statement HP PRODUCT DURATION OF LIMITED WARRANTY HP LaserJet P2055d, P2055dn, P2055x One year from date of purchase HP warrants to you, the end-user customer, that HP hardware and accessories will be free from defectsin materials and workmanship after the date of pu...

Print cartridge limited warranty statement This HP product is warranted to be free from defects in materials and workmanship. This warranty does not apply to products that (a) have been refilled, refurbished, remanufactured ortampered with in any way, (b) experience problems resulting from misuse, i...

End User License Agreement PLEASE READ CAREFULLY BEFORE USING THIS SOFTWARE PRODUCT: This End-User LicenseAgreement (“EULA”) is a contract between (a) you (either an individual or the entity you represent) and(b) Hewlett-Packard Company (“HP”) that governs your use of the software product (“Software...

Customer self-repair warranty service HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time andallow for greater flexibility in performing defective parts replacement. If during the diagnosis period, HPidentifies that the repair can be accomplished by the use of...

Customer support Get telephone support, free during your warranty period, foryour country/region Have the product name, serial number, date of purchase, andproblem description ready. Country/region phone numbers are on the flyer that was in thebox with your product or at www.hp.com/support/ . Get 24...

HP maintenance agreements HP has several types of maintenance agreements that meet a wide range of support needs.Maintenance agreements are not part of the standard warranty. Support services may vary by area.Check with your local HP dealer to determine the services available to you. On-site service...

Extended warranty HP Support provides coverage for the HP hardware product and all HP-supplied internal components.The hardware maintenance covers a 1- to 3-year period from date of the HP product purchase. Thecustomer must purchase HP Support within the stated factory warranty. For more information...

C Specifications ● Physical specifications ● Power consumption and acoustic emissions ● Operating environment ENWW 145

Physical specifications Table C-1 Product dimensions and weights Product model Height Depth Width Weight HP LaserJet P2050 Series d model 268 mm (10.6 in) 368 mm (14.5 in) 360 mm (14.2 in) 10.6 kg (23.4 lb) HP LaserJet P2050 Series dn model 268 mm (10.6 in) 368 mm (14.5 in) 360 mm (14.2 in) 10.6 kg ...

D Regulatory information ● FCC regulations ● Environmental product stewardship program ● Declaration of conformity ● Safety statements ENWW 147

Environmental product stewardship program Protecting the environment Hewlett-Packard Company is committed to providing quality products in an environmentally soundmanner. This product has been designed with several attributes to minimize impacts on our environment. Ozone production This product gene...

Return and recycling instructions United States and Puerto Rico The enclosed label in the HP LaserJet toner cartridge box is for the return and recycling of one or moreHP LaserJet print cartridges after use. Please follow the applicable instructions below. Multiple returns (more than one cartridge) ...

Declaration of conformity Declaration of conformity Declaration of Conformity according to ISO/IEC 17050-1 and EN 17050-1, DoC#: BOISB-0801-00-rel.1.0 Manufacturer's Name: Hewlett-Packard Company Manufacturer's Address: 11311 Chinden Boulevard,Boise, Idaho 83714-1021, USA declares, that the product ...

Safety statements Laser safety The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration hasimplemented regulations for laser products manufactured since August 1, 1976. Compliance ismandatory for products marketed in the United States. The device is certified as...

Laser statement for Finland Luokan 1 laserlaite Klass 1 Laser Apparat HP LaserJet P2055d, P2055dn, P2055x , laserkirjoitin on käyttäjän kannalta turvallinen luokan 1laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteenulkopuolelle. Laitteen turvallisuusluokk...

Index A A6-size paper loading 52accessibility features 4accessories available 3ordering 132part numbers 133 acoustic specifications 146advanced printing options Windows 67 alerts setting up 72viewing with HP ToolboxFX 73 Alerts tab, HP ToolboxFX 73alternative letterhead mode 67anticounterfeit suppli...