HP LE2001W - Manual

2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set...

● Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMP...

3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Attaching the Monitor Base 1. Set the base on a flat surface such as a table top. 2. Using both hands, position the ped...

Connecting the Cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Dis...

LE1851wt Model (Connecting for MultiSeat Computing) 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on the T150 multiseat computing device. 3. Conn...

Adjusting the Monitor Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-7 Tilting the Monitor Turning on the Monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-i...

2. Slide the multiseat computing device onto the bracket. Figure 3-11 Installing the MultiSeat Computing Device 3. Connect the cables. Refer to LE1851wt Model (Connecting for MultiSeat Computing) on page 7 for instructions on connecting the cables. Locating the Rating Labels The rating labels on the...

4 Operating the Monitor Software and Utilities The CD that comes with the monitor contains files you can install on the computer: ● an .INF (Information) file ● an .ICM (Image Color Matching) file ● auto-adjustment pattern utility ● additional software for the monitor model NOTE: If the monitor does...

Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the CD or download them. Installing from the CD To install the .INF and .ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu is d...

Front Panel Controls Table 4-1 Monitor Front Panel Controls Control Function 1 Menu Opens, selects or exits the OSD menu. 2 Minus Volume/Minus(LE2001wm model only) If the OSD menu is on, press to navigate backward throughthe OSD menu and decrease adjustment levels. If the OSD menu is inactive, press...

Adjusting the Monitor Settings The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display Assistant utility. NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults by opening the OSD and selecting Factory Reset...

OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: ● Cancel —to return to the previous menu level. ● Save and Return —to save all ch...

Optimizing Image Performance Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase. NOTE: The Clock and Clock Phase controls are adjustable only when using an analog input. These controls are not adjustable for digital inputs. The Clock must first ...

To correct screen position (Horizontal Position or Vertical Position): 1. Press the Menu button on the monitor's front panel to open the OSD Menu, and then select Image Control > Horizontal Position and/or Vertical Position . 2. Press the + (Plus) or – (Minus) buttons on the monitor's front panel...

Identifying Monitor Conditions Special messages will appear on the monitor screen when identifying the following monitor conditions: ● Input Signal Out of Range—Change resolution setting to 1366 x 768 – 60Hz — Indicates the monitor does not support the input signal because the resolution and/or refr...

Sleep Timer Mode The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to power on and off at the same time every day. This also extends the life of the backlight bulbs in the monitor. The Sleep Timer has five settings: ● Set Current Time ● Set Sleep Time ● ...

sRGB Support The monitor is designed to support sRGB for color management, which adapts to the color standards used in the image technology industry. To take advantage of the sRGB support, you will need to change the monitor’s color temperature to sRGB and install the sRGB color profile (ICM) file. ...

7. On the Devices tab, click the Add button. 8. Select the RGB Color Space Profile.icm file, then click the OK button. 9. To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select sRGB Color Space Profile , then click the Set as Default button. Installing th...

A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power button on front panel ofthe monitor is ...

Problem Possible Cause Solution OSD Lockout is displayed. The monitor's OSD Lockoutfunction is enabled. Press and hold the Menu button for 10 seconds todisable the OSD Lockout function. Power Button Lockout is displayed. The monitor's Power ButtonLockout function is enabled. Press and hold the power...

B Technical Specifications NOTE: All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher ...

Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognized these preset modes and they will appear properly sized and centered on the screen. LE1851w, LE1851wl, and LE1851wt Model...

Entering User Modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not using a standard graphics adapter. ● You are not using a preset mode. It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Yo...

C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res...

Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact:Hewlett Packard CompanyP. O. Box 692000, Mail Stop 510101Houston, Texas 77269-2000Or, call (281) 514-3333To identify this product, refer to the Part, Series, or Model number found on the product. Canadian...

Japanese Power Cord Requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Product Environmental Notices ENERGY STAR® Qualification HP Displays marked with the ENERGY STAR® certification ...

Materials Disposal Some HP products contain mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life.Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities o...

Turkey EEE Regulation In Conformity with the EEE RegulationEEE Yönetmeli ğ ine Uygundur ENWW Product Environmental Notices 41