HP L2335 - Manual

User’s Guide www.hp.com 2–1 2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monito...

2–2 www.hp.com User’s Guide Safety and Maintenance Guidelines Ä CAUTION: For the protection of your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power st...

2–4 www.hp.com User’s Guide Safety and Maintenance Guidelines Cleaning the Monitor To clean the monitor, follow these steps: 1. Turn off the monitor and the computer. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a ...

User’s Guide www.hp.com 3–1 3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect one end ...

3–6 www.hp.com User’s Guide Setting Up the Monitor Removing the Monitor Base You can remove the monitor base to mount the monitor on a wall, swing arm, or other mounting fixture. Read the caution and warning statements below before beginning the procedure. Ä CAUTION: Before beginning to disassemble ...

3–8 www.hp.com User’s Guide Setting Up the Monitor Mounting the Monitor 1. Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section. When the base is removed, four threaded mounting holes are exposed on the monitor panel to be used for mounting purposes. These moun...

User’s Guide www.hp.com 4–1 4 Operating the Monitor Installing the Information Files The CD-ROM included with this monitor contains two information files to be installed onto your computer; an .INF file and an .ICM file. ■ The .INF file defines monitor resources and provides specifications used by m...

4–2 www.hp.com User’s Guide Operating the Monitor Front Panel Components No. Icon Control Function 1 PiP PiP button Activates Picture in Picture (PiP) window 2 input Signal Input button Signal input selection - scrolls through VGA-Analog, DVI-Analog, DVI-Digital, Super video, composite video, and co...

4–4 www.hp.com User’s Guide Operating the Monitor Adjusting Monitor Settings Press the Menu button on the front panel of the monitor to view the On Screen Display (OSD) Menu. The Main Menu window pops up and you can make adjustments to your monitor’s various features. Use the left, right, up, and do...

4–8 www.hp.com User’s Guide Operating the Monitor Identifying Special OSD Messages Special OSD messages appear on the monitor screen when identifying the following monitor conditions: ■ Input Signal Out of Range—indicates the monitor is unable to access or fully support the provided input signal. Th...

Operating the Monitor User’s Guide www.hp.com 4–9 Optimizing Digital Conversion This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase. U...

User’s Guide www.hp.com A–1 A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank or the No Input Signal message is displayed. Power cord is disconnecte...

A–2 www.hp.com User’s Guide Troubleshooting Using the Worldwide Web Before contacting customer services, refer to the support Web site at: http://www.hp.com/support Image appears blurred, indistinct, or too dark. Brightness and contrast are too low. Press the Menu button to open the OSD Menu, and ad...

Troubleshooting User’s Guide www.hp.com A–3 Preparing to call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ■ The monitor ■ Monitor model number (on front...

User’s Guide www.hp.com B–1 B Specifications Flat Panel Monitor L2335 DisplayType 23 inchesWide screen TFT LCD 58.4 cm Viewable Image Size 23-inch diagonal 58.4 cm TiltSwivel -5 to 25 o +35 to - 35 o Face Treatment Anti-glare polarizer with hard coating Maximum Weight(Unpacked) 24 lbs. 10.5 kg Dimen...

Specifications User’s Guide www.hp.com B–3 Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the sc...

B–4 www.hp.com User’s Guide Specifications ✎ Display modes 19 and 25 are supported by the analog signal input only. Entering User Modes The video controller signal may occasionally call for a mode that is not preset if: ■ You are not using a Hewlett Packard standard graphics adapter. ■ You are not u...

Specifications User’s Guide www.hp.com B–5 Using the Energy Saver Feature When the monitor is in its normal operating mode, the monitor uses less than 100 watts of power and the Power light is green. The monitor also supports a reduced power state. The reduced power state will be entered into if the...

User’s Guide www.hp.com C–1 C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against h...

C–2 www.hp.com User’s Guide Agency Regulatory Notices Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard may void the user's authority to operate the equipment. Cables Connections to this dev...

Agency Regulatory Notices User’s Guide www.hp.com C–3 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet apparei...

C–4 www.hp.com User’s Guide Agency Regulatory Notices Japanese Notice Korean Notice EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett Packard has determined that this product meets th...

Agency Regulatory Notices User’s Guide www.hp.com C–5 Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100-120V or 200-240V. The power cord set (flexible cord or wall plug) recei...

C–6 www.hp.com User’s Guide Agency Regulatory Notices HP Recycling Program HP offers product end-of-life return programs for HP and other manufacturers’ hardware in several geographic areas. The terms and availability of these programs vary by geography because of differences in regulatory requireme...