HP NC522SFP - Manual

Introduction 6 Introduction Overview The HP NC522SFP Dual Port 10 GbE Server Adapter is a dual port PCI Express (PCIe) 10 Gigabit ProLiant Ethernet adapter. The network connection is made through two 10GBASE-SFP+ modules. In addition to standard HP network server adapter features, the NC522SFP is ca...

Installing an adapter 9 Installing an adapter Installation overview This section describes installation precautions, how to install the adapter, and how to connect the network cable. WARNING: To reduce the risk of personal injury or damage to the equipment, consult the safety information and user do...

Installing an adapter 10 Installing an adapter in a server See the HP ProLiant server documentation for additional information on how to safely install a PCI Express card in the server. CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power cord from the power outle...

Installing an adapter 11 2. Using a correctly sized Phillips head screwdriver, carefully remove the two board lock screws located at the top and bottom of the connector. 3. Remove the standard profile bracket and place the low profile bracket over the connector. Be careful not to damage the connecto...

Specifications 12 Specifications Cable specifications SFP+ modules or copper cable Fiber type Cable grade Minimum modal bandwidth @ 850 nm (MHz-km) Operating range (meters) 10GBASE-SR (short range) 62.5 µm MMF 62.5 µm MMF 50 µm MMF 50 µm MMF FDDI OM1 OM2 OM3 160 200 500 2000 2 to 26 2 to 33 2 to 82 ...

Specifications 13 Compliance Standard Other PCIe v2.0 RoHS 6 of 6 IPv4, IPv6 CE ACPI 1.1a Microsoft WHQL (Windows Hardware Quality Labs) Server Design Guide version 3.0 (SDG 3.0) Power and environmental specifications Power and environmental specifications Value Operating Temperature 32° to 131° F (...

Regulatory compliance notices 14 Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the pro...

Regulatory compliance notices 15 Canadian notice This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Korean class A not...

Electrostatic discharge 16 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boar...

Acronyms and abbreviations 17 Acronyms and abbreviations CSA Canadian Standards Association DMA direct memory access IEEE Institute of Electrical and Electronics Engineers iSCSI Internet Small Computer System Interface PCI Express Peripheral Component Interconnect Express RDMA Remote Direct Memory A...

Index 18 A adapter LEDs 6 adapters 6 B bracket, low profile 10 C cables, networking 11 compliance 12, 14 contact information 5 D disposal, waste 15 downloading files 5 E electrostatic discharge 9, 16 environmental specifications 13 F features 6 G grounding methods 16 L LC connector 11 LEDs 6 low pro...